Package: aespipe
Description-md5: 2ddca24ac9f8c8110258c420a625301a
Description-en: AES-encryption tool with loop-AES support
 aespipe is an encryption tool that reads from standard input and
 writes to standard output. It uses the AES (Rijndael) cipher.
 .
 aespipe can be used for non-destructive in-place encryption
 of existing disk partitions for use with the loop-AES encrypted
 loopback kernel module.
 .
 It can also be used as an encryption filter to create and restore
 encrypted tar/cpio backup archives and to read/write and convert
 loop-AES compatible encrypted images.
 .
 Note that aespipe does not store any length information with the
 encrypted images, so it cannot be used as general purpose filter
 for encryption, but only for certain formats like tar.

Package: apt-transport-https
Description-md5: 42fb3fe23b1b826709a68809c25a3897
Description-en: transitional package for https support
 This is a dummy transitional package - https support has been moved into
 the apt package in 1.5. It can be safely removed.

Package: argon2
Description-md5: 0dde3f6fd43fb48a8ee4a31c6947697a
Description-en: memory-hard hashing function - utility
 Argon2 is a password-hashing function that can be used to hash passwords
 for credential storage, key derivation, or other applications.
 .
 There are two main versions of Argon2: Argon2i and Argon2d.
 Argon2i is the safest against side-channel attacks, while Argon2d provides
 the highest resistance against GPU cracking attacks.
 .
 Argon2i and Argon2d are parametrized by:
  * A time cost, which defines the amount of computation realized and
    therefore the execution time, given in number of iterations
  * A memory cost, which defines the memory usage, given in kibibytes
  * A parallelism degree, which defines the number of parallel threads
 .
 This package contains the argon2 tool for hashing data on the command-line.

Package: arno-iptables-firewall
Description-md5: 40c5315d53ac308b897f9f3317b213b0
Description-en: single- and multi-homed firewall script with DSL/ADSL support
 Unlike other lean iptables front ends in Debian, arno-iptables-firewall
 will setup and load a secure, restrictive firewall by just asking a few
 questions. This includes configuring internal networks for internet access
 via NAT and potential network services (e.g. HTTP or SSH).
 .
 However, it is in no way restricted to this simple setup. Some catch words
 of additional features, that can be enabled in the well documented
 configuration file are: DSL/ADSL, port forwarding, DMZ, port-scan detection,
 MAC address filtering.
 .
 Moreover, it comes with an extensive set of plugins to cover further
 requirements. For example SSH brute force protection, traffic shaping,
 traffic accounting, VPN support to just mention a few.

Package: aspell-sk
Description-md5: 14f7501c7ff44455ed3313df9f996f57
Description-en: Slovak dictionary for GNU Aspell
 This package contains all the required files to add support for the
 Slovak language to the GNU Aspell spell checker.
 .
 This package is built from the Slovak dictionary for hunspell.

Package: auto-apt-proxy
Description-md5: db956da48822ce101ca601a8713aeae6
Description-en: automatic detector of common APT proxy settings
 auto-apt-proxy installs itself as an APT proxy autodetector, and detects
 common setups by checking some hosts on the local network for well-known APT
 proxies such as apt-cacher-ng.
 .
 This package is most useful for development environments, and will Do The
 Right Thing for at least these cases:
 .
   * Build chroots, with a proxy running on the host system.
   * Docker/lxc containers, with a proxy running on the host system.
   * Virtual machines with NAT networking, with a proxy running on the host
     system.
   * Any other system, with a proxy running on its default gateway.
   * Systems where the `apt-proxy` hostname resolves to a valid IP address
     and a supported proxy is detected at that address.
 .
 The following APT proxy servers are supported and automatically detected:
   * apt-cacher-ng
   * approx
   * apt-cacher
   * squid-deb-proxy
   * any proxy advertised by an _apt_proxy._tcp SRV record in your domain
 .
 This package has a minimal set of dependencies in order to minimize the
 influence on systems where it is installed.
 .
 This package does not query mDNS SRV records, which would require avahi.
 If you need that, consider the `squid-deb-proxy-client` package instead.

Package: autoflake
Description-md5: 39d5f63c58b99d957e49906057e42ed6
Description-en: Removes unused imports and unused variables in Python code
 By default, autoflake only removes unused imports for modules that are part of
 the standard library. (Other modules may have side effects that make them
 unsafe to remove automatically.) Removal of unused variables is also disabled
 by default.
 .
 Also removes useless 'pass' statements.

Package: avra
Description-md5: 2403543900a2a45a9c78d3a06684dfae
Description-en: assembler for Atmel AVR microcontrollers
 Avra is an assembler for the Atmel's family of AVR 8-bit RISC
 microcontrollers.  It is mostly compatible with Atmel's own assembler,
 but adds new features such as better macro support and additional
 preprocessor directives.

Package: avrdude
Description-md5: 39f53585d0a5d8a4c5c1d57f7789eace
Description-en: software for programming Atmel AVR microcontrollers
 AVRDUDE is an open source utility to download/upload/manipulate the
 ROM and EEPROM contents of AVR microcontrollers using the in-system
 programming technique (ISP).

Package: avrdude-doc
Description-md5: 0b6fe5ae5ad13f400d3869565ce43390
Description-en: documentation for avrdude
 AVRDUDE is an open source utility to download/upload/manipulate the
 ROM and EEPROM contents of AVR microcontrollers using the in-system
 programming technique (ISP).
 .
 This package contains documentation for configuring and running
 AVRDUDE.

Package: awl-doc
Description-md5: daee0931a6920802a9efe4bd7b679cbe
Description-en: Andrew's Web Libraries - API documentation
 This package documents Andrew's Web Libraries.  This is a set
 of hopefully lightweight libraries for handling a variety of
 useful things for web programming, including:
  - Session management
  - User management
  - DB Records
  - Simple reporting
  - DB Schema Updating
  - iCalendar parsing
 .
 This package contains detailed technical documentation for the
 classes and methods in these libraries.

Package: basez
Description-md5: 0818946b0f0b5e51b8873d27ebb3576c
Description-en: base 16/32/64 encode/decode data to standard output
 BaseZ  encodes/decodes  base16,  base32, base32hex, base64 or base64url
 data stream per RFC 4648; MIME base64 Content-Transfer-Encoding per RFC
 2045; or PEM Printable Encoding per RFC 1421.
 .
 This binary package provides a list of commands: basez hex base16
 base32plain base32hex base64plain base64url base64mime base64pem

Package: bettercap-caplets
Description-md5: 4421fdd27a438d40696a09fe97292739
Description-en: Bettercap scripts (caplets) and proxy modules
 This package contains Bettercap scripts (caplets) and proxy modules. The
 bettercap's interactive sessions can be scripted with .cap files, or caplets.

Package: bird2
Description-md5: 874644189b6bd30d36505beb812c9640
Description-en: Internet Routing Daemon
 BIRD is an Internet routing daemon with full support for all the major
 routing protocols. It allows redistribution between protocols with a
 powerful route filtering syntax and an easy-to-use configuration
 interface.
 .
 BIRD supports IPv4 and IPv6 versions of OSPF, RIP, BGP and Babel routing
 protocols. It also supports supplementary protocols like BFD, RPKI-Router
 and IPv6 router advertisements.

Package: bird2-doc
Description-md5: 1ced61660e9937b21315d53a620aa063
Description-en: Internet Routing Daemon - documentation
 BIRD is an Internet routing daemon with full support for all the major
 routing protocols. It allows redistribution between protocols with a
 powerful route filtering syntax and an easy-to-use configuration
 interface.
 .
 This package provides the user and developer documentation.

Package: bolt-15
Description-md5: a5816535f62942b4fcded9b86fb66840
Description-en: Post-link optimizer
 It achieves the improvements by optimizing application's code layout based on
 execution profile gathered by sampling profiler.

Package: bolt-16
Description-md5: a5816535f62942b4fcded9b86fb66840
Description-en: Post-link optimizer
 It achieves the improvements by optimizing application's code layout based on
 execution profile gathered by sampling profiler.

Package: cgreen1
Description-md5: 6da36e27bf556319dacc0049edb340f4
Description-en: Cgreen Library - Library tool
 A modern unit test and mocking framework for C and C++. Cgreen features
    - fast build, clean code, highly portable
    - simple auto-discovery of tests
    - fluent, expressive and readable API
    - each test runs in isolation to prevent cross-test dependencies
    - built-in mocking for C, compatible other C++ mocking librarie
 Provides the Unittest test tool

Package: chaos-marmosets
Description-md5: 19e801f992c8530dc67892e22228bc90
Description-en: Small chaos monkey programs
 This project contains small programs that behave badly. They can be used for
 chaos engineering to test the system behavior and the infrastructure setup for
 those cases.
 .
 divide-by-zero tries to divide a number by zero. It will immediately exit with
 signal 4 (SIGILL). This program is useful to test the process core dump
 configuration. In case of using a bug reporting system like apport, this
 program allows testing reporting the crash and retracing it.
 .
 leak-memory: This program will eat your memory like Obelix eats cake until it
 will eventually trigger the out of memory (OOM) killer. This program is useful
 to test configured cgroups memory limitations and the OOM killer behavior.
 .
 seg-fault: This program tries write to address zero and will trigger a
 segmentation fault (signal 11). It is useful to test the process core dump
 configuration. In case of using a bug reporting system like apport, this
 program allows testing reporting the crash and retracing it.

Package: cl-consfigurator
Description-md5: 72c33d706b688275e6f5f34d3cd9b431
Description-en: Lisp declarative configuration management system
 Consfigurator is a system for declarative configuration management using
 Common Lisp.  You can use it to configure hosts as root, deploy services as
 unprivileged users, build and deploy containers, install operating systems,
 produce disc images, and more.  Some key advantages:
 .
  * Apply configuration by transparently starting up another Lisp image on the
    machine to be configured, so that you can use the full power of Common Lisp
    to inspect and control the host.
 .
  * Also define properties of hosts in a more restricted language, that of
    :POSIX properties, to configure machines, containers and user accounts
    where you can't install Lisp.  These properties can be applied using just
    an SSH or serial connection, but they can also be applied by remote Lisp
    images, enabling code reuse.
 .
  * Flexibly chain and nest methods of connecting to hosts.  For example, you
    could have Consfigurator SSH to a host, sudo to root, start up Lisp, use
    the setns(2) system call to enter a Linux container, and then deploy a
    service.  Secrets, and other prerequisite data, are properly passed along.
 .
  * Combine declarative semantics for defining hosts and services with a
    multiparadigmatic general-purpose programming language that won't get in
    your way.
 .
 Declarative configuration management systems like Consfigurator and Propellor
 share a number of goals with projects like the GNU Guix System and NixOS.
 However, tools like Consfigurator and Propellor try to layer the power of
 declarative and reproducible configuration semantics on top of traditional,
 battle-tested UNIX system administration infrastructure like distro package
 managers, package archives and daemon configuration mechanisms, rather than
 seeking to replace any of those.  Let's get as much as we can out of all that
 existing distro policy-compliant work!

Package: clang-15
Description-md5: c364160e44345420df0f2e97b3082b69
Description-en: C, C++ and Objective-C compiler
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.

Package: clang-15-doc
Description-md5: 6bf5242bfe6f159fd907beb982f2315f
Description-en: C, C++ and Objective-C compiler - Documentation
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the documentation.

Package: clang-15-examples
Description-md5: c2fd51cc2d722b8e5b1c1549d931bc06
Description-en: Clang examples
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang examples.

Package: clang-16
Description-md5: c364160e44345420df0f2e97b3082b69
Description-en: C, C++ and Objective-C compiler
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.

Package: clang-16-doc
Description-md5: 6bf5242bfe6f159fd907beb982f2315f
Description-en: C, C++ and Objective-C compiler - Documentation
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the documentation.

Package: clang-16-examples
Description-md5: c2fd51cc2d722b8e5b1c1549d931bc06
Description-en: Clang examples
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang examples.

Package: clang-format-15
Description-md5: 5fdb7838fa336de9de2703cb644c12e4
Description-en: Tool to format C/C++/Obj-C code
 Clang-format is both a library and a stand-alone tool with the goal of
 automatically reformatting C++ sources files according to configurable
 style guides. To do so, clang-format uses Clang's Lexer to transform an
 input file into a token stream and then changes all the whitespace around
 those tokens. The goal is for clang-format to both serve both as a user
 tool (ideally with powerful IDE integrations) and part of other
 refactoring tools, e.g. to do a reformatting of all the lines changed
 during a renaming.
 .
 This package also provides vim and emacs plugins.

Package: clang-format-16
Description-md5: 5fdb7838fa336de9de2703cb644c12e4
Description-en: Tool to format C/C++/Obj-C code
 Clang-format is both a library and a stand-alone tool with the goal of
 automatically reformatting C++ sources files according to configurable
 style guides. To do so, clang-format uses Clang's Lexer to transform an
 input file into a token stream and then changes all the whitespace around
 those tokens. The goal is for clang-format to both serve both as a user
 tool (ideally with powerful IDE integrations) and part of other
 refactoring tools, e.g. to do a reformatting of all the lines changed
 during a renaming.
 .
 This package also provides vim and emacs plugins.

Package: clang-tidy-15
Description-md5: 239d974b460ce0b6a914aa94c05888ad
Description-en: clang-based C++ linter tool
 Provide an extensible framework for diagnosing and fixing typical programming
 errors, like style violations, interface misuse, or bugs that can be deduced
 via static analysis. clang-tidy is modular and provides a convenient interface
 for writing new checks.

Package: clang-tidy-16
Description-md5: 239d974b460ce0b6a914aa94c05888ad
Description-en: clang-based C++ linter tool
 Provide an extensible framework for diagnosing and fixing typical programming
 errors, like style violations, interface misuse, or bugs that can be deduced
 via static analysis. clang-tidy is modular and provides a convenient interface
 for writing new checks.

Package: clang-tools-15
Description-md5: da24a5a87f39211c1ff10f03f06e0a3c
Description-en: clang-based tools for C/C++ developments
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains some clang-based tools like scan-build, clang-cl, etc.

Package: clang-tools-16
Description-md5: da24a5a87f39211c1ff10f03f06e0a3c
Description-en: clang-based tools for C/C++ developments
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains some clang-based tools like scan-build, clang-cl, etc.

Package: clangd-15
Description-md5: 9ae9ea58c7af3228199dd96c36ecd0bb
Description-en: Language server that provides IDE-like features to editors
 clangd understands your C++ code and adds smart features to your editor:
  - code completion
  - compile errors
  - go-to-definition
  - and more.
 .
 clangd is a language server that implements the Language Server Protocol;
 it can work with many editors through a plugin.

Package: clangd-16
Description-md5: 9ae9ea58c7af3228199dd96c36ecd0bb
Description-en: Language server that provides IDE-like features to editors
 clangd understands your C++ code and adds smart features to your editor:
  - code completion
  - compile errors
  - go-to-definition
  - and more.
 .
 clangd is a language server that implements the Language Server Protocol;
 it can work with many editors through a plugin.

Package: cockpit-machines
Description-md5: 0eb6768a5275b934fab3627c568646c9
Description-en: Cockpit user interface for virtual machines
 The Cockpit Web Console enables users to administer GNU/Linux servers using a
 web browser.
 .
 This package adds an user interface for managing virtual machines.
 .
 If the "virtinst" package is installed, you can also create new virtual
 machines.

Package: cockpit-podman
Description-md5: bd8bea62609a52119a9f55b9e9e77daf
Description-en: Cockpit component for Podman containers
 The Cockpit Web Console enables users to administer GNU/Linux servers using a
 web browser.
 .
 This package adds an user interface for Podman containers.

Package: cpufreqd
Description-md5: 2e6607a4cd24cc140a7c1cd9613eaaab
Description-en: fully configurable daemon for dynamic frequency and voltage scaling
 cpufreqd is meant to be a replacement of the speedstep applet you can find on
 some other OS, it monitors the system status and selects the most appropriate
 CPU level.  It is fully configurable and easily extensible through the many
 available plug-ins (more to come).
 Despite its name it can be used to control also the NForce2-Atxp1 voltage
 regulator and the core and memory clock for NVidia cards (see README.Debian).
 .
 You need a CPUFreq driver and either APM, ACPI (a recent version) or PMU
 enabled in your kernel in order for this daemon to work.

Package: cryfs
Description-md5: 6a193616bfd007a57999d6d65d2c809f
Description-en: encrypt your files and store them in the cloud
 CryFS encrypts your files, so you can safely store them anywhere. It works
 well together with cloud services like Dropbox, iCloud, OneDrive and others.

Package: davical
Description-md5: 0ba62411c9e2ac58db7899c80a834734
Description-en: PHP CalDAV and CardDAV Server
 The DAViCal CalDAV Server is designed to store CalDAV calendars and
 CardDAV addressbooks, such as those from Evolution, Sunbird/Lightning,
 Mulberry, iCal, iPhone or SOHO Organizer, in a central location,
 providing shared calendars, free/busy publication and a
 basic administration interface.

Package: davical-doc
Description-md5: ffcf6b90911c2a5fef8a3fff3b48d66e
Description-en: PHP CalDAV and CardDAV Server - technical documentation
 The DAViCal CalDAV Server is designed to store CalDAV calendars and
 CardDAV addressbooks, such as those from Evolution, Sunbird/Lightning,
 Mulberry, iCal, iPhone or SOHO Organizer, in a central location,
 providing shared calendars, free/busy publication and a
 basic administration interface.
 .
 This package contains detailed technical documentation for the
 classes and methods in the DAViCal programs. Some user-centric
 configuration documentation is also included.

Package: dcfldd
Description-md5: 5bc0ea184493944a867f4a5e09429f11
Description-en: enhanced version of dd for forensics and security
 dcfldd was initially developed at Department of Defense Computer Forensics
 Lab (DCFL). This tool is based on the dd program with the following additional
 features:
 .
  - Hashing on-the-fly: dcfldd can hash the input data as it is being
    transferred, helping to ensure data integrity.
  - Status output: dcfldd can update the user of its progress in terms of the
    amount of data transferred and how much longer operation will take.
  - Flexible disk wipes: dcfldd can be used to wipe disks quickly and with a
    known pattern if desired.
  - Image/wipe verify: dcfldd can verify that a target drive is a bit-for-bit
    match of the specified input file or pattern.
  - Multiple outputs: dcfldd can output to multiple files or disks at the same
    time.
  - Split output: dcfldd can split output to multiple files with more
    configurability than the split command.
  - Piped output and logs: dcfldd can send all its log data and output to
    commands as well as files natively.
  - When dd uses a default block size (bs, ibs, obs) of 512 bytes, dcfldd uses
    32768 bytes (32 KiB) which is HUGELY more efficient.
  - The following options are present in dcfldd but not in dd: ALGORITHMlog:,
    errlog, hash, hashconv, hashformat, hashlog, hashlog:, hashwindow, limit,
    of:, pattern, sizeprobe, split, splitformat, statusinterval, textpattern,
    totalhashformat, verifylog, verifylog:, vf.

Package: dh-cargo
Description-md5: 5d673cf67735dd305fc8bfe717fef40a
Description-en: debhelper buildsystem for Rust crates using Cargo
 dh-cargo provides a debhelper buildsystem to build Rust crates using Cargo.
 .
 This builds Debian rust crates to be installed into a system-level crate
 registry in /usr/share/cargo/registry containing crates that can be used and
 Build-Depended upon by other Debian packages.
 .
 Debian packages generated by debcargo use this buildsystem; packagers are not
 expected to use this directly. If you have a multi-language program such as
 firefox or librsvg that includes private Rust crates not exposed to others,
 you should instead use Debian's cargo wrapper /usr/share/cargo/bin/cargo in
 the cargo package, and Build-Depends on that instead of this package.

Package: dh-dkms
Description-md5: 1208c8493840cb3bb3d35562e7dec67a
Description-en: debhelper addon for the Dynamic Kernel Module System (DKMS)
 DKMS is a framework designed to allow individual kernel modules to be upgraded
 without changing the whole kernel. It is also very easy to rebuild modules as
 you upgrade kernels.
 .
 This package provides a debhelper add-on 'dkms' that simplifies packaging of
 dkms kernel module source packages.

Package: doona
Description-md5: fd903e2675fc007677179e677c63d857
Description-en: Network fuzzer forked from bed
 Doona is a fork of the Bruteforce Exploit Detector Tool (BED).
 BED is a program which is designed to check daemons for
 potential buffer overflows, format string bugs etc.

Package: dpf-plugins
Description-md5: 9033cff0c7dfdd88a116af6de91cdcf0
Description-en: Audio plugin collection from DISTRHO (metapackage)
 Metapackage pulling-in collection of DPF-based plugins in
 LADSPA, DSSI, LV2 and VST2 formats.
 .
 The list of plugins/packs are:
  - glBars
  - Kars
  - Mini-Series (3BandEQ, 3BandSplitter, PingPongPan)
  - ndc-Plugs (Amplitude Imposer, Cycle Shifter, Soul Force)
  - MVerb
  - Nekobi
  - ProM

Package: dpf-plugins-common
Description-md5: 637bcba5b29b48e7d60a3cc033c5d834
Description-en: Audio plugin collection from DISTRHO (common files)
 Common files for collection of DPF-based plugins in
 LADSPA, DSSI, LV2 and VST2 formats.
 .
 The list of plugins/packs are:
  - glBars
  - Kars
  - Mini-Series (3BandEQ, 3BandSplitter, PingPongPan)
  - ndc-Plugs (Amplitude Imposer, Cycle Shifter, Soul Force)
  - MVerb
  - Nekobi
  - ProM

Package: dpf-plugins-dssi
Description-md5: da1452b4b366812b36128ba23736407d
Description-en: Audio plugin collection from DISTRHO (DSSI plugins)
 Collection of DPF-based plugins in DSSI format.
 .
 The list of plugins/packs are:
  - glBars
  - Kars
  - Mini-Series (3BandEQ, 3BandSplitter, PingPongPan)
  - ndc-Plugs (Amplitude Imposer, Cycle Shifter, Soul Force)
  - MVerb
  - Nekobi
  - ProM

Package: dpf-plugins-ladspa
Description-md5: 9e79808e0ef36a8c231d1a2e9114d617
Description-en: Audio plugin collection from DISTRHO (LADSPA plugins)
 Collection of DPF-based plugins in LADSPA format.
 .
 The list of plugins/packs are:
  - glBars
  - Kars
  - Mini-Series (3BandEQ, 3BandSplitter, PingPongPan)
  - ndc-Plugs (Amplitude Imposer, Cycle Shifter, Soul Force)
  - MVerb
  - Nekobi
  - ProM

Package: dpf-plugins-lv2
Description-md5: 2d8cadaba6b81807d68e4ffd9da19f17
Description-en: Audio plugin collection from DISTRHO (LV2 plugins)
 Collection of DPF-based plugins in LV2 format.
 .
 The list of plugins/packs are:
  - glBars
  - Kars
  - Mini-Series (3BandEQ, 3BandSplitter, PingPongPan)
  - ndc-Plugs (Amplitude Imposer, Cycle Shifter, Soul Force)
  - MVerb
  - Nekobi
  - ProM

Package: dpf-plugins-vst
Description-md5: ee7741ba0e751508ef3a52aa1aac9e7f
Description-en: Audio plugin collection from DISTRHO (VST2 plugins)
 Collection of DPF-based plugins in VST2 format.
 .
 The list of plugins/packs are:
  - glBars
  - Kars
  - Mini-Series (3BandEQ, 3BandSplitter, PingPongPan)
  - ndc-Plugs (Amplitude Imposer, Cycle Shifter, Soul Force)
  - MVerb
  - Nekobi
  - ProM

Package: dpf-source
Description-md5: 8dcbc4d77de205756492aae41674a432
Description-en: DISTRHO Plugin Framework (Source files)
 DPF is designed to make development of new plugins an easy
 and enjoyable task.
 It allows developers to create plugins with custom UIs
 using a simple C++ API.
 The framework facilitates exporting various different
 plugin formats from the same code-base.

Package: dracut
Description-md5: ff5d73107edf988d1308accca8de03f4
Description-en: Initramfs generator using udev
 This package builds a bootable initramfs for Linux kernel packages.  The
 initramfs is loaded along with the kernel and is responsible for
 mounting the root filesystem and starting the main init system.

Package: dracut-config-generic
Description-md5: c252faef47b4ae50105187b4ff9ac26e
Description-en: dracut is an event driven initramfs infrastructure
 This is the dracut configuration to turn off hostonly image generation

Package: dracut-config-rescue
Description-md5: cdbd0e866f1b2aa69a08ff629c17bcc4
Description-en: dracut is an event driven initramfs infrastructure
 This is the dracut configuration to turn on rescue image generation

Package: dracut-core
Description-md5: 5df7edfd996e6db7e65cd0435ed243c3
Description-en: dracut is an event driven initramfs infrastructure (core tools)
 Unlike existing initramfs's, this is an attempt at having as little as
 possible hard-coded into the initramfs as possible.  The initramfs has
 (basically) one purpose in life -- getting the rootfs mounted so that
 we can transition to the real rootfs.  This is all driven off of
 device availability.  Therefore, instead of scripts hard-coded to do
 various things, we depend on udev to create device nodes for us and
 then when we have the rootfs's device node, we mount and carry on.
 Having the root on MD, LVM2, LUKS is supported as well as NFS, iSCSI,
 NBD and FCOE with dracut-network.

Package: dracut-live
Description-md5: 82eda9955b37992c0f2f77558a84b7d8
Description-en: dracut is an event driven initramfs infrastructure (live image modules)
 Package to build a dracut initramfs with live image capabilities.
 .
 This package requires everything which is needed to build an
 initramfs with dracut, with live image capabilities, like Live CDs.

Package: dracut-network
Description-md5: 35b333bb5f6987592870eaf905d6c38d
Description-en: dracut is an event driven initramfs infrastructure (network modules)
 Package to build a dracut initramfs with network support. This
 includes dracut modules for NFS, CIFS, iSCSI, HTTP, NBD, FCP and FCOE.

Package: dracut-squash
Description-md5: 85a5b251b3f335a51a518f8d85951f68
Description-en: dracut is an event driven initramfs infrastructure (squashfs modules)
 Package to build an initramfs with most files in a squashfs image.
 .
 This package provides a dracut module to build an initramfs, but
 store most files in a squashfs image, result in a smaller initramfs
 size and reduce runtime memory usage.

Package: drawtiming
Description-md5: 298416542ae06942859731a9ed0585d7
Description-en: tool for documenting hardware designs through timing diagrams
 Drawtiming is a command-line tool for documenting hardware designs through
 timing diagrams. In inputs textual signal descriptions and outputs image
 timing diagrams in many possible formats.

Package: elpa-corfu
Description-md5: 19a636677b6e5827fa61a48d3f44b420
Description-en: Completion Overlay Region FUnction in Emacs
 Corfu enhances completion at point with a small completion popup. The
 current candidates are shown in a popup below or above the
 point. Corfu is the minimalistic completion-in-region counterpart of
 the Vertico minibuffer UI.

Package: evolution-data-server-tests
Description-md5: f089152abdefc1f27359965309935277
Description-en: Installed tests for the evolution database backend server
 The data server, called "Evolution Data Server" is responsible for managing
 mail, calendar, addressbook, tasks and memo information.
 .
 This package contains test programs, designed to be run as part of a
 regression testsuite.

Package: flang-15
Description-md5: bd017b88c85853e1292c78015b1d62a8
Description-en: Fortran compiler
 Ground-up implementation of a Fortran front end written in
 modern C++.
 .
 While it is capable of generating executables for a number
 of examples, some functionalities are still missing.

Package: flang-16
Description-md5: bd017b88c85853e1292c78015b1d62a8
Description-en: Fortran compiler
 Ground-up implementation of a Fortran front end written in
 modern C++.
 .
 While it is capable of generating executables for a number
 of examples, some functionalities are still missing.

Package: fluidsynth
Description-md5: 7ccb40b5de8c2ddfe43c7da6ffeeea91
Description-en: Real-time MIDI software synthesizer
 Fluidsynth is a real-time midi synthesizer based on the soundfont (sf2 and sf3)
 specifications. It can be used to render MIDI input or MIDI files to audio.
 The MIDI events are read from a MIDI device. The sound is rendered in
 real-time to the sound output device.

Package: frescobaldi
Description-md5: 7e3a8966b55e721550f9e11b9d0e5617
Description-en: LilyPond sheet music text editor
 Frescobaldi is a LilyPond sheet music editor.  It aims to be powerful,
 yet lightweight and easy to use.  Frescobaldi is Free Software, freely
 available under the GNU General Public License.
 .
 Features:
 .
  * Powerful text editor with syntax highlighting and automatic completion
  * Music view with advanced Point & Click
  * MIDI player to proof-listen LilyPond-generated MIDI files
  * MIDI capturing to enter music
  * Powerful Score Wizard to quickly setup a music score
  * Snippet Manager to store and apply text snippets, templates or scripts
  * Use multiple versions of LilyPond, automatically selects the correct version
  * Built-in LilyPond documentation browser and built-in Frescobaldi User Guide
  * Smart layout-control functions like coloring specific objects in the PDF
  * MusicXML, MIDI and ABC import
  * Modern user interface with configurable colors, fonts and keyboard shortcuts
  * Translated into Dutch, English, French, German, Italian, Czech, Russian,
    Spanish, Galician, Turkish, Polish, Brazillian Portuguese and Ukrainian.
 .
 Music functions:
 .
  * Transpose music
  * Change music from relative to absolute and vice versa
  * Change the language used for note names
  * Change the rhythm (double, halve, add/remove dots, copy, paste) etc.
  * Hyphenate lyrics using word-processor hyphenation dictionaries
  * Add spanners, dynamics, articulation easily using the Quick Insert panel
  * Update LilyPond syntax using convert-ly, with display of differences
 .
 In order to use lyric hyphenation, please install your languages' appropriate
 hyphenation packages, e.g. hyphen-fr for French, hyphen-ca for Catalan, etc.
 .
 Frescobaldi is designed to run on all major operating systems (Linux, macOS
 and MS Windows).  It is named after Girolamo Frescobaldi (1583-1643), an
 Italian composer of keyboard music in the late Renaissance and early Baroque
 period.

Package: gcc-snapshot
Description-md5: 04205e24a49d2983b9b94e973a23f42a
Description-en: SNAPSHOT of the GNU Compiler Collection
 This package contains a recent development SNAPSHOT of all files
 contained in the GNU Compiler Collection (GCC).
 .
 The source code for this package has been exported from SVN trunk.
 .
 DO NOT USE THIS SNAPSHOT FOR BUILDING DEBIAN PACKAGES!
 .
 This package will NEVER hit the testing distribution. It is used for
 tracking gcc bugs submitted to the Debian BTS in recent development
 versions of gcc.

Package: ghdl
Description-md5: 898aa78eff5e5684d36c1b7162717375
Description-en: VHDL compiler/simulator
 GHDL is a compiler and simulator for VHDL, a Hardware Description Language.
 GHDL is not an interpreter: it allows you to analyse and elaborate sources to
 generate machine code from your design. Native program execution is the only
 way for high speed simulation.
 .
 GHDL offers three machine code generation backends: one based on GCC, one
 using the LLVM compiler suite and a GHDL specific one called mcode. These are
 available in the ghdl-gcc, ghdl-llvm and ghdl-mcode packages respectively.
 Both the GCC and LLVM backends create highly optimized code for excellent
 simulation performance while simulations compiled with the GCC backend also
 allow coverage testing using gcov. The mcode backend creates less performant
 code but makes up for it with much faster compilation. It is therefore
 preferable for smaller projects without large or long running simulations.
 .
 Multiple backends can be installed at the same time and selected by either
 invoking the desired GHDL directly (as ghdl-gcc, ghdl-llvm or ghdl-mcode) or
 by providing a GHDL_BACKEND environment variable (containing gcc, llvm or
 mcode) while invoking ghdl.
 .
 This package is a dependency package that will make sure at least one backend
 is installed.

Package: ghdl-common
Description-md5: b290124fad2a6e7a33b72c9925247d56
Description-en: VHDL compiler/simulator (common files)
 GHDL is a compiler and simulator for VHDL, a Hardware Description Language.
 GHDL is not an interpreter: it allows you to analyse and elaborate sources to
 generate machine code from your design. Native program execution is the only
 way for high speed simulation.
 .
 This package contains common files for the GHDL compiler packages.

Package: ghdl-gcc
Description-md5: ec1284d70cac706d2656e20b43505771
Description-en: VHDL compiler/simulator (GCC backend)
 GHDL is a compiler and simulator for VHDL, a Hardware Description Language.
 GHDL is not an interpreter: it allows you to analyse and elaborate sources to
 generate machine code from your design. Native program execution is the only
 way for high speed simulation.
 .
 This package contains the compiler with the GCC backend.

Package: ghdl-llvm
Description-md5: d7156d37c756669e593cfa7d02043035
Description-en: VHDL compiler/simulator (LLVM backend)
 GHDL is a compiler and simulator for VHDL, a Hardware Description Language.
 GHDL is not an interpreter: it allows you to analyse and elaborate sources to
 generate machine code from your design. Native program execution is the only
 way for high speed simulation.
 .
 This package contains the compiler with the LLVM backend.

Package: ghdl-mcode
Description-md5: a43d648f2765b04ca5f3eada73656aac
Description-en: VHDL compiler/simulator (mcode backend)
 GHDL is a compiler and simulator for VHDL, a Hardware Description Language.
 GHDL is not an interpreter: it allows you to analyse and elaborate sources to
 generate machine code from your design. Native program execution is the only
 way for high speed simulation.
 .
 This package contains the compiler with the mcode backend.

Package: ghdl-tools
Description-md5: be3177ca14cf04b7594ec1f43e04a999
Description-en: VHDL compiler/simulator (tools)
 GHDL is a compiler and simulator for VHDL, a Hardware Description Language.
 GHDL is not an interpreter: it allows you to analyse and elaborate sources to
 generate machine code from your design. Native program execution is the only
 way for high speed simulation.
 .
 This package contains ghwdump, a simple command line tool to extract
 information from GHW files produced by GHDL and display it as text. It is
 mainly intended for use in debugging and is not needed for regular use of
 GHDL, where a wavefile visualization tool like gtkwave would normally be used.

Package: gir1.2-umockdev-1.0
Description-md5: fbb61fba8c934a3abb2dd226ec23d275
Description-en: introspection data for umockdev library
 umockdev mocks hardware devices for creating unit tests for libraries and
 programs that handle Linux hardware devices.
 .
 This package contains the introspection data for the libumockdev library.

Package: git-all
Description-md5: 7eb276543374432338c2d9bf7a76e9b6
Description-en: fast, scalable, distributed revision control system (all subpackages)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This is a dummy package which brings in all subpackages.

Package: git-cvs
Description-md5: 5c201c3115375a8b8f735f8e7775526c
Description-en: fast, scalable, distributed revision control system (cvs interoperability)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the git cvsimport, cvsexportcommit, and cvsserver
 tools, which allow Git to read from and write to CVS repositories and
 offer access over CVS protocol to Git repositories.
 .
 The git cvsimport tool can incrementally import from a repository that
 is being actively developed and only requires remote access over CVS
 protocol. Unfortunately, in many situations the import leads to
 incorrect results. For reliable, one-shot imports, cvs2git from the
 cvs2svn package or parsecvs may be a better fit.

Package: git-daemon-run
Description-md5: f22f55ff44557b91f4d1ad32ba7df1be
Description-en: fast, scalable, distributed revision control system (git-daemon service)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 git-daemon, as provided by the git package, is a simple server for git
 repositories, ideally suited for read-only updates, i.e. pulling from git
 repositories through the network.  This package provides a runit service
 for running git-daemon permanently.  This configuration is simpler and
 more reliable than git-daemon-sysvinit, at a cost of being less
 familiar for administrators accustomed to sysvinit.

Package: git-daemon-sysvinit
Description-md5: b9035bef841508be61c9ba878690987d
Description-en: fast, scalable, distributed revision control system (git-daemon service)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 git-daemon, as provided by the git package, is a simple server for git
 repositories, ideally suited for read-only updates, i.e. pulling from git
 repositories through the network.  This package provides a sysvinit service
 for running git-daemon permanently.  Unlike git-daemon-run, this
 package provides the usual sysvinit service management commands
 ("service git-daemon start/stop") for git-daemon.

Package: git-email
Description-md5: 5e0c38a8609078b06fbbe0e8e9e432b4
Description-en: fast, scalable, distributed revision control system (email add-on)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the git-send-email program for sending series of
 patch emails.

Package: git-gui
Description-md5: 699969d903b4df59976ab85a9e250838
Description-en: fast, scalable, distributed revision control system (GUI)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the git graphical user interface.
 .
 If aspell is installed, it can check the spelling of commit messages
 as the user types.
 .
 If meld is installed, it can be used for displaying diffs and for
 interactive merge conflict resolution.

Package: git-mediawiki
Description-md5: 68f824126adee99ee64bf2b96e49bb2c
Description-en: fast, scalable, distributed revision control system (MediaWiki remote helper)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the mediawiki remote helper, which allows Git to
 read from and write to a wiki such as Wikipedia as though it were a
 remote Git repository, and a 'git mw' command that can show a preview
 of how wiki markup will be rendered before pushing.

Package: git-svn
Description-md5: fe9279673cf6573640700aabf410ef25
Description-en: fast, scalable, distributed revision control system (svn interoperability)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides tools for interoperating with Subversion repositories,
 and importing SVN development history.

Package: gitk
Description-md5: 09d5ab78b8aa2f432bbf841a62bb9abc
Description-en: fast, scalable, distributed revision control system (revision tree visualizer)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the gitk program, a tcl/tk revision tree visualizer.

Package: gitweb
Description-md5: 2140d89702ec1cd621b41c71a95a910a
Description-en: fast, scalable, distributed revision control system (web interface)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package configures a web interface for browsing git repositories.
 .
 If apache2 is installed, the web interface is automatically made
 available at http://localhost/gitweb.  Other servers that support CGI
 or mod_perl are supported through manual configuration.
 .
 If libcgi-fast-perl is installed, gitweb can also be run over FastCGI
 (and served by nginx, for example).

Package: godot3
Description-md5: 5a40f4a9edf48a71ba606a6b0227510f
Description-en: Full 2D and 3D game engine with editor
 Godot is an advanced, feature packed, multi-platform 2D and 3D game engine.
 It provides a huge set of common tools, so you can just focus on making
 your game without reinventing the wheel.

Package: godot3-runner
Description-md5: d9d18459bce0a4f762b741363c7197ec
Description-en: Godot game engine run-time
 Godot is an advanced, feature packed, multi-platform 2D and 3D game engine.
 This package allows games to be run from source or data-pack.

Package: godot3-server
Description-md5: 8a2937b4a6ae779fde8668cff2e47c45
Description-en: Headless Godot game engine run-time
 Godot is an advanced, feature packed, multi-platform 2D and 3D game engine.
 This package provides a command-line only version of the program.

Package: gogottrpc
Description-md5: 5fb0782f7a7f6b0c43215d1dc436e4f9
Description-en: GRPC for low-memory environments - utilities
 The existing grpc-go project requires a lot of memory overhead for
 importing packages and at runtime. While this is great for many services
 with low density requirements, this can be a problem when running a
 large number of services on a single machine or on a machine with a
 small amount of memory.
 .
 Using the same GRPC definitions, this project reduces the binary size
 and protocol overhead required. We do this by eliding the net/http,
 net/http2 and grpc package used by grpc replacing it with a lightweight
 framing protocol. The result are smaller binaries that use less resident
 memory with the same ease of use as GRPC.
 .
 Please note that while this project supports generating either end of
 the protocol, the generated service definitions will be incompatible
 with regular GRPC services, as they do not speak the same protocol.
 .
 This package provides utilities.

Package: golang-github-cloudflare-gortr-dev
Description-md5: b40997f95ad7f4071988893b8f996ac8
Description-en: Cloudflare's RPKI to router library
 GoRTR is an implementation of the RPKI to router protocol (RFC 6810).

Package: golang-github-containerd-fifo-dev
Description-md5: af96bd7b7dbf644db9284a2deb7499df
Description-en: fifo pkg for Go
 Go package for handling fifos in a sane way.

Package: golang-github-containerd-ttrpc-dev
Description-md5: 21323f9c4b8163ddbaa6c2f1db8826cc
Description-en: GRPC for low-memory environments
 The existing grpc-go project requires a lot of memory overhead for
 importing packages and at runtime. While this is great for many services
 with low density requirements, this can be a problem when running a
 large number of services on a single machine or on a machine with a
 small amount of memory.
 .
 Using the same GRPC definitions, this project reduces the binary size
 and protocol overhead required. We do this by eliding the net/http,
 net/http2 and grpc package used by grpc replacing it with a lightweight
 framing protocol. The result are smaller binaries that use less resident
 memory with the same ease of use as GRPC.
 .
 Please note that while this project supports generating either end of
 the protocol, the generated service definitions will be incompatible
 with regular GRPC services, as they do not speak the same protocol.
 .
 This package provides sources.

Package: golang-github-containers-image
Description-md5: 6994e26bbc30bef93f022bca529c3c0e
Description-en: Configuration files and manpages for github.com/containers repositories
 This package contains documentation and configuration files for use by
 other container projects.

Package: golang-github-containers-image-dev
Description-md5: 43d69f69cfd668e8d0515620d3600bea
Description-en: golang library to work with containers' images
 This library aims at working in various way with containers' images and
 container image registries and allows an application to pull and push
 images from container image registries, like the upstream docker
 registry. It also implements "simple image signing".

Package: golang-github-felixge-httpsnoop-dev
Description-md5: 86a86d9b33d1b3eba541b39bb229111b
Description-en: capture http related metrics from http.Handlers (library)
 Httpsnoop provides an easy way to capture http related metrics (i.e. response
 time, bytes written, and http status code) from your application's
 http.Handlers.
 .
 Doing this requires non-trivial wrapping of the http.ResponseWriter interface,
 which is also exposed for users interested in a more low-level API.

Package: golang-github-opencontainers-image-spec-dev
Description-md5: b839d58a6d79f6f38cc998da885dc1b3
Description-en: Open Container Initiative (OCI) Image Format Specification
 The OCI Image Format project creates and maintains the software shipping
 container image format spec (OCI Image Format). The goal of this
 specification is to enable the creation of interoperable tools for
 building, transporting, and preparing a container image to run.

Package: golang-github-pion-datachannel-dev
Description-md5: df65f985cc54658aa21b33398163aec1
Description-en: Go implementation of WebRTC Data Channels
 Golang library implementing WebRTC Data Channels. WebRTC data channel
 lets you send text or binary data over an active connection to a peer

Package: golang-github-pion-dtls.v2-dev
Description-md5: 9d12b37d1e6dd0527054d5cc9084f8c9
Description-en: DTLS 1.2 Server/Client implementation for Go
 Native DTLS 1.2vimplementation in the Go programming language.
 .
 This is currently targeting DTLS 1.2, and the most modern/common cipher
 suites. Current features are:
 .
  * DTLS 1.2 Client/Server
  * Key Exchange via ECDHE(curve25519, nistp256, nistp384) and PSK
  * Packet loss and re-ordering is handled during handshaking
  * Key export (RFC 5705 (https://tools.ietf.org/html/rfc5705))
  * Serialization and Resumption of sessions
  * Extended Master Secret extension (RFC 7627)
  * ALPN extension (RFC 7301)

Package: golang-github-pion-ice.v2-dev
Description-md5: 9c2f76b993249b868fe7a7e145fb7156
Description-en: Go implementation of ICE (library)
 Golang library implementing ICE for WebRTC
 Interactive Connectivity Establishment (ICE) is a framework to
 allow user's web browser to connect with peers.
 ICE uses STUN and/or TURN servers to accomplish this.

Package: golang-github-pion-interceptor-dev
Description-md5: 3c62c698dbf66607313b7ee6bf4f9349
Description-en: Pluggable RTP/RTCP processors for building real time communication
 Interceptor is a framework for building RTP/RTCP communication software.
 This framework defines a interface that each interceptor must satisfy.
 These interceptors are then run sequentially. It also provides
 common interceptors that will be useful for building RTC software.
 .
 This package was built for pion/webrtc but is consumable by anyone.

Package: golang-github-pion-mdns-dev
Description-md5: b8137e717c3854e4e01a48f55cc30969
Description-en: Pure Go implementation of Multicast DNS (library)
 Golang mDNS implementation.
 The original user is Pion WebRTC, but is extendable for
 other uses.

Package: golang-github-pion-rtcp-dev
Description-md5: 4f906a636a90ceebfb5d12031856891b
Description-en: Go implementation of RTCP (library)
 Golang implementation of RTP Control Protocol (RTCP)
 .
 RTCP is defined in IETF RFC 3550. It is used alongside RTP. RTCP offers
 a lightweight control mechanism for RTP that can be used to send
 statistic reports and flow control messages.

Package: golang-github-pion-sctp-dev
Description-md5: d26109a45cc50f465d08b2063aebb980
Description-en: Go implementation of SCTP
 Golang based implementation of Stream Control Transmission Protocol
 .
 SCTP (Stream Control Transmission Protocol) is an IETF standard
 for a transport protocol which enables the reliable, in-order
 transmission of messages while offering congestion control, multi-
 homing, and other features to improve reliability and stability of the
 connection. It's used for sending traditional telephone calls over the
 Internet, but is also used for WebRTC data.

Package: golang-github-pion-srtp.v2-dev
Description-md5: 1adadaeaab50981eec7b30704eef8b39
Description-en: Go implementation of SRTP (library)
 Library implementing Secure Real-time Transport Protocol (SRTP) in Golang.
 SRTP is used by WebRTC for encrypting media streams being a lighter
 weight option than DTLS.

Package: golang-github-pion-stun-dev
Description-md5: 869fa44f9749a492f2e356b19e8b241a
Description-en: Go implementation of STUN
 The library is used as a part pion WebRTC implementation.
  Package stun implements Session Traversal Utilities for NAT (STUN)
 [RFC5389] protocol and client with no external
 dependencies and zero allocations in hot paths.
 Client supports automatic requests and retransmissions.

Package: golang-github-pion-transport-dev
Description-md5: 826b5cca4291d6fb3444c52f4d6dacaf
Description-en: Transport testing for Pion
 Provides multiple plugins for pion/webrtc
 like a VPN layer, eplaydetector providing
 packet replay detection algorithm etc.

Package: golang-github-pion-turn.v2-dev
Description-md5: 061c0d076b777d3b61775abd4f2fbbed
Description-en: Pion TURN, an API for building TURN clients and servers (library)
 Pion TURN is a Go toolkit for building TURN servers and clients.
 pion/turn is an API for building STUN/TURN clients and servers, not a
 binary to deploy and then configure. It may require copying package examples
 and making minor modifications to fit the need, no knowledge of Go is
 required however.

Package: golang-github-pion-udp-dev
Description-md5: 04355b5deae292a1bee6f8a269978c20
Description-en: connection-oriented listener over a UDP PacketConn
 This package is used in the pion/DTLS and pion/SCTP
 transport to provide a connection-oriented
 listener over a UDP.

Package: golang-github-pion-webrtc.v3-dev
Description-md5: 1dd7dc9e38cc1998c408b2e9ade64399
Description-en: Pure Go implementation of the WebRTC API (library)
 This package implements WebRTC API in Golang. WebRTC is a free and open-
 source project providing web browsers and mobile applications with real-
 time communication via application programming interfaces.

Package: golang-github-tdewolff-minify-dev
Description-md5: 49df17697202f69ed4f3fbb02089d085
Description-en: Go minifiers for web formats
 github.com/tdewolff/minify is a minifier package written in Go.
 It provides HTML5, CSS3, JS, JSON, SVG and XML minifiers and an interface
 to implement any other minifier.
 .
 Minification is the process of removing bytes from a file (such as
 whitespace) without changing its output and therefore shrinking
 its size and speeding up transmission over the Internet and possibly
 parsing.  The implemented minifiers are high performance and streaming,
 which implies O(n).
 .
 The core functionality associates mimetypes with minification functions,
 allowing embedded resources (like CSS or JS within HTML files) to be
 minified as well. Users can add new implementations that are triggered
 based on a mimetype (or pattern), or redirect to an external command
 (like ClosureCompiler, UglifyCSS, ...)

Package: golang-github-tdewolff-parse-dev
Description-md5: f231d8026767e8a24c5c5254875f593b
Description-en: Go parsers for web formats
 This package contains several lexers and parsers written in Go.
 All subpackages are built to be streaming, high performance
 and to be in accordance with the official (latest) specifications.
 .
 The lexers are implemented using buffer.Lexer in
 https://github.com/tdewolff/parse/buffer and the parsers work on top of
 the lexers. Some subpackages have hashes defined (using Hasher
 https://github.com/tdewolff/hasher) that speed up common
 byte-slice comparisons.

Package: golang-snowflake-dev
Description-md5: a98b4349bcc0f193bb463645a36286cd
Description-en: WebRTC pluggable transport for Tor (library)
 Snowflake helps users circumvent censorship by making a WebRTC
 connection to volunteer proxies. These proxies relay Tor traffic to a
 Snowflake bridge and then to through the Tor network.
 .
 This package provides golang library sources.

Package: graide
Description-md5: e5eba29b2f7bc4773aea2605547e7d95
Description-en: IDE for Graphite GDL font description development
 Graide is an IDE including a debugger that helps people develop
 Graphite GDL descriptions for smart fonts and compile them into fonts.
 .
 Graphite is a "smart font" system developed specifically to handle the
 complexities of lesser-known languages of the world.

Package: hunspell
Description-md5: 0cb13f3fed802d47e7c5bf5a7e7a6f5b
Description-en: spell checker and morphological analyzer (program)
 Hunspell is a spell checker and morphological analyzer library and program
 designed for languages with rich morphology and complex word compounding or
 character encoding. It is based on MySpell and features an Ispell-like
 terminal interface using Curses library, an Ispell pipe interface and an
 OpenOffice.org UNO module.
 .
 Main features:
  - Unicode support (first 65535 Unicode characters)
  - morphological analysis (in custom item and arrangement style)
  - Max. 65535 affix classes and twofold affix stripping (for agglutinative
    languages, like Azeri, Basque, Estonian, Finnish, Hungarian, Turkish, etc.)
  - Support complex compoundings (for example, Hungarian and German)
  - Support language specific algorithms (for example, handling Azeri
    and Turkish dotted i, or German sharp s)
  - Handling conditional affixes, circumfixes, fogemorphemes,
    forbidden words, pseudoroots and homonyms.
 .
 This package contains the program with the Ispell-like terminal and pipe
 interfaces.

Package: iceoryx
Description-md5: 011db86f440400100c9000c37588e363
Description-en: zero-copy inter-process communication
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the central RouDi daemon and the introspection
 tool for Iceoryx.

Package: iceoryx-doc
Description-md5: 3ede20f09621f57adbff473776201d74
Description-en: zero-copy inter-process communication library documentation
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the API documentation for all Iceoryx components.

Package: idle-python3.11
Description-md5: 57a60fed811a55649354f3eb48ae78ff
Description-en: IDE for Python (v3.11) using Tkinter
 IDLE is an Integrated Development Environment for Python (v3.11).
 IDLE is written using Tkinter and therefore quite platform-independent.

Package: ironic-python-agent
Description-md5: 0a3f62f99ca1ec0dadaaa0dd7a0e7c69
Description-en: bare metal hypervisor API for OpenStack - Python Agent
 Ironic provision bare metal machines instead of virtual machines. It is a fork
 of the Nova Baremetal driver. It is best thought of as a bare metal hypervisor
 API and a set of plugins which interact with the bare metal hypervisors. By
 default, it will use PXE and IPMI in concert to provision and turn on/off
 machines, but Ironic also supports vendor-specific plugins which may implement
 additional functionality.
 .
 This package provides the Python agent, to be deployed on the discovery image
 or ramdisk.

Package: jest
Description-md5: a07da493155d5af2e96f27b19e5d30c3
Description-en: Delightful JavaScript Testing
 Some features of this testing framework are:
  * Easy Setup: Jest is a complete and easy to set up JavaScript testing
  solution. In fact, Jest works out of the box for any React project.
  * Instant Feedback: Failed tests run first. Fast interactive mode can switch
  between running all tests or only test files related to changed files.
  * Snapshot Testing: Jest can capture snapshots of React trees or other
  serializable values to simplify UI testing.
 .
 Node.js is an event-based server-side JavaScript engine.

Package: jruby
Description-md5: b966216a2f0f9bd9e3cd74e7c9fe80af
Description-en: 100% pure-Java implementation of Ruby
 JRuby is an implementation of the ruby language using the JVM.
 .
 It aims to be a complete, correct and fast implementation of Ruby, at the
 same time as providing powerful new features such as concurrency without a
 global interpreter lock, true parallelism and tight integration to the Java
 language to allow one to use Java classes in Ruby programs and to allow
 JRuby to be embedded into a Java application.
 .
 JRuby can be used as a faster version of Ruby, it can be used to run Ruby
 on the JVM and access powerful JVM libraries such as highly tuned concurrency
 primitives, it can also be used to embed Ruby as a scripting language in your
 Java program, or many other possibilities.

Package: libawl-php
Description-md5: 0db782f0eb6e87473cb571227ce4add7
Description-en: Andrew's Web Libraries - PHP Utility Libraries
 This package contains Andrew's Web Libraries.  This is a set
 of hopefully lightweight libraries for handling a variety of
 useful things for web programming, including:
  - Session management
  - User management
  - DB Records
  - Simple reporting
  - DB Schema Updating
  - iCalendar parsing
 .
 There is some documentation in the awl-doc package.

Package: libbdd-dev
Description-md5: caaa42509b2e5eb065636f9cd6cf753a
Description-en: Binary decision-diagram library (development)
 Binary decision diagrams (BDDs) are space-efficient encodings of
 boolean expressions or dynamic truth tables, used in eg. model
 checking.  BuDDy is an efficient BDD library with all the standard
 BDD operations, dynamic reordering of variables, automated garbage
 collection, a C++ interface with automatic reference counting, and
 more.
 .
 libbdd-dev is the BuDDy development package containing a static
 library and the include files needed for building applications using
 BuDDy.

Package: libbdd0c2
Description-md5: b3e8960dec071b06cd523391a20941ac
Description-en: Binary decision-diagram library (runtime)
 Binary decision diagrams (BDDs) are space-efficient encodings of
 boolean expressions or dynamic truth tables, used in eg. model
 checking.  This is the runtime package for programs that use the
 BuDDy library.

Package: libbolt-16-dev
Description-md5: a5816535f62942b4fcded9b86fb66840
Description-en: Post-link optimizer
 It achieves the improvements by optimizing application's code layout based on
 execution profile gathered by sampling profiler.

Package: libbrial-dev
Description-md5: c2626fcf7fcb606f5ba4966ffc1b51a2
Description-en: polynomials over Boolean Rings, core development files
 The core of BRiAl is a C++ library, which provides high-level data
 types for Boolean polynomials and monomials, exponent vectors, as
 well as for the underlying polynomial rings and subsets of the
 powerset of the Boolean variables. As a unique approach, binary
 decision diagrams are used as internal storage type for polynomial
 structures. On top of this C++-library a Python interface
 is provided. This allows parsing of complex polynomial systems, as well
 as sophisticated and extendable strategies for Groebner base
 computation. BRiAl features a powerful reference implementation
 for Groebner basis computation.
 .
 This package contains the BRiAl core development files.

Package: libbrial-groebner-dev
Description-md5: 06b76f7f1667b2f0b3f088ab64c02c58
Description-en: development files for libbrial-groebner
 The core of BRiAl is a C++ library, which provides high-level data
 types for Boolean polynomials and monomials, exponent vectors, as
 well as for the underlying polynomial rings and subsets of the
 powerset of the Boolean variables. As a unique approach, binary
 decision diagrams are used as internal storage type for polynomial
 structures. On top of this C++-library a Python interface
 is provided. This allows parsing of complex polynomial systems, as well
 as sophisticated and extendable strategies for Groebner base
 computation. BRiAl features a powerful reference implementation
 for Groebner basis computation.
 .
 This package contains the development files for libbrial-groebner.

Package: libbrial-groebner3
Description-md5: c85b9b23bc19cfbcd1c4f6095e22ba7e
Description-en: computer algebra routines of BRiAl
 The core of BRiAl is a C++ library, which provides high-level data
 types for Boolean polynomials and monomials, exponent vectors, as
 well as for the underlying polynomial rings and subsets of the
 powerset of the Boolean variables. As a unique approach, binary
 decision diagrams are used as internal storage type for polynomial
 structures. On top of this C++-library a Python interface
 is provided. This allows parsing of complex polynomial systems, as well
 as sophisticated and extendable strategies for Groebner base
 computation. BRiAl features a powerful reference implementation
 for Groebner basis computation.
 .
 This package contains the BRiAl shared library libbrial_groebner.

Package: libbrial3
Description-md5: 25d1c5e76291f633e89aa1da852af7cd
Description-en: polynomials over Boolean Rings, shared library
 The core of BRiAl is a C++ library, which provides high-level data
 types for Boolean polynomials and monomials, exponent vectors, as
 well as for the underlying polynomial rings and subsets of the
 powerset of the Boolean variables. As a unique approach, binary
 decision diagrams are used as internal storage type for polynomial
 structures. On top of this C++-library a Python interface
 is provided. This allows parsing of complex polynomial systems, as well
 as sophisticated and extendable strategies for Groebner base
 computation. BRiAl features a powerful reference implementation
 for Groebner basis computation.
 .
 This package contains the BRiAl shared library libbrial.

Package: libc++-15-dev
Description-md5: 8cd44d2ae4969ab1c95a30917ddc69e7
Description-en: LLVM C++ Standard library (development files)
 libc++ is another implementation of the C++ standard library
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Fast execution.
   * Minimal memory use.
   * Fast compile times.
   * ABI compatibility with gcc's libstdc++ for some low-level features such
     as exception objects, rtti and memory allocation.
   * Extensive unit tests.

Package: libc++-15-dev-wasm32
Description-md5: 21e20e19acf2a499a9e194408e3990d7
Description-en: LLVM C++ Standard library (WASI)
 libc++ is another implementation of the C++ standard library
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Fast execution.
   * Minimal memory use.
   * Fast compile times.
   * ABI compatibility with gcc's libstdc++ for some low-level features such
     as exception objects, rtti and memory allocation.
   * Extensive unit tests.
 .
 This package provides a version for the 32-bit WebAssembly System Interface.

Package: libc++-16-dev
Description-md5: 8cd44d2ae4969ab1c95a30917ddc69e7
Description-en: LLVM C++ Standard library (development files)
 libc++ is another implementation of the C++ standard library
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Fast execution.
   * Minimal memory use.
   * Fast compile times.
   * ABI compatibility with gcc's libstdc++ for some low-level features such
     as exception objects, rtti and memory allocation.
   * Extensive unit tests.

Package: libc++-16-dev-wasm32
Description-md5: 21e20e19acf2a499a9e194408e3990d7
Description-en: LLVM C++ Standard library (WASI)
 libc++ is another implementation of the C++ standard library
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Fast execution.
   * Minimal memory use.
   * Fast compile times.
   * ABI compatibility with gcc's libstdc++ for some low-level features such
     as exception objects, rtti and memory allocation.
   * Extensive unit tests.
 .
 This package provides a version for the 32-bit WebAssembly System Interface.

Package: libc++1-15
Description-md5: 3e11b80d657dd5ed05ee027e3cba65ca
Description-en: LLVM C++ Standard library
 libc++ is another implementation of the C++ standard library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Fast execution.
   * Minimal memory use.
   * Fast compile times.
   * ABI compatibility with gcc's libstdc++ for some low-level features such
     as exception objects, rtti and memory allocation.
   * Extensive unit tests.

Package: libc++1-16
Description-md5: 3e11b80d657dd5ed05ee027e3cba65ca
Description-en: LLVM C++ Standard library
 libc++ is another implementation of the C++ standard library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Fast execution.
   * Minimal memory use.
   * Fast compile times.
   * ABI compatibility with gcc's libstdc++ for some low-level features such
     as exception objects, rtti and memory allocation.
   * Extensive unit tests.

Package: libc++abi-15-dev
Description-md5: 364169ef5dcd81ea07cbcba49d061676
Description-en: LLVM low level support for a standard C++ library (development files)
 libc++abi is another implementation of low level support for a standard C++
 library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Provide a portable sublayer to ease the porting of libc++

Package: libc++abi-15-dev-wasm32
Description-md5: 9a34398f2ed6518894f52de69f57d517
Description-en: LLVM low level support for a standard C++ library (WASI)
 libc++abi is another implementation of low level support for a standard C++
 library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Provide a portable sublayer to ease the porting of libc++
 .
 This package provides a version for the 32-bit WebAssembly System Interface.

Package: libc++abi-16-dev
Description-md5: 364169ef5dcd81ea07cbcba49d061676
Description-en: LLVM low level support for a standard C++ library (development files)
 libc++abi is another implementation of low level support for a standard C++
 library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Provide a portable sublayer to ease the porting of libc++

Package: libc++abi-16-dev-wasm32
Description-md5: 9a34398f2ed6518894f52de69f57d517
Description-en: LLVM low level support for a standard C++ library (WASI)
 libc++abi is another implementation of low level support for a standard C++
 library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Provide a portable sublayer to ease the porting of libc++
 .
 This package provides a version for the 32-bit WebAssembly System Interface.

Package: libc++abi1-15
Description-md5: 6a197f8a8ae8385e801b369ea97886ce
Description-en: LLVM low level support for a standard C++ library
 libc++abi is another implementation of low level support for a standard C++
 library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Provide a portable sublayer to ease the porting of libc++

Package: libc++abi1-16
Description-md5: 6a197f8a8ae8385e801b369ea97886ce
Description-en: LLVM low level support for a standard C++ library
 libc++abi is another implementation of low level support for a standard C++
 library.
 .
 Features and Goals
 .
   * Correctness as defined by the C++ standards.
   * Provide a portable sublayer to ease the porting of libc++

Package: libcereal-dev
Description-md5: 870052292bc33e72d293f66d84e3df21
Description-en: C++11 library for serialization
 cereal is a header-only C++11 serialization library. cereal takes arbitrary
 data types and reversibly turns them into different representations, such as
 compact binary encodings, XML, or JSON. cereal was designed to be fast,
 light-weight, and easy to extend - it has no external dependencies and can be
 easily bundled with other code or used standalone.

Package: libcereal-doc
Description-md5: cf6b5fcedc6b95481089864c771a7ff8
Description-en: C++11 library for serialization HTML documentation
 cereal is a header-only C++11 serialization library. cereal takes arbitrary
 data types and reversibly turns them into different representations, such as
 compact binary encodings, XML, or JSON. cereal was designed to be fast,
 light-weight, and easy to extend - it has no external dependencies and can be
 easily bundled with other code or used standalone.
 .
 This package contains the HTML documentation.

Package: libcgreen1
Description-md5: fcc1e6439263733e341ef88757ab076f
Description-en: Cgreen Library - Unit tests and mocking framework for C and C++
 A modern unit test and mocking framework for C and C++. Cgreen features
    - fast build, clean code, highly portable
    - simple auto-discovery of tests
    - fluent, expressive and readable API
    - each test runs in isolation to prevent cross-test dependencies
    - built-in mocking for C, compatible other C++ mocking librarie
 Provides the Unittest library

Package: libcgreen1-dev
Description-md5: c372e3c9ca96dad755d795905c4b976a
Description-en: Cgreen library - development files
 A modern unit test and mocking framework for C and C++. Cgreen features
    - fast build, clean code, highly portable
    - simple auto-discovery of tests
    - fluent, expressive and readable API
    - each test runs in isolation to prevent cross-test dependencies
    - built-in mocking for C, compatible other C++ mocking libraries

Package: libcgreen1-doc
Description-md5: 15be41e4cd14b9f31c5b52a1eba4db03
Description-en: Cgreen Library - document
 A modern unit test and mocking framework for C and C++. Cgreen features
    - fast build, clean code, highly portable
    - simple auto-discovery of tests
    - fluent, expressive and readable API
    - each test runs in isolation to prevent cross-test dependencies
    - built-in mocking for C, compatible other C++ mocking librarie
 Provides the Unittest library document

Package: libclang-15-dev
Description-md5: e36d08060140464d291042b94e0b1096
Description-en: Clang library - Development package
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang headers to develop extensions over
 libclang1-15.

Package: libclang-16-dev
Description-md5: fd87f4b955aacfb98d5a260d532303ea
Description-en: Clang library - Development package
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang headers to develop extensions over
 libclang1-16.

Package: libclang-common-15-dev
Description-md5: c70051d53e23270c29353f55183e81aa
Description-en: Clang library - Common development package
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang generic headers.

Package: libclang-common-16-dev
Description-md5: c70051d53e23270c29353f55183e81aa
Description-en: Clang library - Common development package
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang generic headers.

Package: libclang-cpp15
Description-md5: 8acc7c5b41666c14f1ef5e79310225e6
Description-en: C++ interface to the Clang library
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang C++ library.
 .
 The C++ Interface to Clang provides an API that exposes
 facilities for parsing source code into an abstract syntax tree (AST),
 loading already-parsed ASTs, traversing the AST, associating physical source
 locations with elements within the AST, and other facilities that support
 Clang-based development tools.

Package: libclang-cpp15-dev
Description-md5: f5afea2f6b71ba0705e995aaab21eef9
Description-en: C++ interface to the Clang library
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang C++ library.
 .
 The C++ Interface to Clang provides an API that exposes
 facilities for parsing source code into an abstract syntax tree (AST),
 loading already-parsed ASTs, traversing the AST, associating physical source
 locations with elements within the AST, and other facilities that support
 Clang-based development tools.
 .
 This package contains symlinks without a version number, which needed by
 linker at build time.

Package: libclang-cpp16
Description-md5: 8acc7c5b41666c14f1ef5e79310225e6
Description-en: C++ interface to the Clang library
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang C++ library.
 .
 The C++ Interface to Clang provides an API that exposes
 facilities for parsing source code into an abstract syntax tree (AST),
 loading already-parsed ASTs, traversing the AST, associating physical source
 locations with elements within the AST, and other facilities that support
 Clang-based development tools.

Package: libclang-cpp16-dev
Description-md5: f5afea2f6b71ba0705e995aaab21eef9
Description-en: C++ interface to the Clang library
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang C++ library.
 .
 The C++ Interface to Clang provides an API that exposes
 facilities for parsing source code into an abstract syntax tree (AST),
 loading already-parsed ASTs, traversing the AST, associating physical source
 locations with elements within the AST, and other facilities that support
 Clang-based development tools.
 .
 This package contains symlinks without a version number, which needed by
 linker at build time.

Package: libclang-rt-15-dev
Description-md5: 2aaff3e893bfd063ceaf38e310dc3055
Description-en: Compiler-rt - development package
 This package provides various libraries:
 .
   * builtins - Simple libraries that provide implementation of the
     low-level target-specific hooks required by code generation
     and other runtime components.
   * sanitizer runtimes - AddressSanitizer, ThreadSanitizer,
     UndefinedBehaviorSanitizer, MemorySanitizer, LeakSanitizer
     DataFlowSanitizer, etc
   * profile - Library which is used to collect coverage information.

Package: libclang-rt-15-dev-wasm32
Description-md5: 0a3a8bf20b284a6b0fb9f63d5541c217
Description-en: Compiler-rt - wasm32 builtins
 Provides the compiler-rt builtins for WebAssembly 32 bits

Package: libclang-rt-15-dev-wasm64
Description-md5: f6fba666aadae95050bf103b52358363
Description-en: Compiler-rt - wasm64 builtins
 Provides the compiler-rt builtins for WebAssembly 64 bits

Package: libclang-rt-16-dev
Description-md5: 2aaff3e893bfd063ceaf38e310dc3055
Description-en: Compiler-rt - development package
 This package provides various libraries:
 .
   * builtins - Simple libraries that provide implementation of the
     low-level target-specific hooks required by code generation
     and other runtime components.
   * sanitizer runtimes - AddressSanitizer, ThreadSanitizer,
     UndefinedBehaviorSanitizer, MemorySanitizer, LeakSanitizer
     DataFlowSanitizer, etc
   * profile - Library which is used to collect coverage information.

Package: libclang-rt-16-dev-wasm32
Description-md5: 0a3a8bf20b284a6b0fb9f63d5541c217
Description-en: Compiler-rt - wasm32 builtins
 Provides the compiler-rt builtins for WebAssembly 32 bits

Package: libclang-rt-16-dev-wasm64
Description-md5: f6fba666aadae95050bf103b52358363
Description-en: Compiler-rt - wasm64 builtins
 Provides the compiler-rt builtins for WebAssembly 64 bits

Package: libclang1-15
Description-md5: 6fbabc5fd121a4ff6b254de59627b6de
Description-en: C interface to the Clang library
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang library.
 .
 The C Interface to Clang provides a relatively small API that exposes
 facilities for parsing source code into an abstract syntax tree (AST),
 loading already-parsed ASTs, traversing the AST, associating physical source
 locations with elements within the AST, and other facilities that support
 Clang-based development tools.

Package: libclang1-16
Description-md5: 6fbabc5fd121a4ff6b254de59627b6de
Description-en: C interface to the Clang library
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang library.
 .
 The C Interface to Clang provides a relatively small API that exposes
 facilities for parsing source code into an abstract syntax tree (AST),
 loading already-parsed ASTs, traversing the AST, associating physical source
 locations with elements within the AST, and other facilities that support
 Clang-based development tools.

Package: libclc-15
Description-md5: 73bf1c1e61845108c59b363de4fd901a
Description-en: OpenCL C language implementation - platform support
 libclc is an open implementation of the OpenCL C programming language,
 as specified by the OpenCL 1.1 Specification.
 .
 This package contains support for the amdgcn (AMD GPU), PTX and r600
 platforms.

Package: libclc-16
Description-md5: 73bf1c1e61845108c59b363de4fd901a
Description-en: OpenCL C language implementation - platform support
 libclc is an open implementation of the OpenCL C programming language,
 as specified by the OpenCL 1.1 Specification.
 .
 This package contains support for the amdgcn (AMD GPU), PTX and r600
 platforms.

Package: libclc-16-dev
Description-md5: af42cc63b204a8c47b782398389a6170
Description-en: OpenCL C language implementation - development files
 libclc is an open implementation of the OpenCL C programming language,
 as specified by the OpenCL 1.1 Specification.
 .
 This package contains development header files.

Package: libcommons-dbcp-java
Description-md5: f2f7170da4a16dd656c8f4ad419adda9
Description-en: Database Connection Pooling Services
 The DBCP package provides database connection pooling services. The
 following features are supported
 .
  * DataSource and Driver interfaces to the pool.
  * Support for arbitrary sources of the underlying Connections.
  * Integration with arbitrary org.apache.commons.pool.ObjectPool
    implementations.
  * Support for Connection validation, expiration, etc.
  * Support for PreparedStatement pooling.
  * XML configuration.
 .
 This is a part of the Apache Commons Project.

Package: libcurl3-nss
Description-md5: 459d2b4fbb16cf9975276e1d24a7ffe8
Description-en: easy-to-use client-side URL transfer library (NSS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by NSS.

Package: libcurl4-nss-dev
Description-md5: b83e9196a054062dc76fc2a693802052
Description-en: development files and documentation for libcurl (NSS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by NSS.

Package: libebackend1.2-dev
Description-md5: a5d72b476981a785a5ae2459f4a20808
Description-en: Utility library for evolution data servers (development files)
 This package contains header files and static library for libebackend.
 .
 libebackend is a utility library for evolution-data-server providing
 backend function to access data.
 .
 Evolution is the integrated mail, calendar, task and address book
 distributed suite from Novell, Inc.

Package: libebook-contacts1.2-dev
Description-md5: db02360a3dd32c2d99c43b5ea29a380d
Description-en: Client library for evolution contacts books (development files)
 This package contains header files and static library for libebook.
 .
 libebook is a client library for evolution addressbooks.
 Evolution is the integrated mail, calendar, task and address book
 distributed suite from Novell, Inc.

Package: libebook1.2-dev
Description-md5: ef3ee2f270bec1dd37ca08ab22a90311
Description-en: Client library for evolution address books (development files)
 This package contains header files and static library for libebook.
 .
 libebook is a client library for evolution addressbooks.
 Evolution is the integrated mail, calendar, task and address book
 distributed suite from Novell, Inc.

Package: libecal2.0-dev
Description-md5: 64e78a627bc19180d08e2006a3590372
Description-en: Client library for evolution calendars (development files)
 Evolution is the integrated mail, calendar, task and address book
 distributed suite from Novell, Inc.
 .
 This package contains header files and static library for libecal.

Package: libedata-book1.2-dev
Description-md5: daf7a85467bbdfac33345b2709b9f36d
Description-en: Backend library for evolution address books (development files)
 Evolution is the integrated mail, calendar, task and address book
 distributed suite from Novell, Inc.
 .
 This package contains header files and static library for libedata-book.

Package: libedata-cal2.0-dev
Description-md5: e696a09b21241ebcdcff5dd7e60f1c19
Description-en: Backend library for evolution calendars (development files)
 Evolution is the integrated mail, calendar, task and address book
 distributed suite from Novell, Inc.
 .
 This package contains header files and static library for libedata-cal.

Package: libedataserver1.2-dev
Description-md5: f544598afd99e88bcd01bf63f94d1b5b
Description-en: Utility library for evolution data servers (development files)
 The data server, called "Evolution Data Server" is responsible for managing
 calendar and addressbook information.
 .
 This package contains header files and static library for libedataserver.

Package: libedataserverui1.2-dev
Description-md5: ae4ddfcad376c4c2a572e9be547c5f7e
Description-en: Utility library for evolution data servers (development files)
 The data server, called "Evolution Data Server" is responsible for managing
 calendar and addressbook information.
 .
 This package contains development files for libedataserverui.

Package: libedataserverui4-dev
Description-md5: 8c71e2731193fae8e3d77facdf63d043
Description-en: GTK4 Utility library for evolution data server (development files)
 The data server, called "Evolution Data Server" is responsible for managing
 calendar and addressbook information.
 .
 This package contains development files for libedataserverui.

Package: libegl1-mesa
Description-md5: 635a93bcd1440d16621693fe064c2aa9
Description-en: transitional dummy package
 This is a transitional dummy package, it can be safely removed.

Package: libetonyek-tools
Description-md5: 46f6ca91212eca38774f9c48f0b72f29
Description-en: library for reading and converting Apple Keynote presentations -- tools
 libetonyek is a library and a set of tools for reading and converting
 Apple Keynote presentations. The library tries to extract the most
 important parts of version 2 format of Keynote (version 1 is not
 supported yet, but it should be in the future).
 .
 This package contains key2text, key2raw and key2xhtml for "converting"
 Keynote presentations in  those respective formats.

Package: libflang-16-dev
Description-md5: 3328d45b650afee35fe8b6da0b9b1e49
Description-en: Flang library - Development package
 Ground-up implementation of a Fortran front end written in
 modern C++.
 .
 While it is capable of generating executables for a number
 of examples, some functionalities are still missing.
 .
 This package contains the flang libraries and headers.

Package: libfluidsynth-dev
Description-md5: de826b558da2db2978953232479abd0f
Description-en: Real-time MIDI software synthesizer (development files)
 Fluidsynth is a real-time midi synthesizer based on the soundfont (sf2 and sf3)
 specifications. It can be used to render MIDI input or MIDI files to audio.
 The MIDI events are read from a MIDI device. The sound is rendered in
 real-time to the sound output device.
 .
 This package contains the development files.

Package: libfluidsynth3
Description-md5: 14e0cd0618b8e41b072bf1535bde2e64
Description-en: Real-time MIDI software synthesizer (runtime library)
 Fluidsynth is a real-time midi synthesizer based on the soundfont (sf2 and sf3)
 specifications. It can be used to render MIDI input or MIDI files to audio.
 The MIDI events are read from a MIDI device. The sound is rendered in
 real-time to the sound output device.
 .
 This package contains the runtime library.

Package: libfuzzer-15-dev
Description-md5: bc55cd127b8dab148b78e61e5e475b8e
Description-en: Library for coverage-guided fuzz testing
 LibFuzzer is a library for in-process, coverage-guided, evolutionary fuzzing
 of other libraries.
 .
 LibFuzzer is similar in concept to American Fuzzy Lop (AFL), but it performs
 all of its fuzzing inside a single process. This in-process fuzzing can be
 more restrictive and fragile, but is potentially much faster as there is no
 overhead for process start-up.
 .
 The fuzzer is linked with the library under test, and feeds fuzzed inputs to
 the library via a specific fuzzing entrypoint (aka 'target function'); the
 fuzzer then tracks which areas of the code are reached, and generates mutations
 on the corpus of input data in order to maximize the code coverage. The code
 coverage information for libFuzzer is provided by LLVM's SanitizerCoverage
 instrumentation.

Package: libfuzzer-16-dev
Description-md5: bc55cd127b8dab148b78e61e5e475b8e
Description-en: Library for coverage-guided fuzz testing
 LibFuzzer is a library for in-process, coverage-guided, evolutionary fuzzing
 of other libraries.
 .
 LibFuzzer is similar in concept to American Fuzzy Lop (AFL), but it performs
 all of its fuzzing inside a single process. This in-process fuzzing can be
 more restrictive and fragile, but is potentially much faster as there is no
 overhead for process start-up.
 .
 The fuzzer is linked with the library under test, and feeds fuzzed inputs to
 the library via a specific fuzzing entrypoint (aka 'target function'); the
 fuzzer then tracks which areas of the code are reached, and generates mutations
 on the corpus of input data in order to maximize the code coverage. The code
 coverage information for libFuzzer is provided by LLVM's SanitizerCoverage
 instrumentation.

Package: libghdl-2-0-0
Description-md5: 9040be609d2820ac4a850ea82c24c945
Description-en: VHDL compiler/simulator (shared library)
 GHDL is a compiler and simulator for VHDL, a Hardware Description Language.
 GHDL is not an interpreter: it allows you to analyse and elaborate sources to
 generate machine code from your design. Native program execution is the only
 way for high speed simulation.
 .
 This package contains the shared library to access GHDL internals.

Package: libghdl-dev
Description-md5: fe1250146eaf015da09547dd2b4cc0cf
Description-en: VHDL compiler/simulator (library development files)
 GHDL is a compiler and simulator for VHDL, a Hardware Description Language.
 GHDL is not an interpreter: it allows you to analyse and elaborate sources to
 generate machine code from your design. Native program execution is the only
 way for high speed simulation.
 .
 This package contains the files required to compile programs using libghdl.

Package: libgl1-mesa-glx
Description-md5: 635a93bcd1440d16621693fe064c2aa9
Description-en: transitional dummy package
 This is a transitional dummy package, it can be safely removed.

Package: libgles2-mesa
Description-md5: 635a93bcd1440d16621693fe064c2aa9
Description-en: transitional dummy package
 This is a transitional dummy package, it can be safely removed.

Package: libglib2.0-tests
Description-md5: 08c6a283a0e7547a1f8014a0ba341a09
Description-en: GLib library of C routines - installed tests
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains test programs, designed to be run as part of a
 regression testsuite.

Package: libiceoryx-binding-c-dev
Description-md5: 4a66c667ba7fda0c7671a98153ecd69b
Description-en: C bindings for the zero-copy inter-process communication library (headers)
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the development headers for the C bindings of Iceoryx.

Package: libiceoryx-binding-c2
Description-md5: 70d08448f8a0258bb6a2460b4f3cd3da
Description-en: C bindings for the zero-copy inter-process communication library
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This library provides the C bindings for Iceoryx.

Package: libiceoryx-hoofs-dev
Description-md5: 688b872d4d6133864305f97e7844ac29
Description-en: zero-copy inter-process communication HOOFS library headers
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provide the development headers for the low-level
 utilities and platform library of Iceoryx.
 HOOFS stands for "Handy Objects Optimized For Safety".

Package: libiceoryx-hoofs2
Description-md5: d1cb3a80ad0c9c917deca8c0d23ee931
Description-en: zero-copy inter-process communication HOOFS library
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the low-level utilities library of Iceoryx.
 HOOFS stands for "Handy Objects Optimized For Safety".

Package: libiceoryx-introspection-dev
Description-md5: 4f0c2e74b08d03b3f0337dd645230772
Description-en: zero-copy inter-process communication introspection library headers
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provide the development headers for the introspection library of
 Iceoryx.

Package: libiceoryx-introspection2
Description-md5: e77b73c89bd92718e558115060f29be9
Description-en: zero-copy inter-process communication introspection library
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the introspection library of Iceoryx.

Package: libiceoryx-platform2
Description-md5: 3cea0cbd78e326ba74c67ffec0c7c6f8
Description-en: zero-copy inter-process communication platform library
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the platform library of Iceoryx.

Package: libiceoryx-posh-config2
Description-md5: d5115cdce82e39d48b5dfa781a0e3aca
Description-en: zero-copy inter-process communication POSH config library
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the POSH config library of Iceoryx.
 POSH stands for "POsix SHared memory".

Package: libiceoryx-posh-dev
Description-md5: 461ad4b20970cbcaa5d82966a686c96d
Description-en: zero-copy inter-process communication POSH library headers
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the development headers for the POSH libraries
 of Iceoryx.
 POSH stands for "POsix SHared memory".

Package: libiceoryx-posh-gateway2
Description-md5: 3d7dd1f7aebe0c2f503c0508c804a4f7
Description-en: zero-copy inter-process communication POSH gateway library
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the POSH gateway library of Iceoryx.
 POSH stands for "POsix SHared memory".

Package: libiceoryx-posh-roudi2
Description-md5: b03bc7a6f2d7cc691115f8fb7f08f808
Description-en: zero-copy inter-process communication POSH RouDi library
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the RouDi-specific shared memory transport of Iceoryx.
 POSH stands for "POsix SHared memory". RouDi is the central management
 daemon for the shared memory transport.

Package: libiceoryx-posh2
Description-md5: 7ee9e53db2c099412511d418e0471629
Description-en: zero-copy inter-process communication POSH transport library
 Iceoryx is an inter-process communication (IPC) middleware for POSIX
 based operating systems. It features shared memory capabilities which
 allow a true zero-copy data transfer.
 .
 Originating from the automotive domain, it is crucial to transfer a huge
 amount of data between multiple processes to realize driver assistance
 systems or automated driving applications. Moreover, the same efficient
 communication mechanism can be applied to a broader range of use cases,
 e.g. in the field of robotics or game development.
 .
 This package provides the shared memory transport library of Iceoryx.
 POSH stands for "POsix SHared memory".

Package: libintelrdfpmath-dev
Description-md5: e95191996ac683da04f2788bf62b8cd3
Description-en: Intel Decimal Floating-Point Math Library
 Software implementation of the IEEE 754-2008 Decimal Floating-Point
 Arithmetic specification, aimed at financial applications, especially
 in cases where legal requirements make it necessary to use decimal, and
 not binary floating-point arithmetic (as computation performed with
 binary floating-point operations may introduce small, but unacceptable
 errors).

Package: libjakarta-interceptor-api-java
Description-md5: f959ee4e0a180c78e7f7617c9dd33e2f
Description-en: Jakarta Interceptors API
 Jakarta Interceptors are used to interpose on business method invocations
 and specific events such as lifecycle events and timeout events that occur
 on instances of Jakarta EE components and other managed classes.

Package: libjson-schema-modern-perl
Description-md5: 60b21ffaf66b9c78da094c843ff11df5
Description-en: module to validate JSON data against a schema
 JSON::Schema::Modern aims to be a fully-compliant JSON Schema evaluator and
 validator, targeting the currently-latest Draft 2020-12
 (https://json-schema.org/specification-links.html#2020-12).

Package: libjuh-java
Description-md5: 9e017c19c2cbf8cab7b83a1ee17e6890
Description-en: transitional package for LibreOffice UNO runtime environment
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This has now been merged into liblibreoffice-java and this package thus
 can be safely removed once installed.

Package: libjurt-java
Description-md5: 9e017c19c2cbf8cab7b83a1ee17e6890
Description-en: transitional package for LibreOffice UNO runtime environment
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This has now been merged into liblibreoffice-java and this package thus
 can be safely removed once installed.

Package: liblasso-perl
Description-md5: a6fed384a4da3dba999199b652c91c55
Description-en: Library for Liberty Alliance and SAML protocols - Perl bindings
 Lasso is an implementation of Liberty Alliance and related protocols, for
 network identity federations, single sign-on and other web services protocols.
 The main specifications implemented by the library are ID-FF, ID-WSF and SAML.
 .
 This package contains Perl bindings for liblasso, needed to use lasso
 in Perl applications.

Package: liblld-15
Description-md5: edabea654ba7a6bd671515adc0fffdd2
Description-en: LLVM-based linker, library
 LLD is a new, high-performance linker. It is built as a set of reusable
 components which highly leverage existing libraries in the larger LLVM
 Project.
 .
 This package contains the LLD runtime library.

Package: liblld-15-dev
Description-md5: d5f91d89aa80d28cd4d98b74563f075b
Description-en: LLVM-based linker, header files
 LLD is a new, high-performance linker. It is built as a set of reusable
 components which highly leverage existing libraries in the larger LLVM
 Project.
 .
 This package provides the header files to build extension over lld.

Package: liblld-16
Description-md5: edabea654ba7a6bd671515adc0fffdd2
Description-en: LLVM-based linker, library
 LLD is a new, high-performance linker. It is built as a set of reusable
 components which highly leverage existing libraries in the larger LLVM
 Project.
 .
 This package contains the LLD runtime library.

Package: liblld-16-dev
Description-md5: d5f91d89aa80d28cd4d98b74563f075b
Description-en: LLVM-based linker, header files
 LLD is a new, high-performance linker. It is built as a set of reusable
 components which highly leverage existing libraries in the larger LLVM
 Project.
 .
 This package provides the header files to build extension over lld.

Package: liblldb-15
Description-md5: 88542bb8337de28344a74df10ce94f4e
Description-en: Next generation, high-performance debugger, library
 LLDB is a next generation, high-performance debugger. It is built as a set of
 reusable components which highly leverage existing libraries in the larger LLVM
 Project, such as the Clang expression parser and LLVM disassembler.
 .
 This package contains the LLDB runtime library.

Package: liblldb-15-dev
Description-md5: 8f3dc7f570ba958d1f7496e3e5195498
Description-en: Next generation, high-performance debugger, header files
 LLDB is a next generation, high-performance debugger. It is built as a set of
 reusable components which highly leverage existing libraries in the larger LLVM
 Project, such as the Clang expression parser and LLVM disassembler.
 .
 This package provides the header files to build extension over lldb.

Package: liblldb-16
Description-md5: 88542bb8337de28344a74df10ce94f4e
Description-en: Next generation, high-performance debugger, library
 LLDB is a next generation, high-performance debugger. It is built as a set of
 reusable components which highly leverage existing libraries in the larger LLVM
 Project, such as the Clang expression parser and LLVM disassembler.
 .
 This package contains the LLDB runtime library.

Package: liblldb-16-dev
Description-md5: 8f3dc7f570ba958d1f7496e3e5195498
Description-en: Next generation, high-performance debugger, header files
 LLDB is a next generation, high-performance debugger. It is built as a set of
 reusable components which highly leverage existing libraries in the larger LLVM
 Project, such as the Clang expression parser and LLVM disassembler.
 .
 This package provides the header files to build extension over lldb.

Package: libllvm-15-ocaml-dev
Description-md5: 7727e410aa3baa784cb47a4afb95f4e8
Description-en: Modular compiler and toolchain technologies, OCaml bindings
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package provides the OCaml bindings to develop applications using llvm.

Package: libllvm-16-ocaml-dev
Description-md5: 7727e410aa3baa784cb47a4afb95f4e8
Description-en: Modular compiler and toolchain technologies, OCaml bindings
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package provides the OCaml bindings to develop applications using llvm.

Package: libllvm16
Description-md5: a8854f4edf76a8c14ce34dc209bd1d11
Description-en: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.

Package: libmediainfo-dev
Description-md5: 4c2245062ea2caf1c7a7453a3bf0062b
Description-en: library reading metadata from media files -- headers
 MediaInfo is a library used for retrieving technical information and other
 metadata about audio or video files.
 .
 A non-exhaustive list of the information MediaInfo can retrieve from media
 files include:
  - General: title, author, director, album, track number, date, duration...
  - Video: codec, aspect, fps, bitrate...
  - Audio: codec, sample rate, channels, language, bitrate...
  - Text: language of subtitle
  - Chapters: number of chapters, list of chapters
 .
 MediaInfo supports the following formats:
  - Video: MKV, OGM, AVI, DivX, WMV, QuickTime, Real, MPEG-1, MPEG-2,
           MPEG-4, DVD (VOB)...
  - Video Codecs: DivX, XviD, MSMPEG4, ASP, H.264, AVC...)
  - Audio: OGG, MP3, WAV, RA, AC3, DTS, AAC, M4A, AU, AIFF...
  - Subtitles: SRT, SSA, ASS, SAMI...
 .
 This package contains the headers and other development support files needed
 for compiling and linking applications and libraries which use this library.

Package: libmediainfo-doc
Description-md5: a09164a8756db0b41db83d61a332cfe4
Description-en: library for reading metadata from media files -- documentation
 MediaInfo is a library used for retrieving technical information and other
 metadata about audio or video files.
 .
 A non-exhaustive list of the information MediaInfo can retrieve from media
 files include:
  - General: title, author, director, album, track number, date, duration...
  - Video: codec, aspect, fps, bitrate...
  - Audio: codec, sample rate, channels, language, bitrate...
  - Text: language of subtitle
  - Chapters: number of chapters, list of chapters
 .
 MediaInfo supports the following formats:
  - Video: MKV, OGM, AVI, DivX, WMV, QuickTime, Real, MPEG-1, MPEG-2,
           MPEG-4, DVD (VOB)...
  - Video Codecs: DivX, XviD, MSMPEG4, ASP, H.264, AVC...)
  - Audio: OGG, MP3, WAV, RA, AC3, DTS, AAC, M4A, AU, AIFF...
  - Subtitles: SRT, SSA, ASS, SAMI...
 .
 This package contains the Doxygen generated API reference for developing
 applications/libraries using this library.

Package: libmediainfo0v5
Description-md5: 0d9ada95eeeb12fd1b1f4680f75efd55
Description-en: library for reading metadata from media files -- shared library
 MediaInfo is a library used for retrieving technical information and other
 metadata about audio or video files.
 .
 A non-exhaustive list of the information MediaInfo can retrieve from media
 files include:
  - General: title, author, director, album, track number, date, duration...
  - Video: codec, aspect, fps, bitrate...
  - Audio: codec, sample rate, channels, language, bitrate...
  - Text: language of subtitle
  - Chapters: number of chapters, list of chapters
 .
 MediaInfo supports the following formats:
  - Video: MKV, OGM, AVI, DivX, WMV, QuickTime, Real, MPEG-1, MPEG-2,
           MPEG-4, DVD (VOB)...
  - Video Codecs: DivX, XviD, MSMPEG4, ASP, H.264, AVC...)
  - Audio: OGG, MP3, WAV, RA, AC3, DTS, AAC, M4A, AU, AIFF...
  - Subtitles: SRT, SSA, ASS, SAMI...
 .
 This package contains the shared library needed for running applications which
 use this library.

Package: libmlir-16
Description-md5: b2671453793175bc5bd7c93d05c96c40
Description-en: Multi-Level Intermediate Representation library
 Novel approach to building reusable and extensible compiler infrastructure.
 MLIR aims to address software fragmentation, improve compilation for
 heterogeneous hardware, significantly reduce the cost of building domain
 specific compilers, and aid in connecting existing compilers together.

Package: libmlir-16-dev
Description-md5: b2671453793175bc5bd7c93d05c96c40
Description-en: Multi-Level Intermediate Representation library
 Novel approach to building reusable and extensible compiler infrastructure.
 MLIR aims to address software fragmentation, improve compilation for
 heterogeneous hardware, significantly reduce the cost of building domain
 specific compilers, and aid in connecting existing compilers together.

Package: libmojolicious-plugin-templatetoolkit-perl
Description-md5: 8c5b9f8a95f05bd3c27498344c1f325c
Description-en: Template Toolkit renderer plugin for Mojolicious
 Mojolicious::Plugin::TemplateToolkit is a renderer for tt2 or Template
 Toolkit templates. See Template and Template::Manual for details on the
 Template Toolkit format, and Mojolicious::Guides::Rendering for general
 information on rendering in Mojolicious.
 .
 Along with template files, inline and data section templates can be rendered
 in the standard Mojolicious fashion. Template files and data sections will be
 retrieved using Mojolicious::Renderer via Template::Provider::Mojo for both
 direct rendering and directives such as INCLUDE. This means that instead of
 specifying INCLUDE_PATH|Template::Manual::Config/"INCLUDE_PATH", you should
 set Mojolicious::Renderer/"paths" to the appropriate paths.
 .
  $app->renderer->paths(['/path/to/templates']);
 .
  push @{$app->renderer->paths}, '/path/to/more/templates';

Package: libmutter-test-12
Description-md5: 0e619df20013f2831da3a5dfc3597711
Description-en: Test helper library for GNOME's window manager library
 Mutter is a Wayland display server and X11 window manager and
 compositor library. It contains functionality related to, among other
 things, window management, window compositing, focus tracking, workspace
 management, keybindings and monitor configuration.
 .
 This package contains a private library used by the automated tests for
 mutter and gnome-shell. It should not be used by non-GNOME packages.

Package: libncurses5
Description-md5: d2741d94112e4fab829e84113efab968
Description-en: shared libraries for terminal handling (legacy version)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the legacy shared libraries necessary to run
 programs compiled with ncurses.

Package: libncursesw5
Description-md5: cdcff7ef64be4d2080a4f12e88e7a43e
Description-en: shared libraries for terminal handling (wide character legacy version)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the legacy shared libraries necessary to run
 programs compiled with ncursesw, which includes support for wide
 characters.

Package: libnrepl-clojure
Description-md5: 4110dbfedb2b89cc9ceed5fd550eb6ff
Description-en: Clojure network REPL
 nrepl provides a REPL server and client, along with some common APIs of
 use to IDEs and other tools that may need to evaluate Clojure code in remote
 environments.
 .
 This project is intended to be a replacement for tools.nrepl, which is no
 longer maintained.

Package: libomp-15-dev
Description-md5: 6f692a0e089a2d4587b533b4f246db62
Description-en: LLVM OpenMP runtime - dev package
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.

Package: libomp-15-doc
Description-md5: 55ecafb377674896611f496b3a8a1433
Description-en: LLVM OpenMP runtime - Documentation
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.
 .
 This package contains the documentation of this package.

Package: libomp-16-dev
Description-md5: 6f692a0e089a2d4587b533b4f246db62
Description-en: LLVM OpenMP runtime - dev package
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.

Package: libomp-16-doc
Description-md5: 55ecafb377674896611f496b3a8a1433
Description-en: LLVM OpenMP runtime - Documentation
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.
 .
 This package contains the documentation of this package.

Package: libomp5-15
Description-md5: e28f50eb4beb8e316b69da2c1c0194c3
Description-en: LLVM OpenMP runtime
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.

Package: libomp5-16
Description-md5: e28f50eb4beb8e316b69da2c1c0194c3
Description-en: LLVM OpenMP runtime
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.

Package: libopm-common
Description-md5: fa2fdadcd9a8abc6b4fb3956d49e0678
Description-en: Tools for Eclipse reservoir simulation files -- library
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 The Eclipse file format is widely used in the reservoir simulation
 community. This package provides library containing code for processing
 files in Eclipse format as well as utility code used by other OPM
 modules.

Package: libopm-common-bin
Description-md5: 0b7721ca0bfd02d60520174005663530
Description-en: Tools for Eclipse reservoir simulation files -- utility programs
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 The Eclipse file format is widely used in the reservoir simulation
 community. This package provides utility programs to process files
 in this format, like for comparing two files, converting between
 binary version and formatted text file format, etc.

Package: libopm-common-dev
Description-md5: 9f0c4321a4edd4076d38b2289c90d613
Description-en: Tools for Eclipse reservoir simulation files -- development files
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 This package contains the shared buildsystem of all OPM modules,
 the headers for input, parsing, and output of files in Eclipse format,
 a format widely used in the reservoir simulation community, and generic
 utilities used in other OPM modules.

Package: libopm-common-doc
Description-md5: 6d3a99580e17a54e28dd7e4ae43c3909
Description-en: Tools for Eclipse reservoir simulation files -- documentation
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 This package contains the source code documentation of library and tools
 for Eclipse reservoir simulation files.

Package: libopm-grid
Description-md5: 43e564721b92f6c16ececf703742368f
Description-en: DUNE grid implementations for reservoir simulation -- library
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-grid provides implementations of grids for reservoir simulation,
 corner point or more general pillar grids, following the DUNE grid interface:
 CpGrid, a parallel corner point grid, and PolyhedralGrid a more general serial
 grid implementation of an unstructured, legacy, grid.
 .
 A standard grid type in the petroleum industry, corner-point grids fills
 the domain with a relatively low number of cells while still providing
 sufficient flexibility to model faults, fractures and erosion. The grid
 format was originally designed with an eye towards geological modeling
 rather than numerical simulation, but is still suitable for e.g. low order
 finite volume discretizations.
 .
 This package provides the library of the grid implementations.

Package: libopm-grid-bin
Description-md5: daf5cfbf8d555d141fbbbe8e0be74f29
Description-en: corner point grid utility programs
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-grid provides implementations of grids for reservoir simulation,
 corner point or more general pillar grids, following the DUNE grid interface:
 CpGrid, a parallel corner point grid, and PolyhedralGrid a more general serial
 grid implementation of an unstructured, legacy, grid.
 .
 A standard grid type in the petroleum industry, corner-point grids fills
 the domain with a relatively low number of cells while still providing
 sufficient flexibility to model faults, fractures and erosion. The grid
 format was originally designed with an eye towards geological modeling
 rather than numerical simulation, but is still suitable for e.g. low order
 finite volume discretizations.
 .
 This package provides programs to mirror corner point grids specified in
 Eclipse file format and convert the corner point grid representation
 of an Eclipse together with permeability/porosity to file suitable
 for visualization with Paraview.

Package: libopm-grid-dev
Description-md5: fb8a51ca678b8a489fe8c21af32a4f03
Description-en: DUNE grid implementations for reservoir simulation -- development files
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-grid provides implementations of grids for reservoir simulation,
 corner point or more general pillar grids, following the DUNE grid interface:
 CpGrid, a parallel corner point grid, and PolyhedralGrid a more general serial
 grid implementation of an unstructured, legacy, grid.
 .
 A standard grid type in the petroleum industry, corner-point grids fills
 the domain with a relatively low number of cells while still providing
 sufficient flexibility to model faults, fractures and erosion. The grid
 format was originally designed with an eye towards geological modeling
 rather than numerical simulation, but is still suitable for e.g. low order
 finite volume discretizations.
 .
 This package provides the development files for the grid implementations,
 i.e. the headers and shared library links.

Package: libopm-grid-doc
Description-md5: d590b623b755f72e4588ba78c88f1dd8
Description-en: DUNE grid implementations for reservoir simulation -- documentation
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-grid provides implementations of grids for reservoir simulation,
 corner point or more general pillar grids, following the DUNE grid interface:
 CpGrid, a parallel corner point grid, and PolyhedralGrid a more general serial
 grid implementation of an unstructured, legacy, grid.
 .
 A standard grid type in the petroleum industry, corner-point grids fills
 the domain with a relatively low number of cells while still providing
 sufficient flexibility to model faults, fractures and erosion. The grid
 format was originally designed with an eye towards geological modeling
 rather than numerical simulation, but is still suitable for e.g. low order
 finite volume discretizations.
 .
 This package provides the source code documentation of the grid
 implementations.

Package: libopm-material-dev
Description-md5: af64ba945bb96b06c50bf070c368a835
Description-en: Material properties framework for porous media -- development files
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 This header-only library contains the generic code for calculating material
 properties used when simulating porous media flow. It includes utilities
 for calculating relative-permeability/capillary pressure laws,
 thermodynamic relations, flash solvers, empirical heat conduction laws,
 et cetera.It uses automatic differentiation for calculating the
 properties.
 .
 This package contains the development files (headers) needed.

Package: libopm-material-doc
Description-md5: 6b2e97938f1e5cb57159915d5ef2b544
Description-en: Material properties framework for porous media -- documentation
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 This header-only library contains the generic code for calculating material
 properties used when simulating porous media flow. It includes utilities
 for calculating relative-permeability/capillary pressure laws,
 thermodynamic relations, flash solvers, empirical heat conduction laws,
 et cetera. It uses automatic differentiation for calculating the
 properties.
 .
 This package contains the documentation of the source code.

Package: libopm-models-dev
Description-md5: a65ae495331050b8cfef5464736d4fff
Description-en: C++ simulation framework for porous media flow -- development files
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-models is a header-only simulation framework which is primary focused
 on fully implicit models for flow and transport in porous media. It uses
 finite volume schemes for discretization and automatic differentiation
 for calculating the Jacobians. Its main objectives is to provide an
 easily usable, well maintainable, high performance framework which is
 capable of capturing all macro-scale scenarios relevant for academic
 research and industrial applications involving flow and transport
 processes in porous media.
 .
 This package provides the development files (headers) needed to build
 applications based on opm-models.

Package: libopm-models-doc
Description-md5: 294105228c4c010ac772853318b3e41f
Description-en: C++ simulation framework for porous media flow -- documentation
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery
 .
 opm-models is a header-only simulation framework which is primary focused
 on fully implicit models for flow and transport in porous media. It uses
 finite volume schemes for discretization and automatic differentiation
 for calculating the Jacobians. Its main objectives is to provide an
 easily usable, well maintainable, high performance framework which is
 capable of capturing all macro-scale scenarios relevant for academic
 research and industrial applications involving flow and transport
 processes in porous media.
 .
 opm-models is a simulation framework which is primary focused on fully implicit
 models for flow and transport in porous media. It uses finite volume schemes
 for discretization and automatic differentiation for calculating the Jacobians.
 Its main objectives is to provide an easily usable, well maintainable,
 high performance framework which is capable of capturing all macro-scale
 scenarios relevant for academic research and industrial applications
 involving flow and transport processes in porous media.
 .
 This package provides the documentation of the source code.

Package: libopm-simulators
Description-md5: 56e1acedd6234c496183c4235f53d8b5
Description-en: Open porous media / reservoir simulators -- library
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-simulators provides a research (ebos) and a production (flow) fully
 implicit black-oil simulators, supporting one to three phases and
 supporting solvent and polymer options. It uses cell centered finite
 volume schemes with two point flux approximation and automatic
 differentiation for the discretization and uses state of the art linear
 and nonlinear solvers. It supports standard and multi segment well
 models and reading and writing file in Eclipse format, a very common
 format used in the oil reservoir simulation community.
 .
 Package provides the library used by the research (ebos) and production
 (flow) fully implicit  black-oil simulators.

Package: libopm-simulators-bin
Description-md5: a53078b54969f0808458867bd6bb2768
Description-en: Parallel porous media / reservoir simulators -- applications
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-simulators provides a research (ebos) and a production (flow) fully
 implicit black-oil simulators, supporting one to three phases and
 supporting solvent and polymer options. It uses cell centered finite
 volume schemes with two point flux approximation and automatic
 differentiation for the discretization and uses state of the art linear
 and nonlinear solvers. It supports standard and multi segment well
 models and reading and writing file in Eclipse format, a defacto
 industry standard in the oil reservoir simulation community.
 .
 Package provides the simulation programs.

Package: libopm-simulators-dev
Description-md5: 2081827cf2da00f50fdbcc42d393ba35
Description-en: Parallel porous media / reservoir simulators -- development files
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-simulators provides a research (ebos) and a production (flow) fully
 implicit black-oil simulators, supporting one to three phases and
 supporting solvent and polymer options. It uses cell centered finite
 volume schemes with two point flux approximation and automatic
 differentiation for the discretization and uses state of the art linear
 and nonlinear solvers. It supports standard and multi segment well
 models and reading and writing file in Eclipse format, a very common
 format used in the oil reservoir simulation community.
 .
 Package provides the development files (headers and shared library links).

Package: libopm-simulators-doc
Description-md5: 8b23700b16a9d881dea6ba8c0f73dea2
Description-en: Open porous media / reservoir simulators -- documentation
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-simulators provides a research (ebos) and a production (flow) fully
 implicit black-oil simulators, supporting one to three phases and
 supporting solvent and polymer options. It uses cell centered finite
 volume schemes with two point flux approximation and automatic
 differentiation for the discretization and uses state of the art linear
 and nonlinear solvers. It supports standard and multi segment well
 models and reading and writing file in Eclipse format, a very common
 format used in the oil reservoir simulation community.
 .
 Package provides documentation of the source code of the simulators.

Package: libopm-upscaling
Description-md5: f5adbe2326af653914969fa715f89e1a
Description-en: Porous media upscaling tools -- library
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-upscaling provides tools for single phase and relative permeability
 upscaling. During upscaling effective parameters (like porosity,
 permeability, and capillary pressure) for a simulation on a coarser scale
 are computed from properties of a simulation on a fine scale.
 .
 Package provides the shared library used by the upscaling applications.

Package: libopm-upscaling-bin
Description-md5: 341212c591ed4e125a15eda09b058803
Description-en: Porous media upscaling tools -- applications
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-upscaling provides tools for single phase and relative permeability
 upscaling. During upscaling effective parameters (like porosity,
 permeability, and capillary pressure) for a simulation on a coarser scale
 are computed from properties of a simulation on a fine scale.
 .
 Package provides the upscaling applications.

Package: libopm-upscaling-dev
Description-md5: 08651316d101be599bb4e8f3ced0912f
Description-en: Porous media upscaling tools -- development files
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-upscaling provides tools for single phase and relative permeability
 upscaling. During upscaling effective parameters (like porosity,
 permeability, and capillary pressure) for a simulation on a coarser scale
 are computed from properties of a simulation on a fine scale.
 .
 Package provides the development files (headers and shared library links).

Package: libopm-upscaling-doc
Description-md5: 64dcfd2b0519df9e7e7ab43e35aff3fc
Description-en: Porous media upscaling tools -- documentation
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-upscaling provides tools for single phase and relative permeability
 upscaling. During upscaling effective parameters (like porosity,
 permeability, and capillary pressure) for a simulation on a coarser scale
 are computed from properties of a simulation on a fine scale.
 .
 Package provides the documentation of the source code.

Package: libpipewire-0.3-modules-x11
Description-md5: 947ec05a4dd6cc7ab3d5c94a2bc2e326
Description-en: libraries for the PipeWire multimedia server - X11 modules
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains X11 modules.

Package: libpolly-16-dev
Description-md5: 840a80a0b2b70b4ddca3d4d6f53126e7
Description-en: High-level loop and data-locality optimizer
 Uses an abstract mathematical representation based on integer polyhedra
 to analyze and optimize the memory access pattern of a program

Package: libpython3.11-testsuite
Description-md5: 5daa6e7f215079fd7146f7487223d006
Description-en: Testsuite for the Python standard library (v3.11)
 The complete testsuite for the Python standard library.  Note that
 a subset is found in the libpython3.11-stdlib package, which should
 be enough for other packages to use (please do not build-depend
 on this package, but file a bug report to include additional
 testsuite files in the libpython3.11-stdlib package).

Package: libqt5concurrent5
Description-md5: e0df68f337531f2bfba6d9963eebfc16
Description-en: Qt 5 concurrent module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtConcurrent module contains functionality to support concurrent execution
 of program code.

Package: libqt5core5a
Description-md5: 75c9109eafc0c1da6d6b6ca7b292f133
Description-en: Qt 5 core module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtCore module contains core non-GUI functionality.

Package: libqt5dbus5
Description-md5: 66ed2fe869611cd7a269446bd63f9400
Description-en: Qt 5 D-Bus module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtDBus module is a Unix-only library that you can use to make Inter-Process
 Communication using the D-Bus protocol.
 .
 Applications using the QtDBus module can provide services to other, remote
 applications by exporting objects, as well as use services exported by those
 applications by placing calls and accessing properties.

Package: libqt5gui5
Description-md5: 9dadc5c1f0624a1be05b1ff4f1c6cd6d
Description-en: Qt 5 GUI module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtGui module extends QtCore with GUI functionality.

Package: libqt5network5
Description-md5: 267676193dcb13e33a5c3f9c219b1838
Description-en: Qt 5 network module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtNetwork module offers classes that allow you to write TCP/IP clients and
 servers. It provides classes to make network programming easier and portable.

Package: libqt5opengl5
Description-md5: 0966e72b3545e5c76ba7176064c64965
Description-en: Qt 5 OpenGL module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtOpenGL module offers classes that make it easy to use OpenGL in Qt
 applications.
 .
 OpenGL is a standard API for rendering 3D graphics. OpenGL only deals with 3D
 rendering and provides little or no support for GUI programming issues.

Package: libqt5opengl5-dev
Description-md5: 76f1fd5b0a241ef67384ff7dfbd93542
Description-en: Qt 5 OpenGL library development files
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the development files needed to build Qt 5 applications
 using QtOpenGL library.

Package: libqt5printsupport5
Description-md5: ad2a0dcae2a6addab1c4c4b7c64b6a4e
Description-en: Qt 5 print support module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtPrintSupport module provides classes to make printing easier and
 portable.

Package: libqt5sql5
Description-md5: 0713fa3e9592ca24526ad333118f8889
Description-en: Qt 5 SQL module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtSql module helps you provide seamless database integration to your Qt
 applications.

Package: libqt5sql5-ibase
Description-md5: 795132c8ae8170c30afb981caa53c8cf
Description-en: Qt 5 Firebird database driver
 This package contains the Firebird plugin for Qt 5.
 .
 Install it if you intend to use or write Qt programs that are to access a
 Firebird/InterBase DB.

Package: libqt5sql5-mysql
Description-md5: ef00502b07fd416665becb7a946fa058
Description-en: Qt 5 MySQL database driver
 This package contains the MySQL plugin for Qt 5.
 .
 Install it if you intend to use or write Qt programs that are to access a
 MySQL DB.

Package: libqt5sql5-odbc
Description-md5: 307a8af530b7222b52853293e564167c
Description-en: Qt 5 ODBC database driver
 This package contains the ODBC plugin for Qt 5.
 .
 Install it if you intend to use or write Qt programs that are to access an
 ODBC DB.

Package: libqt5sql5-psql
Description-md5: 26b8a37b36abcc581802bb9591e003d6
Description-en: Qt 5 PostgreSQL database driver
 This package contains the PostgreSQL plugin for Qt 5.
 .
 Install it if you intend to use or write Qt programs that are to access a
 PostgreSQL DB.

Package: libqt5sql5-sqlite
Description-md5: f74ea3b242033484777e5a5e9fb468bc
Description-en: Qt 5 SQLite 3 database driver
 This package contains the SQLite 3 plugin for Qt 5.
 .
 Install it if you intend to use or write Qt programs that are to access an
 SQLite 3 DB.

Package: libqt5sql5-tds
Description-md5: 98049901ac7df77f69890567ec4a2170
Description-en: Qt 5 FreeTDS database driver
 This package contains the FreeTDS plugin for Qt 5.
 .
 Install it if you intend to use or write Qt programs that are to access a
 MS SQL or Sybase SQL server.

Package: libqt5test5
Description-md5: 439bbed1193cb169575d82d618b4c6c1
Description-en: Qt 5 test module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtTest module provides classes for unit testing Qt applications and
 libraries.

Package: libqt5widgets5
Description-md5: d3e73eff3b63455d65d61db3b685f693
Description-en: Qt 5 widgets module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtWidgets module extends QtGui with C++ widget functionality.

Package: libqt5xml5
Description-md5: c3b1596533c67529df54c353807c6cae
Description-en: Qt 5 XML module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtXml module provides a stream reader and writer for XML documents,
 and C++ implementations of SAX and DOM.

Package: libqt6concurrent6
Description-md5: 9cec83c0f4093047ba7e32ad593d5a17
Description-en: Qt 6 concurrent module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtConcurrent module contains functionality to support concurrent execution
 of program code.

Package: libqt6core6
Description-md5: ed80e594b46abbc607aba1af415d15fe
Description-en: Qt 6 core module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtCore module contains core non-GUI functionality.

Package: libqt6dbus6
Description-md5: 20382f17c87d23906db49d6aff3e0465
Description-en: Qt 6 D-Bus module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtDBus module is a Unix-only library that you can use to make Inter-Process
 Communication using the D-Bus protocol.
 .
 Applications using the QtDBus module can provide services to other, remote
 applications by exporting objects, as well as use services exported by those
 applications by placing calls and accessing properties.

Package: libqt6gui6
Description-md5: f07aad264aff41f35affdd7048a48ba2
Description-en: Qt 6 GUI module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtGui module extends QtCore with GUI functionality.

Package: libqt6network6
Description-md5: d7dc5b8f2c46f21b15001c31c8361c8a
Description-en: Qt 6 network module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtNetwork module offers classes that allow you to write TCP/IP clients and
 servers. It provides classes to make network programming easier and portable.

Package: libqt6opengl6
Description-md5: ab5139665c337d66ad0eee00d9dc3f85
Description-en: Qt 6 OpenGL module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtOpenGL module offers classes that make it easy to use OpenGL in Qt
 applications.
 .
 OpenGL is a standard API for rendering 3D graphics. OpenGL only deals with 3D
 rendering and provides little or no support for GUI programming issues.

Package: libqt6opengl6-dev
Description-md5: 918fa63007403934370f8d0fb26ac548
Description-en: Qt 6 OpenGL library development files
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the development files needed to build Qt 6 applications
 using the QtOpenGL library.

Package: libqt6openglwidgets6
Description-md5: fda40a8dcce2f181f56eb4d655f044b5
Description-en: Qt 6 OpenGL widgets module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtOpenGL module offers classes that make it easy to use OpenGL in Qt
 applications.
 .
 OpenGL is a standard API for rendering 3D graphics. OpenGL only deals with 3D
 rendering and provides little or no support for GUI programming issues.
 .
 The OpenGL widgets module provides the widget for rendering OpenGL graphics.

Package: libqt6printsupport6
Description-md5: dcb2db28fa663896211cb6e41decc68c
Description-en: Qt 6 print support module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtPrintSupport module provides classes to make printing easier and
 portable.

Package: libqt6sql6
Description-md5: 57e79d838a6fcee7447f0e8d47e77121
Description-en: Qt 6 SQL module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtSql module helps you provide seamless database integration to your Qt
 applications.

Package: libqt6sql6-ibase
Description-md5: 2115a91d0211d788aae589355ea1607a
Description-en: Qt 6 Firebird database driver
 This package contains the Firebird plugin for Qt 6.
 .
 Install it if you intend to use or write Qt programs that are to access a
 Firebird/InterBase DB.

Package: libqt6sql6-mysql
Description-md5: 16631a538bfca86f8fd1847b0951a3ca
Description-en: Qt 6 MySQL database driver
 This package contains the MySQL plugin for Qt 6.
 .
 Install it if you intend to use or write Qt programs that are to access a
 MySQL DB.

Package: libqt6sql6-odbc
Description-md5: 2efb5f41197d91ce21a9548565aeda61
Description-en: Qt 6 ODBC database driver
 This package contains the ODBC plugin for Qt 6.
 .
 Install it if you intend to use or write Qt programs that are to access an
 ODBC DB.

Package: libqt6sql6-psql
Description-md5: 99db9d30d2cd0b7c8e26d832434bcf1e
Description-en: Qt 6 PostgreSQL database driver
 This package contains the PostgreSQL plugin for Qt 6.
 .
 Install it if you intend to use or write Qt programs that are to access a
 PostgreSQL DB.

Package: libqt6sql6-sqlite
Description-md5: e4d133d22563b7455e47e1144e40a2b6
Description-en: Qt 6 SQLite 3 database driver
 This package contains the SQLite 3 plugin for Qt 6.
 .
 Install it if you intend to use or write Qt programs that are to access an
 SQLite 3 DB.

Package: libqt6test6
Description-md5: 04fef6f2638f7e52d1818d6708483554
Description-en: Qt 6 test module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtTest module provides classes for unit testing Qt applications and
 libraries.

Package: libqt6widgets6
Description-md5: dee1fa987803bb779f9789877ed5e2c5
Description-en: Qt 6 widgets module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtWidgets module extends QtGui with C++ widget functionality.

Package: libqt6xml6
Description-md5: cc74db0521d7ab3d5dd5db432fb38e34
Description-en: Qt 6 XML module
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 The QtXml module provides a stream reader and writer for XML documents,
 and C++ implementations of SAX and DOM.

Package: libreoffice
Description-md5: 9614e13c8592ae9a0c81c629137ef53e
Description-en: office productivity suite (metapackage)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This metapackage installs all components of libreoffice:
  * libreoffice-writer: Word processor
  * libreoffice-calc: Spreadsheet
  * libreoffice-impress: Presentation
  * libreoffice-draw: Drawing
  * libreoffice-base: Database
  * libreoffice-math: Equation editor
 It also recommends additional packages (e.g. fonts) in order to match an
 upstream LibreOffice install as closely as possible.
 .
 You can extend the functionality of LibreOffice by installing these
 packages:
  * hunspell-*/myspell-*: Hunspell/Myspell dictionaries
    for use with LibreOffice
  * libreoffice-l10n-*: UI interface translation
  * libreoffice-help-*: User help
  * mythes-*: Thesauri for the use with LibreOffice
  * hyphen-*: Hyphenation patterns for LibreOffice
  * libreoffice-gtk(2|3): Gtk UI Plugin, GNOME File Picker support
  * libreoffice-gnome: GIO backend
  * unixodbc: ODBC database support
  * cups-bsd: Allows LibreOffice to detect your CUPS printer queues
    automatically
  * libsane: Use your sane-supported scanner with LibreOffice
  * libxrender1: Speed up display by using Xrender library
  * libgl1: OpenGL support
  * openclipart-libreoffice: Open Clip Art Gallery with LibreOffice index
    files
  * firefox-esr | thunderbird | firefox:
    Mozilla profile with Certificates needed for XML Security...
  * openjdk-11-jre | openjdk-8-jre | java8-runtime:
    Java Runtime Environment for use with LibreOffice
  * pstoedit / imagemagick / ghostscript: helper tools for EPS
  * gstreamer0.10-plugins-*: GStreamer plugins for use with LibreOffices
    media backend
  * libpaper-utils: papersize detection support via paperconf
  * bluez: Bluetooth support for Impress (slideshow remote control)

Package: libreoffice-avmedia-backend-gstreamer
Description-md5: ec62ab16ee0666e01ee5915457261f88
Description-en: transitional package for GStreamer backend for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package used to contain the GStreamer backend for LibreOffice.
 This has now been merged into the "core" package and this package thus
 can be safely removed once installed.

Package: libreoffice-base
Description-md5: 5529fff5c628ca6b70284749063daea4
Description-en: office productivity suite -- database
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the database component for LibreOffice.

Package: libreoffice-base-drivers
Description-md5: 95a600bf1d7e583b757fe5b8ea210d10
Description-en: Database connectivity drivers for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the database connectivity drivers used by LibreOffices
 database functionality:
  - ODBC
  - JDBC
  - dBase
  - Calc
  - Flat files
 .
 You can extend this by installing:
 .
  * unixodbc: ODBC database support
  * libmyodbc | odbc-postgresql | libsqliteodbc | tdsodbc | odbc-mdbtools: ODBC
    drivers for:
    - MySQL
    - PostgreSQL
    - SQLite
    - MS SQL / Sybase SQL
    - *.mdb (JET / MS Access)
  * libmariadb-java | libpg-java | libjtds-java: JDBC Drivers
    for:
    - MySQL/MariaDB
    - PostgreSQL
    - MS SQL Server and Sybase
  * libreoffice-sdbc-hsqldb: embedded HSQLDB SDBC Driver
  * libreoffice-sdbc-firebird: Firebird SDBC Driver
  * libreoffice-sdbc-postgresql: PostgreSQL SDBC Driver
  * libreoffice-sdbc-mysql: MySQL/MariaDB SDBC Driver

Package: libreoffice-base-nogui
Description-md5: e83dd6cdb7c67ccb13c0407fd6a32ebc
Description-en: office productivity suite -- database (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the database component for LibreOffice.

Package: libreoffice-calc-nogui
Description-md5: ed9483b973f6b2dd25d568b6ef77d8c4
Description-en: office productivity suite -- spreadsheet (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the spreadsheet component for LibreOffice
 for use with libreoffice-core-nogui.

Package: libreoffice-core-nogui
Description-md5: d16e9871c20b5b5c8f38d6d74c8dfe8e
Description-en: office productivity suite -- arch-dependent files (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the architecture-dependent core files of
 LibreOffice without GUI support for server-based or commandline usage of
 LibreOffice.

Package: libreoffice-dev-gui
Description-md5: c7381cdfc5446c44dd4085615626c61e
Description-en: office productivity suite -- "GUI" development stuff
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the gengal utility which was moved from
 libreoffice-dev.

Package: libreoffice-draw-nogui
Description-md5: c4d7d9707b31ef9344d70e006f7a27af
Description-en: office productivity suite -- drawing (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the drawing component for LibreOffice.

Package: libreoffice-evolution
Description-md5: 7d9a6b62e74d5a806f263ecd0d4bed18
Description-en: office productivity suite -- Evolution addressbook support
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package allows LibreOffice to access Evolution address books.
 You need to install evolution separately.

Package: libreoffice-gtk2
Description-md5: 16f95bd9c26683a4b4582a981ca1a3a2
Description-en: transitional package for LibreOffice gtk2 backend
 This package used to contain the LibreOffice gtk2 backend.
 .
 You can safely remove this package.

Package: libreoffice-gtk4
Description-md5: 7cbb2e1ddd519ed979f5c41206377dd3
Description-en: office productivity suite -- GTK+ 4 integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the Gtk plugin for drawing LibreOffices widgets
 with Gtk+ 4 and Gtk/GNOMEish print dialog.
 .
 You need to enable it manually by export SAL_USE_VCLPLUGIN=gtk4.

Package: libreoffice-impress-nogui
Description-md5: 10ce2c27d434135cd9308937c1bdb31c
Description-en: office productivity suite -- presentation (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the presentation component for LibreOffice.

Package: libreoffice-kde4
Description-md5: e4e138701097a40ac3baad803dbce01d
Description-en: transitional package for LibreOffice KDE integration
 This package used to contain the LibreOffice KDE 4 backend.
 .
 You can safely remove this package.

Package: libreoffice-kde5
Description-md5: 9ba37e0af16899bba520effef300bdf2
Description-en: transitional package for LibreOffice "KDE 5" integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package used to contain the "KDE 5" integration. It was split
 into -kf5 (KF5 UI plugin) and -plasma (some Plasma integration). This
 packsge can be safely removed once installed.

Package: libreoffice-kf5
Description-md5: 60a27e47a640a57cbd044cc3528831f5
Description-en: office productivity suite -- KDE Frameworks 5 integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the KF5 plugin for LibreOffice and a KF5-based File
 Picker when running under Plasma.

Package: libreoffice-librelogo
Description-md5: cdaef056eb365a457e28772fa2fd9de6
Description-en: Logo-like programming language for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains Librelogo, which is a pyuno-based Logo-like programming
 language with interactive vectorgraphics for education and DTP
  - basic Logo syntax for back compatibility with educational Logo systems
  - interactive vectorgraphics in LibreOffice Writer
  - native commands (easily translatable)
  - Python data structures (list, tuple, set, dictionary) and other Python
    features

Package: libreoffice-math-nogui
Description-md5: e104f51d572d2ee302d3c3550e97e6ff
Description-en: office productivity suite -- equation editor (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the equation editor component for LibreOffice.

Package: libreoffice-mysql-connector
Description-md5: f67e8b039d42be412b79ebf1381a0f85
Description-en: transitional package for MariaDB/MySQL Connector extension for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package used to contain the LibreOffice MySQL/MariaDB Connector extension.
 This has now been added to the "main" packages (libreoffice-sdbc-mysql)
 and this package thus can be safely removed once installed.

Package: libreoffice-nogui
Description-md5: b2664061ba9641158b0a41d2c958aa3e
Description-en: office productivity suite (metapackage, no GUI)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This metapackage installs all components of libreoffice:
  * libreoffice-writer: Word processor
  * libreoffice-calc: Spreadsheet
  * libreoffice-impress: Presentation
  * libreoffice-draw: Drawing
  * libreoffice-base: Database
  * libreoffice-math: Equation editor
 .
 WITHOUT GUI SUPPORT.
 .
 This package is intended mostly for scripting needs.

Package: libreoffice-ogltrans
Description-md5: e0adf62d9e3c2e44012570545627fe8d
Description-en: transitional package for libreoffice-ogltrans
 This package used to contain the OpenGL slide transitions for LibreOffice
 Impress.
 That has been merged into libreoffice-impress directly and thus this package
 can be safely removed.

Package: libreoffice-plasma
Description-md5: 962e5fa862a2425941adbcdb81054cc7
Description-en: office productivity suite -- some Plasma integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains some minor Plasma integration (like AppData
 and "Create New..." integration) and a KDE/KF5 configuration backend.

Package: libreoffice-qt5
Description-md5: 459572943562e2a51d6e9c1c30d84c71
Description-en: office productivity suite -- Qt 5 integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the Qt 5 plugin for drawing LibreOffices widgets
 with Qt 5 and a Qt File Picker and print dialog.
 .
 You need to enable it manually by export SAL_USE_VCLPLUGIN=qt5 if you are
 not using Plasma.

Package: libreoffice-qt6
Description-md5: a45aee748dd8cc60d61451e1f7253f31
Description-en: office productivity suite -- Qt 6 integration
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the Qt 6 plugin for drawing LibreOffices widgets
 with Qt 6 and a Qt File Picker and print dialog.
 .
 You need to enable it manually by export SAL_USE_VCLPLUGIN=qt6.

Package: libreoffice-report-builder
Description-md5: 8239ceaa4ebaf25c2b15325d48eb907c
Description-en: LibreOffice component for building database reports
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the report builder:
  "Create with the Sun Report Builder stylish, smart-looking database reports.
  The flexible report editor can define group and page headers as well as
  group and page footers and even calculation fields are available to
  accomplish complex database reports."

Package: libreoffice-report-builder-bin
Description-md5: 4de9416ad29a7951be39b95f83055e84
Description-en: LibreOffice component for building database reports -- libraries
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains some architecture-dependent support libraries
 (librpt*.so) for the report builder component.

Package: libreoffice-report-builder-bin-nogui
Description-md5: 6d5263ac65fb4d1c4c7caf8eb713944d
Description-en: LibreOffice component for building database reports -- libraries (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains some architecture-dependent support libraries
 (librpt*.so) for the report builder component.

Package: libreoffice-script-provider-bsh
Description-md5: 720bef09745ce9eb4902772fb5c437d8
Description-en: BeanShell script support provider for LibreOffice scripting framework
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The Scripting Framework allows LibreOffice users to write and run macros
 in multiple languages including LibreOffice Basic, Python, Java, BeanShell
 and JavaScript. These macros can then be assigned to menus, toolbars,
 keyboard shortcuts, events and embedded objects.
 .
 This package contains the script provider to support BeanShell.

Package: libreoffice-script-provider-js
Description-md5: 41b18315e9be2aaa24a28415b907118e
Description-en: JavaScript script support provider for LibreOffice scripting framework
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The Scripting Framework allows LibreOffice users to write and run macros
 in multiple languages including LibreOffice Basic, Python, Java, BeanShell
 and JavaScript. These macros can then be assigned to menus, toolbars,
 keyboard shortcuts, events and embedded objects.
 .
 This package contains the script provider to support JavaScript.

Package: libreoffice-script-provider-python
Description-md5: 019117f2dc708fc6c1179714b81e2076
Description-en: Python script support provider for LibreOffice scripting framework
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The Scripting Framework allows LibreOffice users to write and run macros
 in multiple languages including LibreOffice Basic, Python, Java, BeanShell
 and JavaScript. These macros can then be assigned to menus, toolbars,
 keyboard shortcuts, events and embedded objects.
 .
 This package contains the script provider to support Python.

Package: libreoffice-sdbc-firebird
Description-md5: 4ad372e2554b0f42b39c7e1325d5e6d0
Description-en: Firebird SDBC driver for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The Firebird SDBC Driver allows one to use the Firebird database from
 LibreOffice without any wrapper layer such as ODBC or JDBC.

Package: libreoffice-sdbc-hsqldb
Description-md5: 54ed9715a25b1dae2ad2d3a9b6838a65
Description-en: HSQLDB SDBC driver for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The HSQLDB SDBC Driver allows one to use the HSQLDB embedded database from
 LibreOffice without any wrapper layer such as ODBC or JDBC.

Package: libreoffice-sdbc-mysql
Description-md5: 1022a8fb85f50d65847256d96ae25e4f
Description-en: MariaDB/MySQL SDBC driver for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The MariaDB/MySQL driver allows one to use the MariaDB or MySQL
 database from LibreOffice without any wrapper layer such as ODBC or JDBC.

Package: libreoffice-sdbc-postgresql
Description-md5: 06f71158aa78dbe7201679601bd1279b
Description-en: PostgreSQL SDBC driver for LibreOffice
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 The PostgreSQL SDBC Driver allows one to use the PostgreSQL database from
 LibreOffice without any wrapper layer such as ODBC or JDBC.

Package: libreoffice-smoketest-data
Description-md5: 7540f40cccbf63cb8381dca8979a0828
Description-en: data files for LibreOffices "smoketest"
 Data files for the LibreOffice "smoketest".

Package: libreoffice-style-breeze
Description-md5: b3a725e09462ccaec72c3b8bb964827b
Description-en: office productivity suite -- Breeze symbol style
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the "breeze" symbol style, default style for KDE 5.

Package: libreoffice-style-galaxy
Description-md5: cbafee8b95c2851c166a1f1a2f92ac6c
Description-en: transitional package for Galaxy symbol style
 You can safely remove this package.

Package: libreoffice-style-hicontrast
Description-md5: c975e10f61063cef8dfc736499943c67
Description-en: transitional package for Hicontrast symbol style
 You can safely remove this package.

Package: libreoffice-style-karasa-jaga
Description-md5: 62dc98488a5247cbad91f4e0ec562bcf
Description-en: office productivity suite -- Karasa Jaga symbol style
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the "karasa_jaga" symbol style.

Package: libreoffice-style-oxygen
Description-md5: 0eea86d70908d194875d1d231cf95716
Description-en: transitional package for Oxygen symbol style
 You can safely remove this package.

Package: libreoffice-style-sifr
Description-md5: 0fd5516a8dab8f6841c284edea8786d7
Description-en: office productivity suite -- Sifr symbol style
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the "sifr" symbol style (an adaption of the Gnome
 symbolic theme), needs to be manually  enabled in the LibreOffice option
 menu.

Package: libreoffice-style-sukapura
Description-md5: b9dbd94d0660dbc8a05ba918cb3fb897
Description-en: office productivity suite -- Sukapura symbol style
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the "sukapura" symbol style.

Package: libreoffice-style-tango
Description-md5: aaf8968f6a7dfef93cd3c0082bbe8dbd
Description-en: transitional package for Tango symbol style
 You can safely remove this package.

Package: libreoffice-subsequentcheckbase
Description-md5: cda482c5487d616e1ae7a228fce1d955
Description-en: LibreOffice java test libraries
 Java libraries LibreOffice subsequentchecks integration test suite

Package: libreoffice-systray
Description-md5: 7af566a55c39207b389151276dad569a
Description-en: transitional package for removed LibreOffice "Quickstarter"
 You can safely remove this package.

Package: libreoffice-wiki-publisher
Description-md5: a66aaa282ae4941588a4d314d1ebbf79
Description-en: LibreOffice extension for working with MediaWiki articles
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains an extension to create/edit/publish MediaWiki
 articles with LibreOffice

Package: libreoffice-writer-nogui
Description-md5: 963dc225bb14f9e5974345a7995f16a7
Description-en: office productivity suite -- word processor (no GUI variant)
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This package contains the wordprocessor component for LibreOffice.

Package: librhino-java
Description-md5: 56304b110a7e11df7b042a8bec6b6f22
Description-en: Libraries for rhino Java Script Engine
 Rhino is an implementation of the JavaScript language written
 entirely in Java. It is typically embedded into Java applications to
 provide scripting to end users.
 .
 This package contains only Java library and no interpreter. For
 Rhino interpreter, you install rhino package.

Package: libridl-java
Description-md5: 9e017c19c2cbf8cab7b83a1ee17e6890
Description-en: transitional package for LibreOffice UNO runtime environment
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This has now been merged into liblibreoffice-java and this package thus
 can be safely removed once installed.

Package: librm-dev
Description-md5: 6a200d08f9db64d5975278cbd60c8367
Description-en: FritzBox router manager library -- development files
 librm offers FRITZ!Box related core functionality for Roger Router (GUI),
 Roger CLI (CLI) and Roger Rabbit (ncurses) interfaces.
 .
 This package provides development files.

Package: librm0
Description-md5: 53bef5d3f5aeb99442793215be66398b
Description-en: FritzBox router manager library
 librm offers FRITZ!Box related core functionality for Roger Router (GUI),
 Roger CLI (CLI) and Roger Rabbit (ncurses) interfaces.

Package: librust-ahash-dev
Description-md5: 320121ba7698b3f790d3f0b55086887d
Description-en: non-cryptographic hash function - Rust source code
 AHash is the fastest, DOS resistant hash currently available in Rust.
 AHash is intended *exclusively* for use in in-memory hashmaps.
 .
 AHash's output is of high quality
 but aHash is **not** a cryptographically secure hash.
 .
 This package contains the source for the Rust ahash crate,
 packaged for use with cargo and dh-cargo.

Package: librust-capng-dev
Description-md5: e31179744d24b863b6058e95d2e49196
Description-en: Rust wrapper for libcap-ng - Rust source code
 This package contains the source for the Rust capng crate, packaged by debcargo
 for use with cargo and dh-cargo.

Package: librust-diesel-dev
Description-md5: f1223c831ae55cbd2204f435f6f47f22
Description-en: Safe and extensible ORM and Query Builder - Rust source code
 This package contains the source for the Rust diesel crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: librust-diesel-migrations-dev
Description-md5: e710f019b668c19c6a032674c899501d
Description-en: Migration management for diesel - Rust source code
 This package contains the source for the Rust diesel_migrations crate, packaged
 by debcargo for use with cargo and dh-cargo.

Package: librust-io-uring-dev
Description-md5: 2bb7ced06a5a8bd29f34d4dcb72ae0bf
Description-en: Low-level `io_uring` userspace interface for Rust - Rust source code
 This package contains the source for the Rust io-uring crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: librust-libseccomp-sys-dev
Description-md5: cec4fe03200b3724db499b5293b56256
Description-en: Raw FFI Bindings for the libseccomp Library - Rust source code
 This package contains the source for the Rust libseccomp-sys crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: librust-owned-ttf-parser-dev
Description-md5: 09ebf709c607e7e525fabe035f5a56d2
Description-en: Ttf-parser plus support for owned data - Rust source code
 This package contains the source for the Rust owned_ttf_parser crate, packaged
 by debcargo for use with cargo and dh-cargo.

Package: librust-path-clean-dev
Description-md5: 9d83779a0493f49af63997664bcc02c3
Description-en: Cleanname or path.Clean - Rust source code
 This package contains the source for the Rust path-clean crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: librust-pyo3-file-dev
Description-md5: c4abbf6e3ad6989b01dde15f2d7fc0c5
Description-en: Small helper library for working with python file-like objects with rust - Rust source code
 This package contains the source for the Rust pyo3-file crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: librust-rgb-dev
Description-md5: 86623a1d01bbf881c6392863fa7501af
Description-en: `struct RGB/RGBA/etc.` for sharing pixels between crates + convenience methods for color manipulation - Rust source code
 Allows no-copy high-level interoperability. Also adds common convenience
 methods and implements standard Rust traits to make `RGB`/`RGBA` pixels and
 slices first-class Rust objects.
 .
 This package contains the source for the Rust rgb crate, packaged by debcargo
 for use with cargo and dh-cargo.

Package: librust-sc-dev
Description-md5: 5de5d42eed57261636704f08d3049dc2
Description-en: Raw system calls - Rust source code
 This package contains the source for the Rust sc crate, packaged by debcargo
 for use with cargo and dh-cargo.

Package: librust-sftp-dev
Description-md5: 9e2b651a6abd8de3c19f177d2c1a13f6
Description-en: SFTP Implementation - Rust source code
 This package contains the source for the Rust sftp crate, packaged by debcargo
 for use with cargo and dh-cargo.

Package: librust-virtiofsd-dev
Description-md5: dfa14dadcdcd7320526c01d2f5554c88
Description-en: Virtio-fs vhost-user device daemon - Rust source code
 This package contains the source for the Rust virtiofsd crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: libs3-2
Description-md5: eb85f7da5574dc8195aa83358c98e894
Description-en: C Library and Tools for Amazon S3 Access
 This package includes the libs3 shared object library, needed to run
 applications compiled against libs3, and additionally contains the s3
 utility for accessing Amazon S3.

Package: libs3-dev
Description-md5: e05795dcf95b10c133f29bd0403dc3c8
Description-en: C Development Library for Amazon S3 Access
 This package includes the libs3 header, needed to compile applications
 against libs3.

Package: libsasl2-modules-gssapi-heimdal
Description-md5: 0897adbbfbdac08aea71f426460e48d0
Description-en: Pluggable Authentication Modules for SASL (GSSAPI)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the GSSAPI plugin, compiled with the Heimdal
 Kerberos 5 library.

Package: libsasl2-modules-ldap
Description-md5: 046fb452cdaf5f7c51dacdbf2922d5de
Description-en: Cyrus SASL - pluggable authentication modules (LDAP)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the LDAP plugin, which supports OpenLDAP.

Package: libsasl2-modules-otp
Description-md5: fb6fbc4df1a9ad29b0ddb7f30c4d227f
Description-en: Cyrus SASL - pluggable authentication modules (OTP)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the OTP plugin, which supports one time passwords.

Package: libsimde-dev
Description-md5: 365b10d48a705f04d00cad192b9ea9f1
Description-en: Implementations of SIMD instructions for all systems
 SIMDe provides fast, portable implementations of SIMD intrinsics on hardware
 which doesn't natively support them, such as calling SSE functions on ARM.
 There is no performance penalty if the hardware supports the native
 implementation (e.g., SSE/AVX runs at full speed on x86, NEON on ARM, etc.).
 .
 This makes porting code to other architectures much easier in a few key ways:
 .
 First, instead of forcing you to rewrite everything for each architecture,
 SIMDe lets you get a port up and running almost effortlessly. You can then
 start working on switching the most performance-critical sections to native
 intrinsics, improving performance gradually. SIMDe lets (for example) SSE/AVX
 and NEON code exist side-by-side, in the same implementation.
 .
 Second, SIMDe makes it easier to write code targeting ISA extensions you don't
 have convenient access to. You can run NEON code on your x86 machine without an
 emulator. Obviously you'll eventually want to test on the actual hardware
 you're targeting, but for most development, SIMDe can provide a much easier
 path.
 .
 SIMDe takes a very different approach from most other SIMD abstraction layers
 in that it aims to expose the entire functionality of the underlying
 instruction set. Instead of limiting functionality to the lowest common
 denominator, SIMDe tries to minimize the amount of effort required to port
 while still allowing you the space to optimize as needed.
 .
 The current focus is on writing complete portable implementations, though a
 large number of functions already have accelerated implementations using one
 (or more) of the following:
 .
     SIMD intrinsics from other ISA extensions (e.g., using NEON to implement
 SSE).
     Compiler-specific vector extensions and built-ins such as
 __builtin_shufflevector and __builtin_convertvector
     Compiler auto-vectorization hints, using:
        OpenMP 4 SIMD
        Cilk Plus
        GCC loop-specific pragmas
        clang pragma loop hint directives

Package: libslang2-modules
Description-md5: 1e964ad8c008b4e87762d66b0066a7b5
Description-en: Shared modules for S-Lang language
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains dynamically-loaded modules for S-Lang applications.

Package: libslang2-pic
Description-md5: 6ac39ebfc9448c20f9f8c02ffb8e243b
Description-en: S-Lang programming library, shared library subset kit
 This is used to develop subsets of the S-Lang shared libraries for use
 on custom installation floppies and in embedded systems. Unless you're
 making one of those, you won't need this package.

Package: libspa-0.2-jack
Description-md5: fc78a23fc4195d420469740c7f78d41f
Description-en: libraries for the PipeWire multimedia server - JACK client
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains a plugin to make PipeWire able to connect to a
 JACK server, which will be used for audio playback and recording.

Package: libtgowt-dev
Description-md5: f714456bbc3ef15a6a9a0d897ce83c29
Description-en: telegram related WebRTC fork
 This supporting package contains a reduced fork of WebRTC source code. It is
 primarily needed for build support of video calls in Telegram Desktop. WebRTC
 project, in general, provides applications real-time capabilities that work on
 top of an open standard.

Package: libtinfo5
Description-md5: e4089e57710bd30671fca7351b19ae90
Description-en: shared low-level terminfo library (legacy version)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the legacy version of the shared low-level
 terminfo library.

Package: libtrilinos-amesos-13.2
Description-md5: ecdf604e928f8a2c48753ae3dceaf38f
Description-en: direct sparse solver package - runtime files
 Amesos is the Direct Sparse Solver Package in Trilinos. The goal of Amesos is
 to make AX=B as easy as it sounds, at least for direct methods. Amesos
 provides clean and consistent interfaces to a number of third-party libraries.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-amesos-dev
Description-md5: f8f2acf5ce5bff5b09ccf71a1e54b647
Description-en: direct sparse solver package - development files
 Amesos is the Direct Sparse Solver Package in Trilinos. The goal of Amesos is
 to make AX=B as easy as it sounds, at least for direct methods. Amesos
 provides clean and consistent interfaces to a number of third-party libraries.
 .
 This package provides headers.

Package: libtrilinos-amesos2-13.2
Description-md5: 25ff7db1c75a65dd8b01ec2985ffd52a
Description-en: next generation direct sparse solver package - runtime files
 Amesos2 is a package for solving sparse linear systems using direct solvers.
 It differs from Amesos in that it is templated on the scalar and index types.
 KLU2 is the only native solver.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-amesos2-dev
Description-md5: 39a23ed3f04d52b3ed3fdfc6aea61718
Description-en: next generation direct sparse solver package - development files
 Amesos2 is a package for solving sparse linear systems using direct solvers.
 It differs from Amesos in that it is templated on the scalar and index types.
 KLU2 is the only native solver.
 .
 This package provides headers.

Package: libtrilinos-anasazi-13.2
Description-md5: c8716b04d6c68195db1d18505c6c8cc5
Description-en: large-scale eigenvalue algorithms - runtime files
 Anasazi is an extensible and interoperable framework for large-scale
 eigenvalue algorithms. The motivation for this framework is to provide a
 generic interface to a collection of algorithms for solving large-scale
 eigenvalue problems. Anasazi is interoperable because both the matrix and
 vectors (defining the eigenspace) are considered to be opaque objects -- only
 knowledge of the matrix and vectors via elementary operations is necessary.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-anasazi-dev
Description-md5: c197134c6b9ee41d314b1667af00b418
Description-en: large-scale eigenvalue algorithms - development files
 Anasazi is an extensible and interoperable framework for large-scale
 eigenvalue algorithms. The motivation for this framework is to provide a
 generic interface to a collection of algorithms for solving large-scale
 eigenvalue problems. Anasazi is interoperable because both the matrix and
 vectors (defining the eigenspace) are considered to be opaque objects -- only
 knowledge of the matrix and vectors via elementary operations is necessary.
 .
 This package provides headers.

Package: libtrilinos-aztecoo-13.2
Description-md5: 62bd827b6fb3f1df93d48d5b802a60fd
Description-en: object-oriented interface to the Aztec solver - runtime files
 AztecOO provides an object-oriented interface to the well-known Aztec solver
 library. Furthermore, it allows flexible construction of matrix and vector
 arguments via Epetra matrix and vector classes. Finally, AztecOO provide
 additional functionality not found in Aztec and any future enhancements to the
 Aztec package will be available only through the AztecOO interfaces.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-aztecoo-dev
Description-md5: 24607c09d41bc5654fc7f044deac8dbb
Description-en: object-oriented interface to the Aztec solver - development files
 AztecOO provides an object-oriented interface to the well-known Aztec solver
 library. Furthermore, it allows flexible construction of matrix and vector
 arguments via Epetra matrix and vector classes. Finally, AztecOO provide
 additional functionality not found in Aztec and any future enhancements to the
 Aztec package will be available only through the AztecOO interfaces.
 .
 This package provides headers.

Package: libtrilinos-belos-13.2
Description-md5: a626c1ed63fbc92794142bc07f6bed71
Description-en: iterative linear solvers - runtime files
 Belos provides next-generation iterative linear solvers and a powerful linear
 solver developer framework. This framework includes abstract interfaces to
 linear algebra using traits mechanisms, abstract interfaces to
 orthogonalization, abstract interfaces to iteration kernels, powerful solver
 managers, and a basic linear problem class.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-belos-dev
Description-md5: e0533b482a721888c8c7525207f4a2a8
Description-en: iterative linear solvers - development files
 Belos provides next-generation iterative linear solvers and a powerful linear
 solver developer framework. This framework includes abstract interfaces to
 linear algebra using traits mechanisms, abstract interfaces to
 orthogonalization, abstract interfaces to iteration kernels, powerful solver
 managers, and a basic linear problem class.
 .
 This package provides headers.

Package: libtrilinos-epetra-13.2
Description-md5: b1fb505913c86233acd15a07de1fe65e
Description-en: basis package for linear algebra - runtime files
 Epetra provides the fundamental construction routines and services function
 that are required for serial and parallel linear algebra libraries. Epetra
 provides the underlying foundation for all Trilinos solvers.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-epetra-dev
Description-md5: 9c94591657d85f06e6889021b5a09bf5
Description-en: basis package for linear algebra - development files
 Epetra provides the fundamental construction routines and services function
 that are required for serial and parallel linear algebra libraries. Epetra
 provides the underlying foundation for all Trilinos solvers.
 .
 This package provides headers.

Package: libtrilinos-epetraext-13.2
Description-md5: 262e737ffd9445222a1f58e9454d1064
Description-en: extensions to the Epetra toolkit - runtime files
 EpetraExt provides tools and functions that make it easier to work with
 Epetra.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-epetraext-dev
Description-md5: bd85893c9b3421a8ce761dccebec6bc7
Description-en: extensions to the Epetra toolkit - development files
 EpetraExt provides tools and functions that make it easier to work with
 Epetra.
 .
 This package provides headers.

Package: libtrilinos-galeri-13.2
Description-md5: 30e8a69aca2e319dbcfc0dc5dd684a31
Description-en: generation of distributed linear systems - runtime files
 The Trilinos package Galeri contains a suite of utilities and classes to
 generate a variety of (distributed) linear systems. Galeri's functionalities
 are very close to that of the MATLAB's gallery() function.
 Several well-known finite element and finite difference matrices can be
 generated using only a few simple code lines.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-galeri-dev
Description-md5: c600c80aebfeff2cd907bbeccf18b497
Description-en: generation of distributed linear systems - development files
 The Trilinos package Galeri contains a suite of utilities and classes to
 generate a variety of (distributed) linear systems. Galeri's functionalities
 are very close to that of the MATLAB's gallery() function.
 Several well-known finite element and finite difference matrices can be
 generated using only a few simple code lines.
 .
 This package provides headers.

Package: libtrilinos-ifpack-13.2
Description-md5: 43d4bcb24b48a33134f96791290b0571
Description-en: algebraic preconditioners - runtime files
 IFPACK provides a suite of object-oriented algebraic preconditioners for the
 solution of preconditioned iterative solvers. IFPACK constructors expect an
 Epetra_RowMatrix object for construction. IFPACK is part of the Trilinos
 Solver Project and IFPACK object interact well with other Trilinos classes. In
 particular, IFPACK can be used as a preconditioner for AztecOO.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-ifpack-dev
Description-md5: 9072d7c970f5aeed4b68f4eef97068a7
Description-en: algebraic preconditioners - development files
 IFPACK provides a suite of object-oriented algebraic preconditioners for the
 solution of preconditioned iterative solvers. IFPACK constructors expect an
 Epetra_RowMatrix object for construction. IFPACK is part of the Trilinos
 Solver Project and IFPACK object interact well with other Trilinos classes. In
 particular, IFPACK can be used as a preconditioner for AztecOO.
 .
 This package provides headers.

Package: libtrilinos-ifpack2-13.2
Description-md5: 0fec478c269aa8bcdf3a1c3288f8467a
Description-en: next generation algebraic preconditioners - runtime files
 Ifpack2 provides incomplete factorizations, relaxations, and domain
 decomposition operators for linear algebra objects (sparse matrices,
 operators, and dense vectors and multivectors) provided by the Tpetra package.
 You may use these operators however you wish: for example as preconditioners
 in an iterative solver, or as smoothers for algebraic multigrid.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-ifpack2-dev
Description-md5: b364924c4a6a0739087aa07eab934422
Description-en: next generation algebraic preconditioners - development files
 Ifpack2 provides incomplete factorizations, relaxations, and domain
 decomposition operators for linear algebra objects (sparse matrices,
 operators, and dense vectors and multivectors) provided by the Tpetra package.
 You may use these operators however you wish: for example as preconditioners
 in an iterative solver, or as smoothers for algebraic multigrid.
 .
 This package provides headers.

Package: libtrilinos-intrepid-13.2
Description-md5: 2cb0943c4089f37303ed77429c4cb558
Description-en: compatible discretizations of PDEs - runtime files
 Intrepid is a library of interoperable tools for compatible discretizations of
 Partial Differential Equations (PDEs).  Intrepid is intended primarily for
 application developers who want to reuse large parts of their existing code
 frameworks such as I/O, data structures, assembly routines, etc. while gaining
 access to advanced discretization capabilities provided by Intrepid.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-intrepid-dev
Description-md5: ae5af45401619ed281beb4ca5206c062
Description-en: compatible discretizations of PDEs - development files
 Intrepid is a library of interoperable tools for compatible discretizations of
 Partial Differential Equations (PDEs).  Intrepid is intended primarily for
 application developers who want to reuse large parts of their existing code
 frameworks such as I/O, data structures, assembly routines, etc. while gaining
 access to advanced discretization capabilities provided by Intrepid.
 .
 This package provides headers.

Package: libtrilinos-intrepid2-13.2
Description-md5: f50e9a51c57c2f6bc1c4b6136615dcd8
Description-en: next generation compatible discretizations of PDEs - runtime files
 Intrepid2 is an extension of Intrepid, a library of interoperable tools for
 compatible discretizations of Partial Differential Equations (PDEs). Intrepid2
 utilizes Kokkos dynamic rank views as the default multidimensional array type,
 which enables the use of Intrepid2 on heterogeneous architectures.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-intrepid2-dev
Description-md5: 0acd449f3fcf8b8faa2a0136766d90cc
Description-en: next generation compatible discretizations of PDEs - development files
 Intrepid2 is an extension of Intrepid, a library of interoperable tools for
 compatible discretizations of Partial Differential Equations (PDEs). Intrepid2
 utilizes Kokkos dynamic rank views as the default multidimensional array type,
 which enables the use of Intrepid2 on heterogeneous architectures.
 .
 This package provides headers.

Package: libtrilinos-isorropia-13.2
Description-md5: 759585b2ca72a2d4b925d697e84c37b3
Description-en: partitioning, load balancing, coloring of sparse matrices - runtime files
 Isorropia is a package for combinatorial scientific computing, with focus on
 partitioning and load balancing, but also supports coloring and ordering of
 sparse matrices. Its main purpose is to assist with redistributing objects
 such as matrices and graphs in a parallel execution setting, to allow for more
 efficient computations. Isorropia partitions matrices by rows, and produces
 good maps for Epetra matrices (graphs).
 .
 This package contains the dynamic libraries.

Package: libtrilinos-isorropia-dev
Description-md5: 41004d7e748422d6102b8135e2851fae
Description-en: partitioning, load balancing, coloring of sparse matrices - development files
 Isorropia is a package for combinatorial scientific computing, with focus on
 partitioning and load balancing, but also supports coloring and ordering of
 sparse matrices. Its main purpose is to assist with redistributing objects
 such as matrices and graphs in a parallel execution setting, to allow for more
 efficient computations. Isorropia partitions matrices by rows, and produces
 good maps for Epetra matrices (graphs).
 .
 This package provides headers.

Package: libtrilinos-kokkos-13.2
Description-md5: b16d4305e8001b6f3f9e125266bea0a8
Description-en: Trilinos Kokkos programming model - runtime files
 Kokkos implements a programming model in C++ for writing performance portable
 applications targeting all major HPC platforms. For that purpose it provides
 abstractions for both parallel execution of code and data management.
 Kokkos is designed to target complex node architectures with N-level memory
 hierarchies and multiple types of execution resources. It currently can use
 OpenMP, Pthreads and CUDA as backend programming models.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-kokkos-dev
Description-md5: 7463616d8e9cef7c865cfa168b783178
Description-en: Trilinos Kokkos programming model - development files
 Kokkos implements a programming model in C++ for writing performance portable
 applications targeting all major HPC platforms. For that purpose it provides
 abstractions for both parallel execution of code and data management.
 Kokkos is designed to target complex node architectures with N-level memory
 hierarchies and multiple types of execution resources. It currently can use
 OpenMP, Pthreads and CUDA as backend programming models.
 .
 This package provides headers.

Package: libtrilinos-kokkos-kernels-13.2
Description-md5: 75eaedb213964c7524d00bc1aaf9e78b
Description-en: Kokkos local computational kernels - runtime files
 KokkosKernels implements local computational kernels for linear algebra and
 graph operations, using the Kokkos shared-memory parallel programming model.
 "Local" means not using MPI, or running within a single MPI process without
 knowing about MPI.  "Computational kernels" are coarse-grained operations;
 they take a lot of work and make sense to parallelize inside using Kokkos.
 KokkosKernels can be the building block of a parallel linear algebra library
 like Tpetra that uses MPI and threads for parallelism, or it can be used
 stand-alone in your application.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-kokkos-kernels-dev
Description-md5: b00711f74cacd4dbc89b16b5f3f6641b
Description-en: Kokkos local computational kernels - development files
 KokkosKernels implements local computational kernels for linear algebra and
 graph operations, using the Kokkos shared-memory parallel programming model.
 "Local" means not using MPI, or running within a single MPI process without
 knowing about MPI.  "Computational kernels" are coarse-grained operations;
 they take a lot of work and make sense to parallelize inside using Kokkos.
 KokkosKernels can be the building block of a parallel linear algebra library
 like Tpetra that uses MPI and threads for parallelism, or it can be used
 stand-alone in your application.
 .
 This package provides headers.

Package: libtrilinos-komplex-13.2
Description-md5: 5aed6e50f4f545275681e85aa496dbc4
Description-en: complex linear solver package - runtime files
 Komplex is a complex linear solver package. Solves complex-valued linear
 systems via equivalent real formulations.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-komplex-dev
Description-md5: fc96ccf010c96fde724b5e473fb19aa4
Description-en: complex linear solver package - development files
 Komplex is a complex linear solver package. Solves complex-valued linear
 systems via equivalent real formulations.
 .
 This package provides headers.

Package: libtrilinos-ml-13.2
Description-md5: b88aa6a669e8bb97a7bbb0c5625bc371
Description-en: multigrid preconditioning - runtime files
 ML is Sandia's main multigrid preconditioning package. ML is designed to solve
 large sparse linear systems of equations arising primarily from elliptic PDE
 discretizations. ML is used to define and build multigrid solvers and
 preconditioners, and it contains black-box classes to construct
 highly-scalable smoothed aggregation preconditioners. ML preconditioners have
 been used on thousands of processors for a variety of problems, including the
 incompressible Navier-Stokes equations with heat and mass transfer, linear and
 nonlinear elasticity equations, the Maxwell equations, semiconductor
 equations, and more.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-ml-dev
Description-md5: 95b52fe0b90a53881f62519965435547
Description-en: multigrid preconditioning - development files
 ML is Sandia's main multigrid preconditioning package. ML is designed to solve
 large sparse linear systems of equations arising primarily from elliptic PDE
 discretizations. ML is used to define and build multigrid solvers and
 preconditioners, and it contains black-box classes to construct
 highly-scalable smoothed aggregation preconditioners. ML preconditioners have
 been used on thousands of processors for a variety of problems, including the
 incompressible Navier-Stokes equations with heat and mass transfer, linear and
 nonlinear elasticity equations, the Maxwell equations, semiconductor
 equations, and more.
 .
 This package provides headers.

Package: libtrilinos-moertel-13.2
Description-md5: 0a2ca0759713f843f16e65a32a6af4dc
Description-en: mortar methods package - runtime files
 This package supplies capabilities for nonconforming mesh tying and contact
 formulations in 2 and 3 dimensions using Mortar methods. Mortar methods are a
 type of Lagrange Multiplier constraint that can be used in contact
 formulations and in non-conforming or conforming mesh tying as well as in
 domain decomposition techniques. Originally introduced as a domain
 decomposition method for spectral elements, Mortar methods are used in a large
 class of nonconforming situations such as the surface coupling of different
 physical models, discretization schemes or non-matching triangulations along
 interior interfaces of a domain.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-moertel-dev
Description-md5: 7799f7f1eea042985115e7b6c18fd959
Description-en: mortar methods package - development files
 This package supplies capabilities for nonconforming mesh tying and contact
 formulations in 2 and 3 dimensions using Mortar methods. Mortar methods are a
 type of Lagrange Multiplier constraint that can be used in contact
 formulations and in non-conforming or conforming mesh tying as well as in
 domain decomposition techniques. Originally introduced as a domain
 decomposition method for spectral elements, Mortar methods are used in a large
 class of nonconforming situations such as the surface coupling of different
 physical models, discretization schemes or non-matching triangulations along
 interior interfaces of a domain.
 .
 This package provides headers.

Package: libtrilinos-muelu-13.2
Description-md5: 1b6fe2ab7b4dd2e7cfb06338396aaeac
Description-en: next generation multilevel preconditioner capabilities - runtime files
 MueLu is designed to solve large sparse linear systems of equations arising
 from PDE discretizations. MueLu provides easy-to-use multigrid solvers and
 preconditioners based on smoothed aggregation algorithms. As a multigrid
 framework, MueLu supports the design of highly application specific multigrid
 preconditioners.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-muelu-dev
Description-md5: 9221d98ba564f8f9b614d89f488fd696
Description-en: next generation multilevel preconditioner capabilities - development files
 MueLu is designed to solve large sparse linear systems of equations arising
 from PDE discretizations. MueLu provides easy-to-use multigrid solvers and
 preconditioners based on smoothed aggregation algorithms. As a multigrid
 framework, MueLu supports the design of highly application specific multigrid
 preconditioners.
 .
 This package provides headers.

Package: libtrilinos-nox-13.2
Description-md5: 84147d2c99a7e04b6197c942303b5678
Description-en: robust solution of nonlinear equations - runtime files
 NOX robustly solves and analyzes large-scale systems of nonlinear equations.
 NOX is short for Nonlinear Object-Oriented Solutions, and its objective is to
 enable the robust and efficient solution of the equation: F(x)=0 using
 globalized Newton methods such as line search and trust region methods. NOX is
 designed to work with any linear algebra package and to be easily customized.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-nox-dev
Description-md5: 3be07aaf1ac4c22c689acb481744e879
Description-en: robust solution of nonlinear equations - development files
 NOX robustly solves and analyzes large-scale systems of nonlinear equations.
 NOX is short for Nonlinear Object-Oriented Solutions, and its objective is to
 enable the robust and efficient solution of the equation: F(x)=0 using
 globalized Newton methods such as line search and trust region methods. NOX is
 designed to work with any linear algebra package and to be easily customized.
 .
 This package provides headers.

Package: libtrilinos-pamgen-13.2
Description-md5: 24018a956741af0bdb06d842369e49c6
Description-en: hexahedral and quadrilateral mesh generator - runtime files
 PAMGEN creates hexahedral or quadrilateral (in 2D) finite element meshes of
 simple shapes (cubes and cylinders) in parallel. When linked to an application
 as a library, it allows each process of a parallel simulation to generate its
 finite element domain representation at execution time.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-pamgen-dev
Description-md5: 1f786598522477efc1028205fa8db7fb
Description-en: hexahedral and quadrilateral mesh generator - development files
 PAMGEN creates hexahedral or quadrilateral (in 2D) finite element meshes of
 simple shapes (cubes and cylinders) in parallel. When linked to an application
 as a library, it allows each process of a parallel simulation to generate its
 finite element domain representation at execution time.
 .
 This package provides headers.

Package: libtrilinos-phalanx-13.2
Description-md5: 8d4d86ab36bd7b99e17022143208692b
Description-en: local field evaluation kernel - runtime files
 Phalanx is a local field evaluation kernel specifically designed for general
 partial differential equation solvers. The main goal of Phalanx is to
 decompose a complex problem into a number of simpler problems with managed
 dependencies to support rapid development and extensibility of the PDE code.
 Through the use of template metaprogramming concepts, Phalanx supports
 arbitrary user defined data types and evaluation types. This allows for
 unprecedented flexibility for direct integration with user applications and
 provides extensive support for embedded technology such as automatic
 differentiation for sensitivity analysis and uncertainty quantification.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-phalanx-dev
Description-md5: 4f8febbd813e494837b35ba6c4c1b2ba
Description-en: local field evaluation kernel - development files
 Phalanx is a local field evaluation kernel specifically designed for general
 partial differential equation solvers. The main goal of Phalanx is to
 decompose a complex problem into a number of simpler problems with managed
 dependencies to support rapid development and extensibility of the PDE code.
 Through the use of template metaprogramming concepts, Phalanx supports
 arbitrary user defined data types and evaluation types. This allows for
 unprecedented flexibility for direct integration with user applications and
 provides extensive support for embedded technology such as automatic
 differentiation for sensitivity analysis and uncertainty quantification.
 .
 This package provides headers.

Package: libtrilinos-pike-13.2
Description-md5: 028d242e6fa5a7a55130f06630eef83d
Description-en: physics integration kernels - runtime files
 Pike is a software library for coupling and solving multiphysics applications.
 It provides basic interfaces and utilities for performing code-to-code
 coupling. It provides simple black-box Picard iteration methods for solving the
 coupled system of equations including Jacobi and Gauss-Seidel solvers. The
 Pike library contains no physics and just provides interfaces and utilities for
 coupling codes.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-pike-dev
Description-md5: 49105586c082a4121520a1008dbdb137
Description-en: physics integration kernels - development files
 Pike is a software library for coupling and solving multiphysics applications.
 It provides basic interfaces and utilities for performing code-to-code
 coupling. It provides simple black-box Picard iteration methods for solving the
 coupled system of equations including Jacobi and Gauss-Seidel solvers. The
 Pike library contains no physics and just provides interfaces and utilities for
 coupling codes.
 .
 This package provides headers.

Package: libtrilinos-piro-13.2
Description-md5: 2c5df5f06241cb98823c1f208ac99c84
Description-en: embedded nonlinear analysis package - runtime files
 Piro is the top-level, unifying package of the Embedded Nonlinear Analysis
 Capability area. The main purpose of the package is to provide driver classes
 for the common uses of Trilinos nonlinear analysis tools. These drivers all
 can be constructed similarly, with a ModelEvaluator and a ParameterList, to
 make it simple to switch between different types of analysis. They also all
 inherit from the same base classes (reponse-only model evaluators) so that the
 resulting analysis can in turn driven by non-intrusive analysis routines.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-piro-dev
Description-md5: 5dc71fdbeabb7048ad197e19eeda32cf
Description-en: embedded nonlinear analysis package - development files
 Piro is the top-level, unifying package of the Embedded Nonlinear Analysis
 Capability area. The main purpose of the package is to provide driver classes
 for the common uses of Trilinos nonlinear analysis tools. These drivers all
 can be constructed similarly, with a ModelEvaluator and a ParameterList, to
 make it simple to switch between different types of analysis. They also all
 inherit from the same base classes (reponse-only model evaluators) so that the
 resulting analysis can in turn driven by non-intrusive analysis routines.
 .
 This package provides headers.

Package: libtrilinos-pliris-13.2
Description-md5: 7b1ac89e1e6deb3c6d6742558056d4f0
Description-en: Trilinos dense solvers package - runtime files
 Pliris is an object-oriented interface to a LU solver for dense matrices on
 parallel platforms. These matrices are double precision real matrices
 distributed on a parallel machine.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-pliris-dev
Description-md5: 92cbe80f4e6c3c486ff115b30c139683
Description-en: Trilinos dense solvers package - development files
 Pliris is an object-oriented interface to a LU solver for dense matrices on
 parallel platforms. These matrices are double precision real matrices
 distributed on a parallel machine.
 .
 This package provides headers.

Package: libtrilinos-rol-13.2
Description-md5: bcbc9028cbefb8d1da09705428984a4d
Description-en: rapid optimization library - runtime files
 The Rapid Optimization Library (ROL) is a package for large-scale optimization.
 It is used for the solution of optimal design, optimal control and inverse
 problems in large-scale engineering applications. Other uses include mesh
 optimization and image processing.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-rol-dev
Description-md5: dac6390a334d4f761568374eb76fde57
Description-en: rapid optimization library - development files
 The Rapid Optimization Library (ROL) is a package for large-scale optimization.
 It is used for the solution of optimal design, optimal control and inverse
 problems in large-scale engineering applications. Other uses include mesh
 optimization and image processing.
 .
 This package provides headers.

Package: libtrilinos-rtop-13.2
Description-md5: c7e1a0d26c9ab3d057077e5d2e582efe
Description-en: reductions/transformation operators - runtime files
 RTOp (reduction/transformation operators) provides the basic mechanism for
 implementing vector operations in a flexible and efficient manner.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-rtop-dev
Description-md5: 5490932295cf870f789caf4abe84d7f0
Description-en: reductions/transformation operators - development files
 RTOp (reduction/transformation operators) provides the basic mechanism for
 implementing vector operations in a flexible and efficient manner.
 .
 This package provides headers.

Package: libtrilinos-rythmos-13.2
Description-md5: 55b9da2d6371d462bc1768fade246305
Description-en: Trilinos transient integrator - runtime files
 Rythmos is a transient integrator for ordinary differential equations and
 differential-algebraic equations with support for explicit, implicit, one-step
 and multi-step algorithms. The fundamental design of Rythmos is aimed at
 supporting operator-split algorithms, multi-physics applications, block linear
 algebra, and adjoint integration.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-rythmos-dev
Description-md5: 028d3e7f422154e14737c139853c1193
Description-en: Trilinos transient integrator - development files
 Rythmos is a transient integrator for ordinary differential equations and
 differential-algebraic equations with support for explicit, implicit, one-step
 and multi-step algorithms. The fundamental design of Rythmos is aimed at
 supporting operator-split algorithms, multi-physics applications, block linear
 algebra, and adjoint integration.
 .
 This package provides headers.

Package: libtrilinos-sacado-13.2
Description-md5: e573e2f11ad50b059ceb99385bbb5c23
Description-en: automatic differentiation for C++ applications - runtime files
 Sacado is a set of automatic differentiation tools for C++ applications. It
 provides templated classes for forward, reverse and Taylor mode automatic
 differentiation.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-sacado-dev
Description-md5: 56d0237e5c1b1696541f989564c1f0d9
Description-en: automatic differentiation for C++ applications - development files
 Sacado is a set of automatic differentiation tools for C++ applications. It
 provides templated classes for forward, reverse and Taylor mode automatic
 differentiation.
 .
 This package provides headers.

Package: libtrilinos-shards-13.2
Description-md5: cff1a471a7cb51a5d01b6a6647559b25
Description-en: interoperability tools for PDE solving - runtime files
 The purpose of Shards is to provide a suite of common tools for numerical and
 topological data that facilitate interoperability between typical software
 modules used to solve Partial Differential Equations (PDEs) by finite element,
 finite volume and finite difference methods. Shards comprises of two
 categories of tools: methods to manage and access information about cell
 topologies used in mesh-based methods for PDEs, and methods to work with
 multi-dimensional arrays used to store numerical data in corresponding
 computer codes.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-shards-dev
Description-md5: ee813cac43e8768045ae70c76d7f1866
Description-en: interoperability tools for PDE solving - development files
 The purpose of Shards is to provide a suite of common tools for numerical and
 topological data that facilitate interoperability between typical software
 modules used to solve Partial Differential Equations (PDEs) by finite element,
 finite volume and finite difference methods. Shards comprises of two
 categories of tools: methods to manage and access information about cell
 topologies used in mesh-based methods for PDEs, and methods to work with
 multi-dimensional arrays used to store numerical data in corresponding
 computer codes.
 .
 This package provides headers.

Package: libtrilinos-shylu-13.2
Description-md5: 7f6152a0c3aea1ee1ae965f3a301d521
Description-en: solving sparse linear systems - runtime files
 ShyLU is a package for solving sparse linear systems. It can be used either as
 a preconditioner, or as a solver. Currently, it is recommended as an Ifpack
 preconditioner. ShyLU uses a hybrid direct/iterative approach based on Schur
 complements. The goal is to provide robustness similar to sparse direct
 solvers, but memory usage more similar to preconditioned iterative solvers.
 ShyLU was designed as a node-level solver. It can use both MPI and threads in
 several ways. ShyLU was designed (a) to solve difficult but medium-size
 problems, and (b) to be used as a subdomain solver or smoother for very large
 problems within an iterative scheme. It is a purely algebraic method so can be
 used as a black-box solver. ShyLU has been particularly successful in
 electrical circuit simulation (Xyce).
 .
 This package contains the dynamic libraries.

Package: libtrilinos-shylu-dev
Description-md5: 54d90b1a297502815d17c44f8c375264
Description-en: solving sparse linear systems - development files
 ShyLU is a package for solving sparse linear systems. It can be used either as
 a preconditioner, or as a solver. Currently, it is recommended as an Ifpack
 preconditioner. ShyLU uses a hybrid direct/iterative approach based on Schur
 complements. The goal is to provide robustness similar to sparse direct
 solvers, but memory usage more similar to preconditioned iterative solvers.
 ShyLU was designed as a node-level solver. It can use both MPI and threads in
 several ways. ShyLU was designed (a) to solve difficult but medium-size
 problems, and (b) to be used as a subdomain solver or smoother for very large
 problems within an iterative scheme. It is a purely algebraic method so can be
 used as a black-box solver. ShyLU has been particularly successful in
 electrical circuit simulation (Xyce).
 .
 This package provides headers.

Package: libtrilinos-stokhos-13.2
Description-md5: dd98bcdc88721f7d7fc9bc9bb57188dd
Description-en: Trilinos uncertainty quantification package - runtime files
 Stokhos is a package for intrusive stochastic Galerkin uncertainty
 quantification methods. It provides methods for computing well-known intrusive
 stochastic Galerkin projections such as Polynomial Chaos and Generalized
 Polynomial Chaos, interfaces for forming the resulting nonlinear systems, and
 linear solver methods for solving block stochastic Galerkin linear systems.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-stokhos-dev
Description-md5: ff529238927cc41f9b7e5fcce45137bd
Description-en: Trilinos uncertainty quantification package - development files
 Stokhos is a package for intrusive stochastic Galerkin uncertainty
 quantification methods. It provides methods for computing well-known intrusive
 stochastic Galerkin projections such as Polynomial Chaos and Generalized
 Polynomial Chaos, interfaces for forming the resulting nonlinear systems, and
 linear solver methods for solving block stochastic Galerkin linear systems.
 .
 This package provides headers.

Package: libtrilinos-stratimikos-13.2
Description-md5: 9b9a424ee10589fa507414119216b8bb
Description-en: wrappers for linear solvers and preconditioners - runtime files
 The package Stratimikos contains a unified set of Thyra-based wrappers to
 linear solver and preconditioner capabilities in Trilinos.  The Stratimikos
 package is also a place where unified testing of linear solvers and
 preconditioners can be performed.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-stratimikos-dev
Description-md5: e7900158a91dfe49314fc9ea96eb6ad8
Description-en: wrappers for linear solvers and preconditioners - development files
 The package Stratimikos contains a unified set of Thyra-based wrappers to
 linear solver and preconditioner capabilities in Trilinos.  The Stratimikos
 package is also a place where unified testing of linear solvers and
 preconditioners can be performed.
 .
 This package provides headers.

Package: libtrilinos-teko-13.2
Description-md5: d2659146cd5356db3094f0fba942f099
Description-en: block preconditioners - runtime files
 Teko is a package for development and implementation of block preconditioners.
 This includes support for manipulation and setup of block operators.
 Furthermore tools exist to support decomposition of a fully coupled operator.
 Additionally, facilities that allow the construction of approximate inverse
 operators using the full complement of available preconditioners and solvers
 are available in Teko. Finally, a small number of generic block
 preconditioners has been implemented in Teko, including block Jacobi, and
 block Gauss-Seidel. For the Navier-Stokes equation, Teko has implementations
 of SIMPLE, PCD and LSC. For details on these methods see Stabilization and
 Scalable Block Preconditioning for the Navier-Stokes Equations and the
 references therein.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-teko-dev
Description-md5: 921acfd60d71ef7184635bbf99c3157b
Description-en: block preconditioners - development files
 Teko is a package for development and implementation of block preconditioners.
 This includes support for manipulation and setup of block operators.
 Furthermore tools exist to support decomposition of a fully coupled operator.
 Additionally, facilities that allow the construction of approximate inverse
 operators using the full complement of available preconditioners and solvers
 are available in Teko. Finally, a small number of generic block
 preconditioners has been implemented in Teko, including block Jacobi, and
 block Gauss-Seidel. For the Navier-Stokes equation, Teko has implementations
 of SIMPLE, PCD and LSC. For details on these methods see Stabilization and
 Scalable Block Preconditioning for the Navier-Stokes Equations and the
 references therein.
 .
 This package provides headers.

Package: libtrilinos-teuchos-13.2
Description-md5: 02f6f14f418b4563934bfa0a5f63b3a1
Description-en: common tools for Trilinos - runtime files
 Teuchos provides a suite of common tools for Trilinos for developers to use.
 These tools include BLAS/LAPACK wrappers, smart pointers, parameter lists, XML
 parsers, etc.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-teuchos-dev
Description-md5: dcc5a072b2721884114cb85c671ecc3b
Description-en: common tools for Trilinos - development files
 Teuchos provides a suite of common tools for Trilinos for developers to use.
 These tools include BLAS/LAPACK wrappers, smart pointers, parameter lists, XML
 parsers, etc.
 .
 This package provides headers.

Package: libtrilinos-thyra-13.2
Description-md5: 63514e2c64fc7c346b4900926c0aeacb
Description-en: interoperability layer for numerical software - runtime files
 The Thyra package contains a set of interfaces and supporting code that
 defines basic interoperability mechanisms between different types of numerical
 software. The foundation of all of these interfaces are the mathematical
 concepts of vectors, vector spaces, and linear operators. All other interfaces
 and support software is built on the basic operator/vector interfaces.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-thyra-dev
Description-md5: 8858666565ef8d7dbf22dee6f50a0554
Description-en: interoperability layer for numerical software - development files
 The Thyra package contains a set of interfaces and supporting code that
 defines basic interoperability mechanisms between different types of numerical
 software. The foundation of all of these interfaces are the mathematical
 concepts of vectors, vector spaces, and linear operators. All other interfaces
 and support software is built on the basic operator/vector interfaces.
 .
 This package provides headers.

Package: libtrilinos-tpetra-13.2
Description-md5: 62f003ec14216ff6e3e970700d8cf549
Description-en: templated numerical linear algebra package - runtime files
 Next-generation, templated version of Petra, taking advantage of the newer
 advanced features of C++.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-tpetra-dev
Description-md5: 6cd5b85e2ad9cd2e56cec22fd4411426
Description-en: templated numerical linear algebra package - development files
 Next-generation, templated version of Petra, taking advantage of the newer
 advanced features of C++.
 .
 This package provides headers.

Package: libtrilinos-trilinoscouplings-13.2
Description-md5: 15e0ee09bdc616e68b98c0bbaf4bf8c8
Description-en: combining Trilinos packages - runtime files
 TrilinosCouplings provides a location for multiple Trilinos packages to be
 combined for testing integrated package capabilities.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-trilinoscouplings-dev
Description-md5: 0603f27fba6ce7a863de5d383748309f
Description-en: combining Trilinos packages - development files
 TrilinosCouplings provides a location for multiple Trilinos packages to be
 combined for testing integrated package capabilities.
 .
 This package provides headers.

Package: libtrilinos-trilinosss-13.2
Description-md5: 41f57ad99dc5722a8557c5c10a1c08cd
Description-en: suitesparse with adaptations for Amesos - runtime files
 A suite of sparse matrix algorithms with adaptations for Amesos.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-trilinosss-dev
Description-md5: 3a3fe5ef0103631aaf997506bb243af6
Description-en: suitesparse with adaptations for Amesos - development files
 A suite of sparse matrix algorithms with adaptations for Amesos.
 .
 This package provides headers.

Package: libtrilinos-triutils-13.2
Description-md5: 19e6a6a6ea210a63419368db7e720de6
Description-en: utilities for Trilinos - runtime files
 TriUtils a package of utilities for other Trilinos packages.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-triutils-dev
Description-md5: 5adae80e362e57a0b2f989e3dc0894bf
Description-en: utilities for Trilinos - development files
 TriUtils a package of utilities for other Trilinos packages.
 .
 This package provides headers.

Package: libtrilinos-xpetra-13.2
Description-md5: 69fe700c08df14ddb5bcebd7e24f5108
Description-en: conversion between Epetra and Teuchos objects - runtime files
 Xpetra a lightweight wrapper to both Epetra and Tpetra. The Xpetra syntax
 mirrors that of Tpetra. Xpetra enables algorithm developers to write to a
 single interface but be able to use either Epetra or Tpetra. Xpetra can also be
 introduced into existing code to allow for gradual migration.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-xpetra-dev
Description-md5: e95e00a4a6aba8bd9257424084673d01
Description-en: conversion between Epetra and Teuchos objects - development files
 Xpetra a lightweight wrapper to both Epetra and Tpetra. The Xpetra syntax
 mirrors that of Tpetra. Xpetra enables algorithm developers to write to a
 single interface but be able to use either Epetra or Tpetra. Xpetra can also be
 introduced into existing code to allow for gradual migration.
 .
 This package provides headers.

Package: libtrilinos-zoltan-13.2
Description-md5: 185fbc84a1ace421cb4bdc14dc861ae4
Description-en: parallel dynamic load balancing - runtime files
 Zoltan is a toolkit of parallel services for dynamic, unstructured, and/or
 adaptive simulations. Zoltan provides parallel dynamic load balancing and
 related services for a wide variety of applications, including finite element
 methods, matrix operations, particle methods, and crash simulations. Zoltan
 also provides parallel graph coloring, matrix ordering, unstructured
 communication tools, and distributed data directories.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-zoltan-dev
Description-md5: cc4152717f75cefe235f6db599405f4f
Description-en: parallel dynamic load balancing - development files
 Zoltan is a toolkit of parallel services for dynamic, unstructured, and/or
 adaptive simulations. Zoltan provides parallel dynamic load balancing and
 related services for a wide variety of applications, including finite element
 methods, matrix operations, particle methods, and crash simulations. Zoltan
 also provides parallel graph coloring, matrix ordering, unstructured
 communication tools, and distributed data directories.
 .
 This package provides headers.

Package: libtrilinos-zoltan2-13.2
Description-md5: 8c46c722aa1a58352f3583ccf4195e7b
Description-en: Trilinos next generation load balancing package - runtime files
 Zoltan2 is a package for load balancing and combinatorial scientific
 computing. It may be viewed as a successor to the popular Zoltan and Isorropia
 packages.
 .
 This package contains the dynamic libraries.

Package: libtrilinos-zoltan2-dev
Description-md5: a59bf49e83ee7d261c5db17f7f3667f5
Description-en: Trilinos next generation load balancing package - development files
 Zoltan2 is a package for load balancing and combinatorial scientific
 computing. It may be viewed as a successor to the popular Zoltan and Isorropia
 packages.
 .
 This package provides headers.

Package: libumockdev-dev
Description-md5: e20e1fd5f7c452d037e06ca09da31d81
Description-en: development files and documentation for libumockdev
 umockdev mocks hardware devices for creating unit tests for libraries and
 programs that handle Linux hardware devices.
 .
 This library provides an UMockdevTestbed class for running a program or test
 suite under a test bed with the previously recorded devices loaded.
 .
 Right now this covers sysfs, uevents, basic support for /dev devices, and
 recording/mocking usbdevfs ioctls (for PtP/MTP devices).
 .
 With this you can simulate particular hardware in virtual environments up to
 some degree, without needing any particular privileges or disturbing the whole
 system.
 .
 The library supports gobject-introspection and builds a VAPI, so that you can
 also use it with Python, JavaScript, and other languages which support GI, and
 Vala.
 .
 This package contains the header, development, and documentation files which
 are needed for building umockdev applications.

Package: libumockdev0
Description-md5: ebb621f9941ee1cde03190e72e506f3c
Description-en: hardware mocking testbed for bug reports and regression tests
 umockdev mocks hardware devices for creating unit tests for libraries and
 programs that handle Linux hardware devices.
 .
 This library provides an UMockdevTestbed class for running a program or test
 suite under a test bed with the previously recorded devices loaded.
 .
 Right now this covers sysfs, uevents, basic support for /dev devices, and
 recording/mocking usbdevfs ioctls (for PtP/MTP devices).
 .
 With this you can simulate particular hardware in virtual environments up to
 some degree, without needing any particular privileges or disturbing the whole
 system.
 .
 The library supports gobject-introspection and builds a VAPI, so that you can
 also use it with Python, JavaScript, and other languages which support GI, and
 Vala.

Package: libuninum-dev
Description-md5: 6754fae98acea3485658c5cd129be13f
Description-en: development files for Libuninum library
 Libuninum is a library for converting Unicode strings to numbers and numbers to
 Unicode strings. Standard functions like strtoul, strtod, and sprintf do
 this for numbers written in the usual Western number system using the
 Indo-Arabic numerals, but they do not handle other number systems.
 .
 Libuninum can handle them properly.
 .
 This package contains files needed if you wish to use the libstatgrab
 library in your own programs.

Package: libuninum5
Description-md5: 91b2e69ec53880981cc3ace09563138c
Description-en: library for handling numbers as Unicode strings
 Libuninum is a library for converting Unicode strings to numbers and numbers to
 Unicode strings. Standard functions like strtoul, strtod, and sprintf do
 this for numbers written in the usual Western number system using the
 Indo-Arabic numerals, but they do not handle other number systems.
 .
 Libuninum can handle them properly.

Package: libunoil-java
Description-md5: 9e017c19c2cbf8cab7b83a1ee17e6890
Description-en: transitional package for LibreOffice UNO runtime environment
 LibreOffice is a full-featured office productivity suite that provides
 a near drop-in replacement for Microsoft(R) Office.
 .
 This has now been merged into liblibreoffice-java and this package thus
 can be safely removed once installed.

Package: libunwind-16
Description-md5: 70dd0c847cdef69a0ce9c2191d54b77e
Description-en: production-quality unwinder
 libunwind is a production-quality unwinder, with platform support for DWARF
 unwind info, SjLj, and ARM EHABI.
 .
 The low level libunwind API was designed to work either in-process (aka local)
 or to operate on another process (aka remote), but only the local path has
 been implemented. Remote unwinding remains as future work.

Package: libunwind-16-dev
Description-md5: 70dd0c847cdef69a0ce9c2191d54b77e
Description-en: production-quality unwinder
 libunwind is a production-quality unwinder, with platform support for DWARF
 unwind info, SjLj, and ARM EHABI.
 .
 The low level libunwind API was designed to work either in-process (aka local)
 or to operate on another process (aka remote), but only the local path has
 been implemented. Remote unwinding remains as future work.

Package: libvcflib-dev
Description-md5: f5f6bad47c03ee262f6c421dbfbcefe7
Description-en: C++ library for parsing and manipulating VCF files (development)
 The Variant Call Format (VCF) is a flat-file, tab-delimited textual format
 intended to concisely describe reference-indexed variations between
 individuals. VCF provides a common interchange format for the description of
 variation in individuals and populations of samples, and has become the defacto
 standard reporting format for a wide array of genomic variant detectors.
 .
 vcflib provides methods to manipulate and interpret sequence variation as it
 can be described by VCF. It is both:
 .
  * an API for parsing and operating on records of genomic variation as it can
    be described by the VCF format,
  * and a collection of command-line utilities for executing complex
    manipulations on VCF files.
 .
 This package contains the static library and the header files.

Package: libvcflib-tools
Description-md5: 3c6aa663d50e327a61a903862665a649
Description-en: C++ library for parsing and manipulating VCF files (tools)
 The Variant Call Format (VCF) is a flat-file, tab-delimited textual format
 intended to concisely describe reference-indexed variations between
 individuals. VCF provides a common interchange format for the description of
 variation in individuals and populations of samples, and has become the defacto
 standard reporting format for a wide array of genomic variant detectors.
 .
 vcflib provides methods to manipulate and interpret sequence variation as it
 can be described by VCF. It is both:
 .
  * an API for parsing and operating on records of genomic variation as it can
    be described by the VCF format,
  * and a collection of command-line utilities for executing complex
    manipulations on VCF files.
 .
 This package contains several tools using the library.

Package: libvcflib1
Description-md5: 4a37be6058b4cb297a5550cbccc89a50
Description-en: C++ library for parsing and manipulating VCF files
 The Variant Call Format (VCF) is a flat-file, tab-delimited textual format
 intended to concisely describe reference-indexed variations between
 individuals. VCF provides a common interchange format for the description of
 variation in individuals and populations of samples, and has become the defacto
 standard reporting format for a wide array of genomic variant detectors.
 .
 vcflib provides methods to manipulate and interpret sequence variation as it
 can be described by VCF. It is both:
 .
  * an API for parsing and operating on records of genomic variation as it can
    be described by the VCF format,
  * and a collection of command-line utilities for executing complex
    manipulations on VCF files.

Package: libwayland-egl1-mesa
Description-md5: 635a93bcd1440d16621693fe064c2aa9
Description-en: transitional dummy package
 This is a transitional dummy package, it can be safely removed.

Package: libwine-development
Description-md5: 3db6a8ba0d26a391d504eae7a2076cb6
Description-en: Windows API implementation - library
 Wine is a free MS-Windows API implementation.
 .
 This package provides the Wine library.

Package: libwine-development-dev
Description-md5: 7fb6480e82b394015397cc0a91e50ec9
Description-en: Windows API implementation - development files
 Wine is a free MS-Windows API implementation.
 .
 This package provides Wine's C header files and development libraries.

Package: libwpg-tools
Description-md5: 84698241ee5ccca3e5e20f9db4d1b26e
Description-en: Tools from libwpg for converting WP Graphics to Raw/SVG
 Libwpg is a collection of library and tools to work with graphics in WPG
 (WordPerfect Graphics) format. WPG is the format used among others in Corel
 software, such as WordPerfect(tm) and Presentations(tm).
 .
 This package contains some little programs using libwps to convert
 WordPerfect Graphics into Raw and SVG files.

Package: libzen-dev
Description-md5: fd715c913b6da32e7465db188780786d
Description-en: ZenLib C++ utility library -- development files
 ZenLib is a C++ utility library. It includes classes for handling strings,
 configuration, bit streams, threading, translation, and cross-platform
 operating system functions.
 .
 This package contains the headers required for compiling applications/libraries
 which use this library.

Package: libzen-doc
Description-md5: ea8634da071a42ce8508d04755b10795
Description-en: ZenLib C++ utility library -- documentation
 ZenLib is a C++ utility library. It includes classes for handling strings,
 configuration, bit streams, threading, translation, and cross-platform
 operating system functions.
 .
 This package contains the Doxygen generated API reference for developing
 applications/libraries using this library.

Package: libzen0v5
Description-md5: 44c91cf8a569a195b1bf36947bdf9416
Description-en: ZenLib C++ utility library -- runtime
 ZenLib is a C++ utility library. It includes classes for handling strings,
 configuration, bit streams, threading, translation, and cross-platform
 operating system functions.
 .
 This package contains the shared library needed for running applications which
 use this library.

Package: libzulucrypt-dev
Description-md5: 489f15a8bf3c7a8117ed30dd4ad663f3
Description-en: development files for libzulucrypt-1.2.0
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 This package provides the development files for the
 libzulucrypt library.

Package: libzulucrypt-exe-dev
Description-md5: e4746cd71d29a7714f20605a623becbb
Description-en: development files for the libzulucrypt-exe
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 This package provides the development files for the
 libzulucrypt-exe library.

Package: libzulucrypt-exe1.2.0
Description-md5: 446aecbee3df83322562eaf6bfb362bb
Description-en: provide the main functions of zulucrypt
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 This package provides the shared library, that
 has essential functions for some tools in
 zulucrypt suite.

Package: libzulucrypt-plugins
Description-md5: 70724ad1e79147508e339a0a2d82d342
Description-en: collection of plugins for zulucrypt
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 Collection of plugins that increase the
 functionality of zulucrypt.
 .
 Included plugins are:
  gpg
  hmac
  keydialog-qt
  keykeyfile
  keyring
  steghide
  tomb
  zuluCrypt-testKey

Package: libzulucrypt1.2.0
Description-md5: 9a9cf6cb314e6f5a1b3c22b0c3c76e00
Description-en: provide the functions of zulumount
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 This package provides the shared library, that
 has main functions to zulumount.

Package: libzulucryptpluginmanager-dev
Description-md5: a946fb464b3ca06fdac0e2ee73f0b840
Description-en: development files for libzulucryptpluginmanager
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 This package provides development files for the
 libzulucryptpluginmanager library.

Package: libzulucryptpluginmanager1.0.0
Description-md5: ae2f9c097adb8b4af8d6d871ccb8ef59
Description-en: provides support for plugins
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 This package provides the shared library, that
 have support for plugins and allows the integration
 of plugins with zulucrypt and zulumount.

Package: lighttpd
Description-md5: 3cbd5b2dae1802558158d8c2aae494ab
Description-en: fast webserver with minimal memory footprint
 lighttpd is a small webserver and fast webserver developed with
 security in mind and a lot of features.
 It has support for
   * CGI, FastCGI and SSI
   * virtual hosts
   * URL rewriting
   * authentication (plain files, htpasswd, LDAP)
   * transparent content compression
   * conditional configuration
   * HTTP proxying
 and configuration is straight-forward and easy.

Package: lighttpd-doc
Description-md5: 71123b17b9134699e9fdc68a1dc47ca8
Description-en: documentation for lighttpd
 lighttpd is a small webserver and fast webserver developed with
 security in mind and a lot of features.
 .
 This package contains documentation for lighttpd.

Package: lighttpd-mod-authn-gssapi
Description-md5: b4223412d16ad8cd37775485df76d00e
Description-en: GSSAPI authentication module for lighttpd
 This package contains the authn_gssapi module for lighttpd. With
 this module, it is possible to perform GSSAPI authentication.

Package: lighttpd-mod-authn-pam
Description-md5: 7401ef4cca313be6d882b4add329ae92
Description-en: PAM authentication module for lighttpd
 This package contains the authn_pam module for lighttpd. With this module, it
 is possible to perform authentication using PAM.

Package: lighttpd-mod-authn-sasl
Description-md5: d3449f2f70a74c086b093764fe6c9043
Description-en: SASL authentication module for lighttpd
 This package contains the authn_sasl module for lighttpd. With this module, it
 is possible to perform authentication using SASL.

Package: lighttpd-mod-deflate
Description-md5: 30a8855db36328d73f026c9f2f15ed34
Description-en: HTTP response compression module for lighttpd
 This package contains the deflate module for lighttpd. With this module, it is
 possible compress HTTP responses using zlib, brotli, or zstd if supported by
 the client.

Package: lighttpd-mod-gnutls
Description-md5: 6287f63ce2c94f6c5371c50d05a9b223
Description-en: TLS support using GnuTLS module for lighttpd
 This package contains the gnutls module for lighttpd. With this module,
 it is possible serve https:// URLs.  GnuTLS is an alternative to OpenSSL.

Package: lighttpd-mod-maxminddb
Description-md5: 561b4f3fdade57e37bedbe4c997ce233
Description-en: GeoIP2 info module for lighttpd
 This package contains the maxminddb module for lighttpd. With
 this module, it is possible to distinguish users based on the location
 using a GeoIP2 database.

Package: lighttpd-mod-mbedtls
Description-md5: 0652ebdbc541c91c6fbd18c9393770ee
Description-en: TLS support using mbedTLS module for lighttpd
 This package contains the mbedtls module for lighttpd. With this module,
 it is possible serve https:// URLs.  Aimed at embedded systems, mbedTLS
 uses less memory than OpenSSL, though is slightly slower than OpenSSL.

Package: lighttpd-mod-nss
Description-md5: 28f3eceeab568dafbcabb92ced8ba6e3
Description-en: TLS support using NSS crypto module for lighttpd
 This package contains the nss module for lighttpd. With this module,
 it is possible serve https:// URLs.  NSS is an alternative to OpenSSL.

Package: lighttpd-mod-openssl
Description-md5: c6623bb6ca744ccf80ade19e72baf918
Description-en: TLS support using OpenSSL module for lighttpd
 This package contains the openssl module for lighttpd. With this module, it is
 possible serve https:// URLs.

Package: lighttpd-mod-vhostdb-pgsql
Description-md5: b593eb5f5e091b915eff282b56159819
Description-en: PostgreSQL-based virtual host configuration module for lighttpd
 This package contains the vhostdb_pgsql module for lighttpd. With this module,
 it is possible to write the configuration for virtual hosts into a PostgreSQL
 table instead of including it in the lighttpd configuration file.

Package: lighttpd-mod-webdav
Description-md5: 50e71fca16a2374627879656f6a14337
Description-en: WebDAV module for lighttpd
 The WebDAV module is an implementation of RFC 4918.
 .
 Currently supports:
  GET
  POST
  HEAD
  PROPFIND
  PROPPATCH
  OPTIONS
  MKCOL
  COPY
  MOVE
  DELETE
  PUT
  LOCK
  UNLOCK

Package: lighttpd-mod-wolfssl
Description-md5: b57dad97e5cca36c3a9c6283181df241
Description-en: TLS support using wolfSSL module for lighttpd
 This package contains the wolfssl module for lighttpd. With this module,
 it is possible serve https:// URLs.  Aimed at embedded systems, wolfSSL
 uses less memory than OpenSSL, though is slightly slower than OpenSSL.

Package: lighttpd-modules-dbi
Description-md5: 4cd8984307699480039a82d4bd3028cd
Description-en: DBI-based modules for lighttpd
 This package contains the following modules:
  * mod_authn_dbi: DBI-based authentication
    mod_authn_dbi performs authentication against a database server
    via DBI interface.
  * mod_vhostdb_dbi: DBI-based virtual host configuration
    mod_vhostdb_dbi enables writing the configuration for virtual hosts
    into a database table instead of including it in the lighttpd
    configuration file.
 .
 Do not depend on this package. Depend on the provided lighttpd-mod-*
 packages instead.

Package: lighttpd-modules-ldap
Description-md5: ccab7512c20ac6dd2f055dc6171e541e
Description-en: LDAP-based modules for lighttpd
 This package contains the following modules:
  * mod_authn_ldap: With this module, it is possible to perform
    authentication against an LDAP server.
  * mod_vhostdb_ldap: Database backend module for using LDAP as
    a source for virtual host configuration using mod_vhostdb.
 .
 Do not depend on this package. Depend on the provided lighttpd-mod-*
 packages instead.

Package: lighttpd-modules-lua
Description-md5: 6da7f32d5e2d0e0f8330d329063c526e
Description-en: LUA-based modules for lighttpd
 This package contains the following modules:
  * mod_magnet: control the request handling module for lighttpd
    mod_magnet can attract a request in several stages in the request-handling.
    either at the same level as mod_rewrite, before any parsing of the URL is
    done or at a later stage, when the doc-root is known and the physical-path
    is already setup.
 .
 Do not depend on this package. Depend on the provided lighttpd-mod-*
 packages instead.

Package: lighttpd-modules-mysql
Description-md5: 6c76038db76e343a9cd71837c369a03f
Description-en: MySQL-based modules for lighttpd
 This package contains the following modules:
  * mod_vhostdb_mysql: Database backend module for using MySQL as
    a source for virtual host configuration using mod_vhostdb.
 .
 Do not depend on this package. Depend on the provided lighttpd-mod-*
 packages instead.

Package: lld-15
Description-md5: 39b52f07f105b329dd7852cce89ebb7d
Description-en: LLVM-based linker
 LLD is a new, high-performance linker. It is built as a set of reusable
 components which highly leverage existing libraries in the larger LLVM
 Project.

Package: lld-16
Description-md5: 39b52f07f105b329dd7852cce89ebb7d
Description-en: LLVM-based linker
 LLD is a new, high-performance linker. It is built as a set of reusable
 components which highly leverage existing libraries in the larger LLVM
 Project.

Package: lldb-15
Description-md5: 45d52d0209cd7953d2f2bc4d1a99170f
Description-en: Next generation, high-performance debugger
 LLDB is a next generation, high-performance debugger. It is built as a set of
 reusable components which highly leverage existing libraries in the larger LLVM
 Project, such as the Clang expression parser and LLVM disassembler.

Package: lldb-16
Description-md5: 45d52d0209cd7953d2f2bc4d1a99170f
Description-en: Next generation, high-performance debugger
 LLDB is a next generation, high-performance debugger. It is built as a set of
 reusable components which highly leverage existing libraries in the larger LLVM
 Project, such as the Clang expression parser and LLVM disassembler.

Package: llvm-15
Description-md5: 07d463911771b9679a5f0131f40992d4
Description-en: Modular compiler and toolchain technologies
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 The strengths of the LLVM infrastructure are its extremely
 simple design (which makes it easy to understand and use),
 source-language independence, powerful mid-level optimizer, automated
 compiler debugging support, extensibility, and its stability and
 reliability. LLVM is currently being used to host a wide variety of
 academic research projects and commercial projects. LLVM includes C
 and C++ front-ends, a front-end for a Forth-like language (Stacker),
 a young scheme front-end, and Java support is in development. LLVM can
 generate code for X96, SparcV10, PowerPC or many other architectures.

Package: llvm-15-dev
Description-md5: 29f654aa391c01f742a2023c872d7a49
Description-en: Modular compiler and toolchain technologies, libraries and headers
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package provides the libraries and headers to develop applications
 using llvm.

Package: llvm-15-doc
Description-md5: 19896d0a63f9911e3a7a7b85ecfac407
Description-en: Modular compiler and toolchain technologies, documentation
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package contains all documentation (extensive).

Package: llvm-15-examples
Description-md5: 61fee537b751bf39ce1ac5bf27ca3806
Description-en: Modular compiler and toolchain technologies, examples
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package contains examples for using LLVM, both in developing
 extensions to LLVM and in using it to compile code.

Package: llvm-15-linker-tools
Description-md5: 34d6480db2d150315f7bca6065772d03
Description-en: Modular compiler and toolchain technologies - Plugins
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVMgold and LLVMPolly linker plugins.

Package: llvm-15-runtime
Description-md5: a2e425ebfc2fcd56b539f44a28559b4a
Description-en: Modular compiler and toolchain technologies, IR interpreter
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package provides the minimal required to execute programs in LLVM
 format.

Package: llvm-15-tools
Description-md5: 709eba32627c3c079585c05fc5963fe8
Description-en: Modular compiler and toolchain technologies, tools
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package provides tools for testing.

Package: llvm-16
Description-md5: 07d463911771b9679a5f0131f40992d4
Description-en: Modular compiler and toolchain technologies
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 The strengths of the LLVM infrastructure are its extremely
 simple design (which makes it easy to understand and use),
 source-language independence, powerful mid-level optimizer, automated
 compiler debugging support, extensibility, and its stability and
 reliability. LLVM is currently being used to host a wide variety of
 academic research projects and commercial projects. LLVM includes C
 and C++ front-ends, a front-end for a Forth-like language (Stacker),
 a young scheme front-end, and Java support is in development. LLVM can
 generate code for X96, SparcV10, PowerPC or many other architectures.

Package: llvm-16-dev
Description-md5: 29f654aa391c01f742a2023c872d7a49
Description-en: Modular compiler and toolchain technologies, libraries and headers
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package provides the libraries and headers to develop applications
 using llvm.

Package: llvm-16-doc
Description-md5: 19896d0a63f9911e3a7a7b85ecfac407
Description-en: Modular compiler and toolchain technologies, documentation
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package contains all documentation (extensive).

Package: llvm-16-examples
Description-md5: 61fee537b751bf39ce1ac5bf27ca3806
Description-en: Modular compiler and toolchain technologies, examples
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package contains examples for using LLVM, both in developing
 extensions to LLVM and in using it to compile code.

Package: llvm-16-linker-tools
Description-md5: 34d6480db2d150315f7bca6065772d03
Description-en: Modular compiler and toolchain technologies - Plugins
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVMgold and LLVMPolly linker plugins.

Package: llvm-16-runtime
Description-md5: a2e425ebfc2fcd56b539f44a28559b4a
Description-en: Modular compiler and toolchain technologies, IR interpreter
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package provides the minimal required to execute programs in LLVM
 format.

Package: llvm-16-tools
Description-md5: 709eba32627c3c079585c05fc5963fe8
Description-en: Modular compiler and toolchain technologies, tools
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 LLVM uses a single, language-independent virtual instruction set both
 as an offline code representation (to communicate code between
 compiler phases and to run-time systems) and as the compiler internal
 representation (to analyze and transform programs). This persistent
 code representation allows a common set of sophisticated compiler
 techniques to be applied at compile-time, link-time, install-time,
 run-time, or "idle-time" (between program runs).
 .
 This package provides tools for testing.

Package: lua-resty-core
Description-md5: 233f138a7d6e6c22ddd35f302d972b98
Description-en: New FFI-based Lua API for NGINX Lua module
 This pure Lua library reimplements part of the ngx_lua module's Nginx API
 for Lua with LuaJIT FFI and installs the new FFI-based Lua API
 into the ngx.* and ndk.* namespaces used by the ngx_lua module. In addition,
 this Lua library implements any significant new Lua APIs of the ngx_lua module
 as proper Lua modules, like ngx.semaphore and ngx.balancer. The FFI-based
 Lua API can work with LuaJIT's JIT compiler. ngx_lua's default API is based on
 the standard Lua C API, which will never be JIT compiled and the user Lua code
 is always interpreted (slowly).

Package: mariadb-client
Description-md5: c4a333065109cf38e8044e5c13108dc3
Description-en: MariaDB database client (metapackage depending on the latest version)
 This is an empty package that depends on the current "best" version of
 mariadb-client (currently mariadb-client-10.6), as determined by the MariaDB
 maintainers.  Install this package if in doubt about which MariaDB version
 you want, as this is the one considered to be in the best shape.

Package: mariadb-client-10.6
Description-md5: 82697f9416e5e5d0a4e7331c2c735591
Description-en: MariaDB database client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client binaries and the additional tools
 innotop and mariadb-report (mysqlreport).

Package: mariadb-client-core-10.6
Description-md5: 2862a38a5ead2e1df7366bf661e03278
Description-en: MariaDB database core client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core client files, as used by Akonadi.

Package: mariadb-common
Description-md5: b0c32a0541f8699ec53307dabf7f987b
Description-en: MariaDB common configuration files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes configuration files common to all MariaDB programs.

Package: mariadb-server
Description-md5: 810926b6e0e35edd4901d8603857b214
Description-en: MariaDB database server (metapackage depending on the latest version)
 This is an empty package that depends on the current "best" version of
 mariadb-server (currently mariadb-server-10.6), as determined by the MariaDB
 maintainers. Install this package if in doubt about which MariaDB
 version you need. That will install the version recommended by the
 package maintainers.
 .
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.

Package: mariadb-server-10.6
Description-md5: ae76dbcde4bf3e79b8228e6dad967834
Description-en: MariaDB database server binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the server binaries.

Package: mariadb-server-core-10.6
Description-md5: a01f76260dfbedfdfbfcd8ff440b8a4c
Description-en: MariaDB database core server files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core server files, as used by Akonadi.

Package: mariadb-test-data
Description-md5: 4e2584329df41bfe2241de957d88c44a
Description-en: MariaDB database regression test suite - data files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package has the architecture independent data files for the test suite.

Package: maxima
Description-md5: a893a8f17245868a395fc5e31ea49aa5
Description-en: Computer algebra system -- base system
 Maxima is a fully symbolic computation program.  It is full featured
 doing symbolic manipulation of polynomials, matrices, rational
 functions, integration, Todd-coxeter methods for finite group
 analysis, graphing, multiple precision floating point computation.
 It has a symbolic source level debugger for maxima code.  Maxima is
 based on the original Macsyma developed at MIT in the 1970s.  It is
 quite reliable, and has good garbage collection, and no memory leaks.
 It comes with hundreds of self tests.
 .
 This package contains the main executables and base system files.

Package: maxima-doc
Description-md5: 8c9a5773f96e544e207d2a5e77bbe247
Description-en: Computer algebra system -- documentation
 Maxima is a fully symbolic computation program.  It is full featured
 doing symbolic manipulation of polynomials, matrices, rational
 functions, integration, Todd-coxeter methods for finite group
 analysis, graphing, multiple precision floating point computation.
 It has a symbolic source level debugger for maxima code.  Maxima is
 based on the original Macsyma developed at MIT in the 1970s.  It is
 quite reliable, and has good garbage collection, and no memory leaks.
 It comes with hundreds of self tests.
 .
 This package contains most of the documentation.

Package: maxima-emacs
Description-md5: 97f2cd7a6f54bf76ae929a9db126bb3f
Description-en: Computer algebra system -- emacs interface
 Maxima is a fully symbolic computation program.  It is full featured
 doing symbolic manipulation of polynomials, matrices, rational
 functions, integration, Todd-coxeter methods for finite group
 analysis, graphing, multiple precision floating point computation.
 It has a symbolic source level debugger for maxima code.  Maxima is
 based on the original Macsyma developed at MIT in the 1970s.  It is
 quite reliable, and has good garbage collection, and no memory leaks.
 It comes with hundreds of self tests.
 .
 This package contains a tradition emacs interface, together with a
 newer imaxima interface supporting inline imaging and HTML export
 under a specialized imath mode.

Package: maxima-share
Description-md5: 10025b2a7fd84792c7aa21066f9874b0
Description-en: Computer algebra system -- extra code
 Maxima is a fully symbolic computation program.  It is full featured
 doing symbolic manipulation of polynomials, matrices, rational
 functions, integration, Todd-coxeter methods for finite group
 analysis, graphing, multiple precision floating point computation.
 It has a symbolic source level debugger for maxima code.  Maxima is
 based on the original Macsyma developed at MIT in the 1970s.  It is
 quite reliable, and has good garbage collection, and no memory leaks.
 It comes with hundreds of self tests.
 .
 This package contains a set of contributed routines and add-on
 packages.

Package: maxima-src
Description-md5: 70f88d0896858f9e362ad270cbbfc8c6
Description-en: Computer algebra system -- source code
 Maxima is a fully symbolic computation program.  It is full featured
 doing symbolic manipulation of polynomials, matrices, rational
 functions, integration, Todd-coxeter methods for finite group
 analysis, graphing, multiple precision floating point computation.
 It has a symbolic source level debugger for maxima code.  Maxima is
 based on the original Macsyma developed at MIT in the 1970s.  It is
 quite reliable, and has good garbage collection, and no memory leaks.
 It comes with hundreds of self tests.
 .
 This package contains the lisp source code.

Package: maxima-test
Description-md5: 4eff62415cb0cab4865c1d9a27afcbb2
Description-en: Computer algebra system -- test suite
 Maxima is a fully symbolic computation program.  It is full featured
 doing symbolic manipulation of polynomials, matrices, rational
 functions, integration, Todd-coxeter methods for finite group
 analysis, graphing, multiple precision floating point computation.
 It has a symbolic source level debugger for maxima code.  Maxima is
 based on the original Macsyma developed at MIT in the 1970s.  It is
 quite reliable, and has good garbage collection, and no memory leaks.
 It comes with hundreds of self tests.
 .
 This package contains a build integrity test suite.

Package: mediaconch
Description-md5: 02dde1eaf9f8a0168611b4c2e9ab363c
Description-en: implementation and policy checker, reporter and fixer for media files
 MediaConch is an extensible, open source software project consisting of an
 implementation checker, policy checker, reporter, and fixer that targets
 preservation-level audiovisual files (specifically Matroska, Linear Pulse Code
 Modulation (LPCM) and FF Video Codec 1 (FFV1)) for use in memory institutions,
 providing detailed and batch-level conformance checking via an adaptable and
 flexible application program interface accessible by the command line, a
 graphical user interface, or a web-based shell.
 .
 This package contains the command-line utiltiy.

Package: mediaconch-gui
Description-md5: 5dcf3746c799a717b8a9e9e5c1bf9e93
Description-en: implementation and policy checker, reporter and fixer for media files
 MediaConch is an extensible, open source software project consisting of an
 implementation checker, policy checker, reporter, and fixer that targets
 preservation-level audiovisual files (specifically Matroska, Linear Pulse Code
 Modulation (LPCM) and FF Video Codec 1 (FFV1)) for use in memory institutions,
 providing detailed and batch-level conformance checking via an adaptable and
 flexible application program interface accessible by the command line, a
 graphical user interface, or a web-based shell.
 .
 This package contains the GUI application.

Package: mesa-drm-shim
Description-md5: 7549bc14717565f3f05e63b49025249d
Description-en: DRM shim libraries
 This package provides drm-shim libraries which can be used for testing DRM drivers when
 none exists on the host

Package: mesa-opencl-icd
Description-md5: 10fe1749fa432fa001ccca2f3b268b84
Description-en: free implementation of the OpenCL API -- ICD runtime
 This package contains the mesa implementation of the OpenCL (Open Compute
 Language) library, which is intended for use with an ICD loader. OpenCL
 provides a standardized interface for computational analysis on graphical
 processing units.

Package: mesa-va-drivers
Description-md5: c89bbf6e4f80a47acafd5858be814f3c
Description-en: Mesa VA-API video acceleration drivers
 These libraries provide the Video Acceleration API (VA-API) for Unix.
 They provide accelerated video playback (incl. H.264) and video
 post-processing for the supported graphics cards.
 .
 This package enables support for VA-API for some gallium drivers.

Package: minify
Description-md5: fd4d806fa5b8a6335792a2ef03c278f2
Description-en: CLI implementation of the Go minify library package
 /usr/bin/minify is a CLI implementation of the github.com/tdewolff/minify
 Go library package.
 .
 It provides HTML5, CSS3, JS, JSON, SVG and XML minifiers.
 .
 Minification is the process of removing bytes from a file (such as
 whitespace) without changing its output and therefore shrinking
 its size and speeding up transmission over the Internet and possibly
 parsing.  The implemented minifiers are high performance and streaming,
 which implies O(n).

Package: mksh
Description-md5: 4931f730b48566d2590b67efc22e6b63
Description-en: MirBSD Korn Shell
 mksh is the successor of the Public Domain Korn shell (pdksh),
 a Bourne/POSIX compatible shell which is largely similar to the
 original AT&T Korn Shell (ksh88/ksh93).
 It includes bug fixes and feature improvements, in order to produce a
 modern, robust shell good for interactive and especially script use.
 mksh has UTF-8 support (in string operations and the Emacs editing
 mode). The code has been cleaned up and simplified, bugs fixed,
 standards compliance added, and several enhancements (for extended
 compatibility to other modern shells, as well as a couple of its
 own) are available.
 This shell is Debian Policy 10.4 compliant and works as /bin/sh on
 Debian systems (use the /bin/lksh executable) and is a good rescue
 and initrd shell (consider the /bin/mksh-static executable).
 .
 The mksh binary is a complete, full-featured shell. It provides a
 “consistent across all platforms” guarantee, using 32-bit integers
 for arithmetics, possibly deviating from POSIX.
 .
 The mksh-static binary is a version of mksh, linked against klibc,
 musl, or dietlibc (if they exist for that Debian architecture and
 are usable) and optimised for small code size, for example for use
 on initrd or initramfs images, installation or rescue systems.
 Except for omitting some features to be smaller, it is similar to
 the mksh binary otherwise. Note the exact feature set may differ
 depending on which C library was used to compile it.
 .
 The lksh binary is a script shell based on mksh intended to run old
 ksh88 and pdksh scripts, but not for interactive use. When used as
 /bin/sh it follows POSIX most closely, including use of the host’s
 “long” C data type for arithmetics. It also contains kludges so it
 can run as /bin/sh on Debian beyond what Policy dictates, to work
 around bugs in maintainer scripts and LSB init scripts shipped by
 many packages, such as including a rudimentary printf(1) builtin,
 permitting a shell function to be named stop overriding the default
 alias, more loose interpretation of shell extglobs, etc.
 .
 A sample ~/.mkshrc is included in /usr/share/doc/mksh/examples and
 provided as /etc/mkshrc conffile, which is sourced by another file
 /etc/skel/.mkshrc users are recommended to copy into their home.

Package: mlir-15-tools
Description-md5: d0b5aeb3d29bd335ae224dda484fdc7a
Description-en: Multi-Level Intermediate Representation tools
 Novel approach to building reusable and extensible compiler infrastructure.
 MLIR aims to address software fragmentation, improve compilation for
 heterogeneous hardware, significantly reduce the cost of building domain
 specific compilers, and aid in connecting existing compilers together.
 .
 This package provides tools.

Package: mlir-16-tools
Description-md5: d0b5aeb3d29bd335ae224dda484fdc7a
Description-en: Multi-Level Intermediate Representation tools
 Novel approach to building reusable and extensible compiler infrastructure.
 MLIR aims to address software fragmentation, improve compilation for
 heterogeneous hardware, significantly reduce the cost of building domain
 specific compilers, and aid in connecting existing compilers together.
 .
 This package provides tools.

Package: mmdebstrap
Description-md5: 144656cff7b9832b807bfea23f064490
Description-en: create a Debian chroot
 Downloads, unpacks and installs Debian packages to either directly create a
 directory which can be chrooted into, or a tarball of it. In contrast to
 debootstrap it uses apt, supports more than one mirror, automatically uses
 security and updates mirrors for Debian stable chroots, is 3-6 times faster,
 produces smaller output by removing unnecessary cruft, is bit-by-bit
 reproducible if $SOURCE_DATE_EPOCH is set, allows unprivileged operation using
 Linux user namespaces or fakechroot and can setup foreign architecture
 chroots using qemu-user.

Package: msmtp
Description-md5: cb672817175b0fe547d71313e35a93e0
Description-en: light SMTP client with support for server profiles
 msmtp is an SMTP client that can be used to send mails from Mutt and probably
 other MUAs (mail user agents). It forwards mails to an SMTP server (for
 example at a free mail provider), which takes care of the final delivery.
 Using profiles, it can be easily configured to use different SMTP servers
 with different configurations, which makes it ideal for mobile clients.

Package: msmtp-mta
Description-md5: 92a76bed20d7385fc7d78445076c37fc
Description-en: light SMTP client with support for server profiles - the regular MTA
 msmtp is an SMTP client that can be used to send mails from Mutt and probably
 other MUAs (mail user agents). It forwards mails to an SMTP server (for
 example at a free mail provider), which takes care of the final delivery.
 Using profiles, it can be easily configured to use different SMTP servers
 with different configurations, which makes it ideal for mobile clients.
 .
 This package is compiled with SASL and TLS/SSL support.
 .
 This package provides the regular MTA program.

Package: mutter
Description-md5: e1aaf47f1a0045c06fca32ec80a0a883
Description-en: Example window manager using GNOME's window manager library
 Mutter is a Wayland display server and X11 window manager and
 compositor library. It contains functionality related to, among other
 things, window management, window compositing, focus tracking, workspace
 management, keybindings and monitor configuration.
 .
 Internally it uses a fork of Cogl, a hardware acceleration abstraction
 library used to simplify usage of OpenGL pipelines, as well as a fork
 of Clutter, a scene graph and user interface toolkit.
 .
 This package contains the mutter executable. It can be used as a
 standalone window manager, but is primarily intended for debugging.

Package: mutter-12-tests
Description-md5: 28acabf81cb16f554020f24fceba63a1
Description-en: Tests for GNOME's window manager library
 Mutter is a Wayland display server and X11 window manager and
 compositor library. It contains functionality related to, among other
 things, window management, window compositing, focus tracking, workspace
 management, keybindings and monitor configuration.
 .
 Internally it uses a fork of Cogl, a hardware acceleration abstraction
 library used to simplify usage of OpenGL pipelines, as well as a fork
 of Clutter, a scene graph and user interface toolkit.
 .
 This package contains test programs, designed to be run as part of a
 regression testsuite.

Package: netatalk
Description-md5: e62dc5d47a8976340a23e15627b92aa9
Description-en: Apple Filing Protocol service
 Netatalk is an implementation of the Apple Filing Protocol (AFP),
 for offering file service (mainly) to macOS clients.
 .
 Compared to the Windows-native SMB protocol
 (which is also supported on macOS),
 the Macintosh-native AFP protocol is accessible from a different network,
 can be simpler to setup and faster for some operations
 (e.g. server-to-server copying),
 and some features (e.g. the backup service Time Machine)
 may work more reliably than over SMB.
 .
 This package contains all daemon and utility programs
 as well as Netatalk's libraries.

Package: node-jest-debbundle
Description-md5: 0eff6dab45f4d7ce09f849dcc9ae8d14
Description-en: various ittle Node.js modules needed by jest
 This package provides:
  * astral-regex
  * babel-preset-jest
  * babel-plugin-jest-hoist
  * babel-preset-moxy.
  * char-regex
  * dedent
  * import-local
  * is-ci
  * p-each-series
  * p-reduce
  * repl
  * string-length
  * terminal-link
  * throat

Package: node-jest-worker
Description-md5: d8992d5e5577e2b8ed4f6b7275eed07e
Description-en: Nodejs module for executing heavy tasks under forked processes in parallel
 jest-worker provides a `Promise` based interface, minimum overhead and
 bound workers.
 .
 The module works by providing an absolute path of the module to be loaded in
 all forked processes. Files relative to a node module are also accepted. All
 methods are exposed on the parent process as promises, so they can be
 `await`'ed. Child (worker) methods can either be synchronous or asynchronous.
 .
 The module also implements support for bound workers. Binding a worker means
 that, based on certain parameters, the same task will always be executed by
 the same worker. The way bound workers work is by using the returned string
 of the `computeWorkerKey` method. If the string was used before for a task,
 the call will be queued to the related worker that processed the task earlier;
 if not, it will be executed by the first available worker, then sticked to the
 worker that executed it; so the next time it will be processed by the same
 worker. If you have no preference on the worker executing the task, but you
 have defined a `computeWorkerKey` method because you want _some_ of the tasks
 to be sticked, you can return `null` from it.

Package: node-juggle-resize-observer
Description-md5: d222480e16ae9a5c81a9267cd2d98336
Description-en: Minimal JavaScript library which polyfills the ResizeObserver API
 @juggle/resize-observer provides a minimal library which polyfills the
 ResizeObserver API and is entirely based on the latest Draft Specification.
 .
 It immediately detects when an element resizes and provides accurate sizing
 information back to the handler.

Package: node-openpgp-asmcrypto.js
Description-md5: d92db55d394fd59f848525ac62c75237
Description-en: Javascript Cryptographic library with performance in mind
 Asmcrypto is a javascript implementation of popular cryptographic utilities
 with performance in mind.

Package: node-prosemirror-transform
Description-md5: e51c96ddd8549fa5c71d1648dca08116
Description-en: ProseMirror document transformations
 This is a core module of ProseMirror. ProseMirror is a well-behaved rich
 semantic content editor based on contentEditable, with support for
 collaborative editing and custom document schemas. This module implements
 document transforms, which are used by the editor to treat changes as
 first-class values, which can be saved, shared, and reasoned about.
 .
 Node.js is an event-based server-side JavaScript engine.

Package: node-react-paginate
Description-md5: baa7de0a6910f90b5a44aa101476ecf4
Description-en: ReactJS component to render a pagination
 node-react-paginate provides a simple component to display long list
 using pagination.

Package: node-whatwg-fetch
Description-md5: ad17748a98290e8237e51f1a6e58a180
Description-en: window.fetch JavaScript polyfill
 The fetch() function is a Promise-based mechanism for programmatically making
 web requests in the browser. This project is a polyfill that implements a
 subset of the standard Fetch specification, enough to make fetch a viable
 replacement for most uses of XMLHttpRequest in traditional web applications.
 .
 Node.js is an event-based server-side JavaScript engine.

Package: node-xml2js
Description-md5: c810ff075523ed26154474171c526588
Description-en: simple XML to JavaScript object converter - Node.js module
 xml2js parses XML using node-sax and converts it to a plain JavaScript
 object.
 .
 Node.js is an event-based server-side javascript engine.

Package: node-yaml
Description-md5: cb55a77cd1ff80c2fcbd6d75d0af11db
Description-en: Nodejs parser and stringifier for YAML standard
 yaml is a JavaScript parser and stringifier for YAML, a human friendly data
 serialization standard. It supports both parsing and stringifying data using
 all versions of YAML, along with all common data schemas. As a particularly
 distinguishing feature, yaml fully supports reading and writing comments and
 blank lines in YAML documents.

Package: notedeln
Description-md5: ed843695ec4f0aae836629e389eb11dc
Description-en: Electronic Lab Notebook called NotedELN
 NotedELN is an electronic lab notebook with an emphasis on solid data
 storage. It is designed for scientists of all stripes, and supports:
 .
  * Taking notes during experiments since it automatically saves your
    input every 10 seconds so that your notes will never be lost;
 .
  * Keeping track of data analysis results since screen shots and
    other graphics can be added to a notebook page by drag-and-drop or
    copy-and-paste;
 .
  * Recording your lit searches, since it will automatically download
    papers from PubMed and archive them with your notebook;
 .
  * Recording your thought processes, since it will never get in the
    way of your typing with arbitrary constraints on input formatting.

Package: nsscache
Description-md5: a67ba458b6f6ba9bf82166c0e6431f22
Description-en: asynchronously synchronise local NSS databases with remote directory services
 Synchronises local NSS caches, such as those served by the
 libnss-cache module, against remote directory services, such as
 LDAP, or prebuild cache files from an HTTP server. This can be
 used alongside the libnss-cache package to keep user account
 information, groups, netgroups, and automounts up to date.
 .
 Use of nsscache and libnss-cache eliminates the need for using a
 cache daemon such as nscd with networked NSS modules such as
 libnss-ldap.

Package: nullmailer
Description-md5: cf5bb13c21a01ffa34dc0048e9689c33
Description-en: simple relay-only mail transport agent
 Nullmailer is a replacement MTA for hosts, which relay to a fixed set of
 smart relays. It is designed to be simple to configure and especially
 useful on slave machines and in chroots.

Package: numberstation
Description-md5: b3cddcdda571af9bdab04251b61458c3
Description-en: TOTP Authenticator application
 A Gnome Authenticator clone. This generates 2fa tokens based on secrets
 installed. It registers as uri-handler for otpauth:// urls so they can be
 added from Megapixels.
 .
 Note this app is designed for small screens, and works perfectly on mobile
 phones.

Package: numconv
Description-md5: 799c6e9d959b8dc56c3e21b6af8f5451
Description-en: utility for conversion numbers as Unicode strings
 numconv is an utility handling number system conversions and provides
 a convenient way to delimit numbers generated by other programs without
 delimitation or with delimitation inappropriate for the locale.

Package: nvme-stas
Description-md5: c650162b9e795d522135c62b62ba1b98
Description-en: NVMe STorage Appliance Services
 This package provides two daemons, stafd and stacd. The STorage Appliance
 Finder Daemon (stafd) automatically discovers NVMe-oF Discovery Controllers
 (DC) and retrieves the list of NVMe Storage Appliances. The STorage Appliance
 Connector Daemon (stacd) establishes I/O connections to the NVMe Storage
 Appliances discovered by stafd.
 .
 This package installs the library for Python 3.

Package: offpunk
Description-md5: 27e607cb0b4bcf62bfbdf71d8ad40d45
Description-en: CLI and offline-first smolnet browser for Gemini, Gopher, etc
 Offpunk is a command-line browser and feed reader dedicated to browsing the
 Web, Gemini, Gopher and Spartan. Thanks to its permanent cache, it is
 optimised to be used offline with rare connections but works as well when
 connected.
 .
 Offpunk is optimised for reading and supports readability mode, displaying
 pictures, subscribing to pages or RSS feeds, managing complex lists of
 bookmarks. Its integrated help and easy commands make it a perfect tool for
 command-line novices while power-users will be amazed by its shell
 integration.

Package: osmid
Description-md5: ef5dc608f0a705e8643feda405a5358f
Description-en: tool to convert MIDI to OSC and OSC to MIDI
 osmid aims to provide a lightweight, portable, easy to use tool to convert
 MIDI to OSC and OSC to MIDI. It is the software handling the communication
 with MIDI devices in Sonic Pi. osmid is divided in 2 tools:
 .
  * m2o: MIDI to OSC conversion
  * o2m: OSC to MIDI conversion

Package: pcscd
Description-md5: 40f2879e95ee03b8541cb267e0af1f29
Description-en: Middleware to access a smart card using PC/SC (daemon side)
 The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
 in a very small form factor for communicating to smart cards and
 smart cards readers.
 .
 The PC/SC daemon is used to dynamically allocate/deallocate reader
 drivers at runtime and manage connections to the readers.

Package: perceptualdiff
Description-md5: 1a5136b84e9c311d65c3b751655e004c
Description-en: perceptual image comparison tool
 PerceptualDiff is an image comparison utility that makes
 use of a computational model of the human visual system to
 compare two images.

Package: picolibc-aarch64-linux-gnu
Description-md5: cf11ee51c15e3141f53e9052db00df59
Description-en: Smaller embedded C library for 64-bit ARM development
 PicoLibc is a combination of Newlib and AVR libc bits designed
 for small-RAM embedded systems. This package has binaries for
 ARM 64-bit processors.

Package: picolibc-arm-none-eabi
Description-md5: 1a5266201391db78cbc530fa9e4b11d9
Description-en: Smaller embedded C library for ARM development
 PicoLibc is a combination of Newlib and AVR libc bits designed
 for small-RAM embedded systems. This package has binaries for
 ARM processors. This library is intended to replace libnewlib-nano

Package: picolibc-riscv64-unknown-elf
Description-md5: 617b68ed97de0fb61b8b0b7cd2ffcfe0
Description-en: Smaller embedded C library for RISC-V development
 PicoLibc is a combination of Newlib and AVR libc bits designed
 for small-RAM embedded systems. This package has binaries for
 RISC-V processors.

Package: picolibc-xtensa-lx106-elf
Description-md5: 0801147a2dfa817cc1ad1de6863878bf
Description-en: Smaller embedded C library for ESP8266 development
 PicoLibc is a combination of Newlib and AVR libc bits designed
 for small-RAM embedded systems. This package has binaries for
 ESP8266 processors.

Package: pinball
Description-md5: f63c26c19a0309f27df7abc9ae871fdd
Description-en: Emilia Pinball Emulator
 The Emilia Pinball Project is a pinball simulator for GNU/Linux and other Unix
 systems. There are only two levels to play with, but they are very addictive.
 .
 You can play with two types of boards and keep high scores.
 .
 Works with OpenGL and needs hardware acceleration. See requeriments
 on README file.

Package: pinball-data
Description-md5: 448d789f2ef91b8e8208fd4c7b5be0fd
Description-en: Data files for the Emilia Pinball Emulator
 The Emilia Pinball Project is a pinball simulator for Linux and other Unix
 systems. There are only two levels to play with, but they are very addictive.
 .
 This package contains various data files used by the pinball emulator.

Package: pinball-dev
Description-md5: 98260b37513cf164e8c9b798499b92fd
Description-en: Development files for the Emilia Pinball Emulator
 The Emilia Pinball Project is a pinball simulator for Linux and other Unix
 systems. There are only two levels to play with, but they are very addictive.
 .
 This package contains header files and configuration for creating new levels.

Package: pipewire-audio-client-libraries
Description-md5: 0732b1c01b478a2ed0c129a9fe3a209f
Description-en: transitional package for pipewire-alsa and pipewire-jack
 PipeWire is a server and user space API to deal with multimedia
 pipelines.
 .
 This is a transitional package for pipewire-alsa and pipewire-jack.
 It can safely be removed.

Package: pipewire-jack
Description-md5: b1998aaae1b3f9655200ae9d55a0824f
Description-en: PipeWire JACK plugin
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains the JACK plugin.

Package: pipewire-libcamera
Description-md5: 3cee68030548b6866f00f9b7e16520b0
Description-en: PipeWire libcamera plugin
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains the libcamera plugin.

Package: pipewire-tests
Description-md5: 562129bf5b813eb86b817e5947a4a298
Description-en: PipeWire multimedia server - tests and examples
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains automated and manual tests and example programs.

Package: pipewire-v4l2
Description-md5: b111863b8529458aac5dadaf0aa29f54
Description-en: PipeWire V4L2 plugin
 PipeWire is a server and user space API to deal with multimedia
 pipelines. This includes:
 .
  - Making available sources of video (such as from a capture devices or
    application provided streams) and multiplexing this with clients.
  - Accessing sources of video for consumption.
  - Generating graphs for audio and video processing.
 .
 This package contains the V4L2 plugin.

Package: plantuml
Description-md5: fe3fe5ee20f1cbdeefe10d6d499e71cb
Description-en: text-to-UML converter
 PlantUML is a program allowing to draw UML diagrams, using a simple
 human readable text description.
 .
 PlantUML supports the following UML diagrams:
   - sequence diagram
   - use case diagram
   - class diagram
   - activity diagram
   - component diagram
   - state diagram
   - object diagram
   - deployment diagram
   - timing diagram
 .
 The following non-UML diagrams are also supported:
   - wireframe graphical interface (Salt)
   - Archimate diagram
   - Specification and Description Language (SDL)
   - Ditaa diagram
   - Gantt diagram
   - mathematics with AsciiMath or JLaTeXMath notation
 .
 Output images can be generated in PNG, in SVG or LaTeX format.
 PlantUML also supports generation of ASCII art diagrams (only for
 sequence diagrams).

Package: pmbootstrap
Description-md5: 3a54273c3766b092c1351bb5d2229782
Description-en: Chroot/build/flash tool to develop and install postmarketOS
 pmbootstrap is the central tool used for development and installation
 of postmarketOS. It works using Alpine chroots to avoid installing
 software on the host's machine.

Package: postfix-lmdb
Description-md5: dadedd4c3edba2567b172520ab66c14b
Description-en: LMDB map support for Postfix
 Postfix is Wietse Venema's mail transport agent that started life as an
 alternative to the widely-used Sendmail program.  Postfix attempts to
 be fast, easy to administer, and secure, while at the same time being
 sendmail compatible enough to not upset existing users. Thus, the outside
 has a sendmail-ish flavor, but the inside is completely different.
 .
 This provides support for LMDB maps in Postfix. If you plan to use LMDB maps
 with Postfix, you need this.

Package: postfix-sqlite
Description-md5: 78969de91802d7f52e4f5b456e3732f9
Description-en: SQLite map support for Postfix
 Postfix is Wietse Venema's mail transport agent that started life as an
 alternative to the widely-used Sendmail program.  Postfix attempts to
 be fast, easy to administer, and secure, while at the same time being
 sendmail compatible enough to not upset existing users. Thus, the outside
 has a sendmail-ish flavor, but the inside is completely different.
 .
 This provides support for SQLite maps in Postfix. If you plan to use
 SQLite maps with Postfix, you need this.

Package: postgresql-15-pg-failover-slots
Description-md5: 5620539a852f241aa2e9727fa41ab1e2
Description-en: High-availability support for PostgreSQL logical replication
 This extension is for anyone with Logical Replication Slots on
 Postgres databases that are also part of a Physical Streaming
 Replication architecture.
 .
 Since logical replication slots are only maintained on the primary
 node, downstream subscribers don't receive any new changes from a
 newly promoted primary until the slot is created, which is unsafe
 because the information that includes which data a subscriber has
 confirmed receiving and which log data still needs to be retained for
 the subscriber will have been lost, resulting in an unknown gap in
 data changes. PG Failover Slots makes logical replication slots
 usable across a physical failover using the following features:
 .
  - Copies any missing replication slots from the primary to the
    standby
  - Removes any slots from the standby that aren't found on the primary
  - Periodically synchronizes the position of slots on the standby
    based on the primary
  - Ensures that selected standbys receive data before any of the
    logical slot walsenders can send data to consumers

Package: postgresql-15-show-plans
Description-md5: eb0646599a3d50e8eb45fc1e5e6ee19d
Description-en: Show query plans of currently running PostgreSQL statements
 This PostgreSQL extension shows the query plans of all currently running SQL
 statements. Plan output format can be plain text (default), JSON, YAML, or
 XML.

Package: prusa-slicer
Description-md5: e48ca208c5da5526c62976a94a73417c
Description-en: G-code generator for 3D printers
 PrusaSlicer converts digital 3D models into printing instructions (G-code)
 for your 3D printer. It cuts the model into horizontal slices (layers),
 generates toolpaths to fill them and calculates the amount of material
 to be extruded.
 .
 PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output
 G-code for several series of 3D printers, including RepRap, Ultimaker,
 Makerbot, as well as SVG files for DLP printers.
 .
 It can be used with a graphical interface, or in batch mode via the
 command-line.

Package: pushpin
Description-md5: 7d73de5ae4b2fdd9ed9a9a4ef1ffb9b2
Description-en: HTTP reverse proxy server for streaming and long-polling services
 Pushpin is a reverse proxy server that makes it easy to implement
 WebSocket, HTTP streaming, and HTTP long-polling services. It communicates
 with backend web applications using regular, short-lived HTTP requests
 (GRIP protocol). This allows backend applications to be written in any
 language and use any webserver.
 .
 Additionally, Pushpin does all of this without exposing a proprietary
 protocol to clients. The HTTP/WebSocket content between the client
 and your server is whatever you want it to be. This makes it ideal for
 implementing APIs.
 .
 Pushpin is written in C++. The name means to "pin" (hold) connections
 open for "pushing".

Package: pylint
Description-md5: 0679fee9f0edb953df8134bc754de169
Description-en: Python 3 code static checker and UML diagram generator
 Pylint is a Python source code analyzer which looks for programming
 errors, helps enforcing a coding standard and sniffs for some code
 smells (as defined in Martin Fowler's Refactoring book)
 .
 Pylint can be seen as another PyChecker since nearly all tests you
 can do with PyChecker can also be done with Pylint. However, Pylint
 offers some more features, like checking length of lines of code,
 checking if variable names are well-formed according to your coding
 standard, or checking if declared interfaces are truly implemented,
 and much more.
 .
 Additionally, it is possible to write plugins to add your own checks.
 .
 The package also ships the following additional commands:
 .
   * pyreverse: an UML diagram generator
   * symilar: an independent similarities checker
   * epylint: Emacs and Flymake compatible Pylint

Package: pylint-doc
Description-md5: e0073fb1d233b2b1972710bdbd06345b
Description-en: Python code static checker and UML diagram generator (documentation)
 Pylint is a Python source code analyzer which looks for programming
 errors, helps enforcing a coding standard and sniffs for some code
 smells (as defined in Martin Fowler's Refactoring book)
 .
 Pylint can be seen as another PyChecker since nearly all tests you
 can do with PyChecker can also be done with Pylint. However, Pylint
 offers some more features, like checking length of lines of code,
 checking if variable names are well-formed according to your coding
 standard, or checking if declared interfaces are truly implemented,
 and much more.
 .
 Additionally, it is possible to write plugins to add your own checks.
 .
 The package contains documentation for pylint.

Package: pyro5-doc
Description-md5: 58003fd4417a876565a7c7238a86b94a
Description-en: distributed object middleware for Python (RPC)
 Pyro (PYthon Remote Object) is an easy to use and powerful distributed object
 system for Python. In a distributed object system, clients send requests to
 distant servers, which owns the remote objects. Pyro simplifies a lot the
 creation of clients and servers, and has among its features:
  - dynamic and static proxies for all remote method invocations,
  - a naming service which keeps record of the location of objects,
  - mobile objects support: clients and servers can pass objects around,
  - exceptions that occur in the remote object is raised on the client too,
  - multithreaded server support to handle multiple requests simultaneously.
 .
 This package contains the documentation files for the pyro5 package.

Package: pyro5-examples
Description-md5: a19adef663041384dbd4fe0e8094f102
Description-en: distributed object middleware for Python (RPC)
 Pyro (PYthon Remote Object) is an easy to use and powerful distributed object
 system for Python. In a distributed object system, clients send requests to
 distant servers, which owns the remote objects. Pyro simplifies a lot the
 creation of clients and servers, and has among its features:
  - dynamic and static proxies for all remote method invocations,
  - a naming service which keeps record of the location of objects,
  - mobile objects support: clients and servers can pass objects around,
  - exceptions that occur in the remote object is raised on the client too,
  - multithreaded server support to handle multiple requests simultaneously.
 .
 This package contains some examples for the pyro5 package.

Package: python-bottle-doc
Description-md5: b3873fcb5309821277d2fc4bd23328bd
Description-en: fast and simple WSGI-framework for Python - documentation
 Bottle is a fast and simple WSGI-framework for the Python programming
 language. It offers request dispatching with url parameter support
 (routes), templates, key/value databases, a built-in HTTP server and
 adapters for many third party WSGI/HTTP-server and template engines.
 .
 This package contains the Python module documentation.

Package: python-cogent-doc
Description-md5: c500b1c82c580b2eec9f3cdab53c4831
Description-en: docs for python3-cogent3
 PyCogent is a software library for genomic biology.
 .
 It is distinguished by many unique built-in capabilities (such as true codon
 alignment) and the frequent addition of entirely new methods for the analysis
 of genomic data.
 .
 This package contains documentation and examples.

Package: python-django-ca-doc
Description-md5: 80865771c1b46fb2ff21c2b095016bb8
Description-en: manage TLS certificate authorities and certificates (Documentation)
 django-ca is a small project to manage TLS certificate authorities and easily
 issue certificates. It is based on cryptography and Django. It can be used as
 an app in an existing Django project or stand-alone with the basic project
 included. Certificates can be managed through Djangos admin interface or via
 manage.py commands - so no webserver is needed, if you’re happy with the
 command-line.
 .
 Features:
  * Set up a secure local certificate authority in just a few minutes.
  * Certificate revocation via CRLs and OCSP.
  * Certificate issuance via ACMEv2, command line or web interface.
  * Management via command line and/or via Djangos admin interface.
  * Get email notifications about certificates about to expire.
 .
 This package contains the documentation.

Package: python-django-filters-doc
Description-md5: 90eca80637b4fd33c48b31ac2583c338
Description-en: filter Django QuerySets based on user selections (Documentation)
 Django-filter is a generic, reusable application to alleviate some of the more
 mundane bits of view code. Specifically allowing the users to filter down a
 queryset based on a model’s fields and displaying the form to let them do this.
 .
 This package contains the documentation.

Package: python-fastjsonschema-doc
Description-md5: 5acff4d03d673b012969338b2cfba752
Description-en: validation of JSON documents by JSON schema drafts 04/06/07 (documentation)
 Fastjsonschema implements validation of JSON documents by JSON schema.
 .
 The library implements JSON schema drafts 04, 06 and 07.
 .
 The main purpose is to have a really fast implementation.
 .
 This is the common documentation package.

Package: python-geoalchemy2-doc
Description-md5: 89b71141135da0a0407ba6421dfcd359
Description-en: SQLAlchemy extension for spatial databases using PostGIS (Documentation)
 GeoAlchemy 2 provides extensions to SQLAlchemy for working with spatial
 databases.
 .
 The only SQL dialect supported by GeoAlchemy 2 is PostgreSQL/PostGIS.
 .
 This package contains the documentation.

Package: python-mdtraj-doc
Description-md5: 60746c46494542a501f2cd4a01465192
Description-en: Read, write and analyze MD trajectories in Python (documentation)
 Read, write and analyze MD trajectories with only a few lines of
 Python code.
 .
 MDTraj is a python library that allows users to manipulate molecular
 dynamics (MD) trajectories. Features include:
  * Wide MD format support, including pdb, xtc, trr, dcd, binpos,
  netcdf, mdcrd, prmtop, and more.
  * Extremely fast RMSD calculations (4x the speed of the original
  Theobald QCP).
  * Extensive analysis functions including those that compute bonds,
  angles, dihedrals, hydrogen bonds, secondary structure, and NMR
  observables.
  * Lightweight, Pythonic API.
 .
 This is the documentation package for mdtraj.

Package: python-pygments-doc
Description-md5: 12ec1cdf25e63fe60e3afaa554496b92
Description-en: documentation for the Pygments
 Pygments is syntax highlighting package.
 .
 This package contains the documentation for Pygments in HTML and
 reStructuredText format.

Package: python-tango-doc
Description-md5: 13956e45a5367529bb9dbeb988fbe63e
Description-en: API for the TANGO control system
 TANGO is an object oriented distributed control system using CORBA,
 mainly developed by the Controls Section of the ALBA Synchrotron.
 PyTango provides bindings for its client- and server-side C++ APIs.
 With PyTango, you can write TANGO device servers and TANGO applications
 (scripts, CLIs, GUIs) that access TANGO device servers in pure Python.
 .
 This package contains the documentation for the python-tango library.

Package: python-wheel-common
Description-md5: 07202c5a087a20709522c00fdc119453
Description-en: built-package format for Python (command-line scripts)
 A wheel is a ZIP-format archive with a specially formatted filename and the
 `.whl` extension.  It is designed to contain all the files for a PEP 376
 compatible install in a way that is very close to the on-disk format.
 .
 The wheel project provides a `bdist_wheel` command for setuptools.  Wheel
 files can be installed with `pip`.
 .
 These are the command line scripts and manpages.

Package: python3-a2wsgi
Description-md5: d5b1af63bababcc392315aa133207982
Description-en: Convert between ASGI and WSGI apps (Python3 version)
 Convert WSGI app to ASGI app or ASGI app to WSGI app in pure Python with no
 dependencies outside the standard library.
 .
 Compared with other converters, the advantage is that a2wsgi will not
 accumulate the requested content or response content in the memory, so you
 don't have to worry about the memory limit. This problem exists in converters
 implemented by uvicorn/startlette or hypercorn.
 .
 This package contains the Python 3 version of the library.

Package: python3-access2base
Description-md5: 62049593c5d96b74959809148594af38
Description-en: interface between Python and the LibreOffice Access2Base library
 Access2Base is a LibreOffice/OpenOffice Basic library of macros for
 (business or personal) application developers and advanced users.
 .
 Their syntax and their meaning are directly inspired by MSAccess.
 The macros are callable from
  - a LibreOffice / OpenOffice Base application,
  - any LibreOffice / OpenOffice document wanting to access data
   stored in databases.
 .
 This package contains an interface between Python (user) scripts
 and Access2Base.

Package: python3-aiohttp-openmetrics
Description-md5: c3a03a6af3ab5bf4ddeda4928f5ca7e1
Description-en: OpenMetrics provider for aiohttp
 This project contains a simple middleware and /metrics route endpoint
 for aiohttp that allow easy implementation of the openmetrics
 protocol.
 .
 It also bundles mechanisms for easily exposing new metrics.

Package: python3-aiojobs
Description-md5: 867ebdb48a792c49dd6eac92f21bd449
Description-en: Job scheduler for managing background tasks (asyncio)
 The library gives a controlled way for scheduling background tasks for
 Python asyncio applications.
 .
 It has integration for the aiohttp server, making it easy to
 spawn background jobs for requests.

Package: python3-bitarray
Description-md5: 75477cdb36ae1e7cd63e2a3b80fb641a
Description-en: Python3 module for efficient boolean array handling
 The bitarry module provides an object type which efficiently represents an
 array of booleans. Bitarrays are sequence types and behave very much like
 usual lists. Eight bits are represented by one byte in contiguous block of
 memory. The user can select between two representations; little-endian and
 big-endian.
 .
 Most of the functionality is implemented in C. Methods for accessing the
 machine representation are provided. This can be useful when bit level access
 to binary files is required, such as portable bitmap image files (.pbm). Also,
 when dealing with compressed data which uses variable bit length encoding, you
 may find this module useful.
 .
 This package provides the Python3 version of the module.

Package: python3-bottle
Description-md5: 21807b6d91195910e41cb4c350b1df29
Description-en: fast and simple WSGI-framework for Python 3
 Bottle is a fast and simple WSGI-framework for the Python3 programming
 language. It offers request dispatching with url parameter support
 (routes), templates, key/value databases, a built-in HTTP server and
 adapters for many third party WSGI/HTTP-server and template engines.

Package: python3-brial
Description-md5: c156f962c6f2314f9f45be4d5ac79611
Description-en: polynomials over Boolean Rings, Python 3 module
 The core of BRiAl is a C++ library, which provides high-level data
 types for Boolean polynomials and monomials, exponent vectors, as
 well as for the underlying polynomial rings and subsets of the
 powerset of the Boolean variables. As a unique approach, binary
 decision diagrams are used as internal storage type for polynomial
 structures. On top of this C++-library a Python interface
 is provided. This allows parsing of complex polynomial systems, as well
 as sophisticated and extendable strategies for Groebner base
 computation. BRiAl features a powerful reference implementation
 for Groebner basis computation.
 .
 This package contains the BRiAl Python 3 module.

Package: python3-clang-15
Description-md5: 2c9b6237594ba364f2afb9b0458f2f14
Description-en: Clang Python Bindings
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This binding package provides access to the Clang compiler and libraries.

Package: python3-clang-16
Description-md5: 2c9b6237594ba364f2afb9b0458f2f14
Description-en: Clang Python Bindings
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This binding package provides access to the Clang compiler and libraries.

Package: python3-cogent3
Description-md5: 7f66bef045873462e2411adbafa6b365
Description-en: framework for genomic biology
 PyCogent is a software library for genomic biology. It is a fully
 integrated and thoroughly tested framework for:
  * controlling third-party applications,
  * devising workflows; querying databases,
  * conducting novel probabilistic analyses of biological sequence
    evolution, and
  * generating publication quality graphics.
 It is distinguished by many unique built-in capabilities (such as true codon
 alignment) and the frequent addition of entirely new methods for the analysis
 of genomic data.

Package: python3-django-ca
Description-md5: 93c689880f615c9ecdc0c8cde4e9b220
Description-en: manage TLS certificate authorities and certificates (Python3 version)
 django-ca is a small project to manage TLS certificate authorities and easily
 issue certificates. It is based on cryptography and Django. It can be used as
 an app in an existing Django project or stand-alone with the basic project
 included. Certificates can be managed through Djangos admin interface or via
 manage.py commands - so no webserver is needed, if you’re happy with the
 command-line.
 .
 Features:
  * Set up a secure local certificate authority in just a few minutes.
  * Certificate revocation via CRLs and OCSP.
  * Certificate issuance via ACMEv2, command line or web interface.
  * Management via command line and/or via Djangos admin interface.
  * Get email notifications about certificates about to expire.
 .
 This package contains the Python 3 version of the library.

Package: python3-django-filters
Description-md5: 2d961a83acf93546405304ce0405794e
Description-en: filter Django QuerySets based on user selections (Python3)
 Django-filter is a generic, reusable application to alleviate some of the more
 mundane bits of view code. Specifically allowing the users to filter down a
 queryset based on a model’s fields and displaying the form to let them do this.
 .
 This package contains the Python 3 version of the library.

Package: python3-docx
Description-md5: 6e906b57e01a8d5076fb9de4c3654bee
Description-en: library for creating and updating Microsoft Word files (Python 3)
 python-docx is a Python library for creating and updating Microsoft Word
 (.docx) files.
 .
 This package installs the library for Python 3.

Package: python3-fastjsonschema
Description-md5: 79f063f366a282cd508821f295140ad7
Description-en: validation of JSON documents by JSON schema drafts 04/06/07
 Fastjsonschema implements validation of JSON documents by JSON schema.
 .
 The library implements JSON schema drafts 04, 06 and 07.
 .
 The main purpose is to have a really fast implementation.
 .
 This package installs the library for Python 3.

Package: python3-genx
Description-md5: 532af7e4345a07615e761e413c9ad2ab
Description-en: differential evolution algorithm for fitting
 GenX is a versatile program using the differential evolution
 algorithm for fitting, primarily, X-ray and neutron reflectivity
 data, lately also surface x-ray diffraction data. The differential
 evolution algorithm is a robust optimization method which avoids
 local minima but at same is a highly effective. GenX is written in
 Python and uses the wxpython package for the Graphical User Interface
 (GUI). A model to fit is defined either through a GUI plug-in or via
 a Python script. The possibility to script everything makes it easy
 to develop completely new fitting model. Clearly, GenX is extremely
 modular, making it possible to extend the program with models and
 plug-ins for most fitting problems. At the present GenX is shipped
 with models for x-ray and neutron specular reflectivity,
 off-specular x-ray reflectivity and surface x-ray diffraction

Package: python3-geoalchemy2
Description-md5: 30db65496c8766baeea6493aeb62c284
Description-en: SQLAlchemy extension for spatial databases using PostGIS
 GeoAlchemy 2 provides extensions to SQLAlchemy for working with spatial
 databases.
 .
 The only SQL dialect supported by GeoAlchemy 2 is PostgreSQL/PostGIS.

Package: python3-glob2
Description-md5: 4ddd792a20f84bbf6379ab7b547c8723
Description-en: Enhanced glob module for Python
 This module provides an extended version of Python's builtin glob
 module with a number of additions.
 .
 This package contains the python 3 version.

Package: python3-injector
Description-md5: d26ac2cd58071db7ab9be2dda2eae090
Description-en: Python dependency injection framework
 While dependency injection is easy to do in Python due to its support
 for keyword arguments, the ease with which objects can be mocked and its
 dynamic nature, a framework for assisting in this process can remove a
 lot of boiler-plate from larger applications.
 .
 That's where Injector can help. It automatically and transitively
 provides dependencies for you. As an added benefit, Injector encourages
 nicely compartmentalised code through the use of :ref:modules <module>.
 .
 This package installs the library for Python 3.

Package: python3-ixion
Description-md5: c2eee1b6be4cdad805ad4aef37f777ef
Description-en: general purpose formula parser & interpreter library -- Python module
 Ixion is a general purpose formula parser & interpreter that can calculate
 multiple named targets, or “cells”.
 .
 This package contains the Python module.

Package: python3-klein
Description-md5: 79ad1af396ad5a01fc690361840edfea
Description-en: micro-framework for developing web services with Python
 Klein is a micro-framework for developing production-ready web services with
 Python. It is 'micro' in that it has an incredibly small API similar to Bottle
 and Flask. It is not 'micro' in that it depends on things outside the standard
 library. This is primarily because it is built on widely used and well tested
 components like Werkzeug and Twisted.

Package: python3-lasso
Description-md5: 69483e412988938f8df3295419ae6dd8
Description-en: Library for Liberty Alliance and SAML protocols - Python bindings
 Lasso is an implementation of Liberty Alliance and related protocols, for
 network identity federations, single sign-on and other web services protocols.
 The main specifications implemented by the library are ID-FF, ID-WSF and SAML.
 .
 This package contains Python bindings for liblasso, needed to use lasso
 in Python applications.

Package: python3-lldb-15
Description-md5: 0185ffb3cdaadce7edcc313c1e68ae92
Description-en: Next generation, high-performance debugger, python3 lib
 LLDB is a next generation, high-performance debugger. It is built as a set of
 reusable components which highly leverage existing libraries in the larger LLVM
 Project, such as the Clang expression parser and LLVM disassembler.
 .
 This binding package provides access to lldb.

Package: python3-lldb-16
Description-md5: 0185ffb3cdaadce7edcc313c1e68ae92
Description-en: Next generation, high-performance debugger, python3 lib
 LLDB is a next generation, high-performance debugger. It is built as a set of
 reusable components which highly leverage existing libraries in the larger LLVM
 Project, such as the Clang expression parser and LLVM disassembler.
 .
 This binding package provides access to lldb.

Package: python3-matrix-nio
Description-md5: 585156816095753d1050533569f53015
Description-en: Python no-IO library for the matrix chat protocol - Python3 library
 Nio is a multilayered Matrix client library.
 The underlying base layer doesn't do any IO on its own.
 On top of the base layer,
 a no-IO HTTP client implementation exists,
 as well as a full fledged batteries included asyncio layer
 using aiohttp.
 .
 Matrix is an open standard and lightweight protocol
 for real-time communication.
 .
 This package provides matrix-nio module
 for Python 3.

Package: python3-matrix-nio-doc
Description-md5: 3c79b4346241d1e5d9daa208d56e13ed
Description-en: Python no-IO library for the matrix chat protocol - documentation
 Nio is a multilayered Matrix client library.
 The underlying base layer doesn't do any IO on its own.
 On top of the base layer,
 a no-IO HTTP client implementation exists,
 as well as a full fledged batteries included asyncio layer
 using aiohttp.
 .
 Matrix is an open standard and lightweight protocol
 for real-time communication.
 .
 This package provides documentation for the matrix-nio module.

Package: python3-mdp
Description-md5: 1d1a8383495e0c98318017ef535d0552
Description-en: Modular toolkit for Data Processing
 Python data processing framework for building complex data processing software
 by combining widely used machine learning algorithms into pipelines and
 networks. Implemented algorithms include: Principal Component Analysis (PCA),
 Independent Component Analysis (ICA), Slow Feature Analysis (SFA), Independent
 Slow Feature Analysis (ISFA), Growing Neural Gas (GNG), Factor Analysis,
 Fisher Discriminant Analysis (FDA), and Gaussian Classifiers.

Package: python3-mdtraj
Description-md5: 04d7dbec187003c6a29c313a28d81a7b
Description-en: Read, write and analyze MD trajectories in Python
 Read, write and analyze MD trajectories with only a few lines of
 Python code.
 .
 MDTraj is a python library that allows users to manipulate molecular
 dynamics (MD) trajectories. Features include:
  * Wide MD format support, including pdb, xtc, trr, dcd, binpos,
  netcdf, mdcrd, prmtop, and more.
  * Extremely fast RMSD calculations (4x the speed of the original
  Theobald QCP).
  * Extensive analysis functions including those that compute bonds,
  angles, dihedrals, hydrogen bonds, secondary structure, and NMR
  observables.
  * Lightweight, Pythonic API.
 .
 MDTraj includes a command-line application, mdconvert-mdtraj,
 for converting trajectories between formats.
 .
 This package installs the library for Python 3, together with the
 command line utilities mdconvert-mdtraj and mdinspect.

Package: python3-mediainfodll
Description-md5: dabb794f5777d21eaa1da8e6cd9c0159
Description-en: library for reading metadata from media files -- shared library
 MediaInfo is a library used for retrieving technical information and other
 metadata about audio or video files.
 .
 A non-exhaustive list of the information MediaInfo can retrieve from media
 files include:
  - General: title, author, director, album, track number, date, duration...
  - Video: codec, aspect, fps, bitrate...
  - Audio: codec, sample rate, channels, language, bitrate...
  - Text: language of subtitle
  - Chapters: number of chapters, list of chapters
 .
 MediaInfo supports the following formats:
  - Video: MKV, OGM, AVI, DivX, WMV, QuickTime, Real, MPEG-1, MPEG-2,
           MPEG-4, DVD (VOB)...
  - Video Codecs: DivX, XviD, MSMPEG4, ASP, H.264, AVC...)
  - Audio: OGG, MP3, WAV, RA, AC3, DTS, AAC, M4A, AU, AIFF...
  - Subtitles: SRT, SSA, ASS, SAMI...
 .
 This package contains the Python 3.x module required for using this library
 from Python 3.x applications.

Package: python3-opm-common
Description-md5: 0527a9a9f3d04e95c08b52c8459d7d2d
Description-en: Tools for Eclipse reservoir simulation files -- Python wrappers
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes,
 especially for simulating CO2 sequestration and improved and enhanced
 oil recovery.
 .
 This package contains the Python wrappers for reading, parsing, and
 writing files in Eclipse format, a format widely used in the
 reservoir simulation community.

Package: python3-opm-simulators
Description-md5: 5411eb2e3edbc3284d05fe5e42c61d3b
Description-en: Python wrappers for the Open porous media / reservoir simulators
 The Open Porous Media (OPM) software suite provides libraries and
 tools for modeling and simulation of porous media processes, especially
 for simulating CO2 sequestration and improved and enhanced oil recovery.
 .
 opm-simulators provides a research (ebos) and a production (flow) fully
 implicit black-oil simulators, supporting one to three phases and
 supporting solvent and polymer options. It uses cell centered finite
 volume schemes with two point flux approximation and automatic
 differentiation for the discretization and uses state of the art linear
 and nonlinear solvers. It supports standard and multi segment well
 models and reading and writing file in Eclipse format, a very common
 format used in the oil reservoir simulation community.
 .
 Package provides Python wrappers for the simulators.

Package: python3-pdm-backend
Description-md5: e58ccf9e243281b98eb90aa5ef778ffe
Description-en: Build backend used by PDM
 This is the backend for PDM projects that is fully-compatible with
 PEP 517 spec, but you can also use it alone. It reads the metadata
 of PEP 621 format and coverts it to Core metadata.

Package: python3-pkcs11
Description-md5: 0c82e1b40c419fc6e67653e7ccccd845
Description-en: high level PKCS#11 interface for Python
 A high level, "more Pythonic" interface to the PKCS#11 (Cryptoki) standard to
 support HSM and Smartcard devices in Python.
 .
 The interface is designed to follow the logical structure of a HSM, with
 useful defaults for obscurely documented parameters. Many APIs will optionally
 accept iterables and act as generators, allowing you to stream large data
 blocks for symmetric encryption.
 .
 It also includes numerous utility functions to convert between PKCS#11 data
 structures and common interchange formats including PKCS#1 and X.509.
 .
 The library is fully documented and has a full integration test suite for all
 features, with continuous integration against multiple HSM platforms including
 Entrust nShield, Opencryptoki TPM and OpenSC/Smartcard-HSM/Nitrokey HSM.

Package: python3-plover-stroke
Description-md5: 318a7c543e24f58edfb96641ce163cdd
Description-en: Stroke handling helper library for Plover
 This package provides a stroke handling helper library for
 working with steno stroke. It is a dependency for plover
 software.

Package: python3-plyer
Description-md5: e23491ee76a456253362314d2fa122f3
Description-en: platform-independent wrapper for platform-dependent APIs
 Plyer is a platform-independent api
 to use features commonly found on various platforms,
 notably mobile ones, in Python.

Package: python3-pycrowdsec
Description-md5: e3ed98aa035c6ec03b9abc27d661883b
Description-en: integration of CrowdSec with Python projects (Python3 version)
 CrowdSec is a FOSS tool which parses logs and detects attacks. PyCrowdSec
 enables integration of CrowdSec with Python projects. It is easy to setup and
 boosts the security by leveraging CrowdSec's attack detection capabilities.
 .
 PyCrowdSec contains a Python client library for CrowdSec, as well as
 middlewares for django and flask integrations.
 .
 This package contains the Python 3 version of the library.

Package: python3-pykcs11
Description-md5: 9f345e35dbeefa60a39309e4edcd2c2d
Description-en: PKCS#11 wrapper for Python
 PyKCS11 let you access to almost all PKCS#11 functions and data types using
 any PKCS#11 library, such as the various modules supplied by smartcard
 vendors.
 .
 The wrapper comes with 2 interfaces: a low level and very thin interface over
 the original PKCS#11 API, generated using the SWIG compiler (designed for
 library tests); and an high level interface that offers a simpler access (with
 few limits) to the PKCS#11 APIs.
 .
 Keywords: pkcs11

Package: python3-pyo
Description-md5: 5ee0777608274793eef805820f86089c
Description-en: Python3 module written in C to help digital signal processing script creation
 pyo is a Python module containing classes for a wide variety of audio signal
 processing types. With pyo, user will be able to include signal processing
 chains directly in Python scripts or projects, and to manipulate them in real
 time through the interpreter. Tools in pyo module offer primitives, like
 mathematical operations on audio signal, basic signal processing (filters,
 delays, synthesis generators, etc.), but also complex algorithms to create
 sound granulation and others creative audio manipulations.
 .
 pyo supports OSC protocol (Open Sound Control), to ease communications between
 softwares, and MIDI protocol, for generating sound events and controlling
 process parameters.
 .
 pyo allows creation of sophisticated signal processing chains with all the
 benefits of a mature, and wildly used, general programming language.
 .
 This package installs the library for Python 3.

Package: python3-pyproject-api
Description-md5: b3c24c7a03ed2fea819b3f6018aa45ff
Description-en: API to interact with Python pyproject.toml-based projects
 pyproject-api aims to abstract away interaction with pyproject.toml style
 projects in a flexible way.

Package: python3-pyprojroot
Description-md5: 5d1c6fabb095a543cbca17f92d4dcafb
Description-en: Find Python project root paths and return relative project files
 This library finds the root working directory for your Python project as a
 'pathlib' object.
 .
 You can use the 'here' function to pass in a relative path from the Python
 project root directory (no matter what working directory you are in the
 project), and you will get a full path to the specified file.
 .
 This allows you to restructure the files in your Python project without having
 to worry about changing file paths.

Package: python3-pyqtconsole
Description-md5: 84e1b33959dca0bbcdc2c26183af0817
Description-en: Light weight python interpreter, easy to embed into Qt apps
 pyqtconsole is a lightweight python console for Qt applications. It's made to
 be easy to embed in other Qt applications and comes with some examples that
 show how this can be done. The interpreter can run in a separate thread, in
 the UI main thread or in a gevent task.

Package: python3-pyro5
Description-md5: 6c560afb3eeafcff44bad1cc59910315
Description-en: distributed object middleware for Python (RPC)
 Pyro (PYthon Remote Object) is an easy to use and powerful distributed object
 system for Python. In a distributed object system, clients send requests to
 distant servers, which owns the remote objects. Pyro simplifies a lot the
 creation of clients and servers, and has among its features:
  - dynamic and static proxies for all remote method invocations,
  - a naming service which keeps record of the location of objects,
  - mobile objects support: clients and servers can pass objects around,
  - exceptions that occur in the remote object is raised on the client too,
  - multithreaded server support to handle multiple requests simultaneously.
 .
 This package contains the core Pyro5 module for Python 3.x .
 .
 The documentation is available in the pyro5-doc package.
 A lot of examples are available in the pyro5-examples package.

Package: python3-python-docx
Description-md5: 89d3f04b18112d917be9435acaaaf54a
Description-en: transitional package
 This is a transitional package for python3-docx.

Package: python3-reedsolo
Description-md5: e88a016c24126e25011832f1cc4cdca5
Description-en: Reed Solomon encoder/decoder library in Python
 A pythonic universal errors-and-erasures Reed-Solomon Codec to protect your
 data from errors and bitrot. It includes a pure Python implementation and a
 speed-optimized Cython/C extension.
 .
 This is a burst-type implementation, so that it supports any Galois field
 higher than 2^3, but not binary streams. Burst errors are non-random errors
 that more often happen on data storage mediums such as hard drives, hence this
 library is better suited for data storage protection, and less for streams
 noise correction, although it also works for this purpose but with a bit of
 overhead (since it works with bytes only, instead of bits).
 .
 Based on the wonderful tutorial at Wikiversity, written by "Bobmath" and
 "LRQ3000". If you are just starting with Reed-Solomon error correction codes,
 the Wikiversity article is a good beginner's introduction.

Package: python3-rq
Description-md5: d192cb8bf5b9d82429bd09323c51ebe9
Description-en: Simple job queues for Python 3
 RQ (Redis Queue) is a simple Python library for queueing jobs and
 processing them in the background with workers. It is backed by
 Redis and it is designed to have a low barrier to entry.
 It can be integrated in your web stack easily.

Package: python3-speechpy-fast
Description-md5: 49138919cace5a20f9d70af3d8e0ba80
Description-en: Fork of the speechpy package for extracting speech features (Python 3)
 Speechpy-fast provides most frequent used speech features
 including MFCCs and filterbank energies alongside with the
 log-energy of filterbanks.
 .
 This library is a backward compatibility library being phased out
 and replaced with sonopy.
 .
 This package installs the library for Python 3.

Package: python3-spyder-line-profiler
Description-md5: 597d9b89bbf1ec9fffa605458f1b6222
Description-en: line profiling plugin for the Spyder IDE
 This is a plugin for the Spyder IDE that integrates the Python line profiler.
 .
 Add a `@profile` decorator to the functions that you wish to profile then
 press Shift+F10 (line profiler default) to run the profiler on the current
 script, or go to `Run > Run line profiler`.
 .
 The results will be shown in a dockwidget, grouped by function. Lines with a
 stronger color take more time to run.

Package: python3-starlette
Description-md5: 97e426dcd54d67f5b2f64d7d9535faef
Description-en: ASGI library ideal for building high performance asyncio services
 Starlette is a lightweight ASGI (Asynchronous Server Gateway Interface)
 framework/toolkit, which is ideal for building high performance asyncio
 services.
 .
 It is production-ready, and gives you the following:
 .
  * Seriously impressive performance.
  * WebSocket support.
  * In-process background tasks.
  * Startup and shutdown events.
  * Test client built on `httpx`.
  * CORS, GZip, Static Files, Streaming responses.
  * Session and Cookie support.
  * 100% test coverage.
  * 100% type annotated codebase.
  * Zero hard dependencies.
 .
 Example:
 .
  from starlette.applications import Starlette
  from starlette.responses import JSONResponse
  from starlette.routing import Route
 .
  async def homepage(request):
      return JSONResponse({'hello': 'world'})
 .
  app = Starlette(debug=True, routes=[
    Route('/', homepage),
  ])

Package: python3-tango
Description-md5: 61b09160772b50d23c891ebab80dd8ec
Description-en: API for the TANGO control system (Python 3)
 TANGO is an object oriented distributed control system using CORBA,
 mainly developed by the Controls Section of the ALBA Synchrotron.
 PyTango provides bindings for its client- and server-side C++ APIs.
 With PyTango, you can write TANGO device servers and TANGO applications
 (scripts, CLIs, GUIs) that access TANGO device servers in pure Python.
 .
 This is the Python 3 version of the package.

Package: python3-torch-scatter
Description-md5: 7d395cc3ab9a93ac4620929f5b17b9a5
Description-en: PyTorch Extension Library of Optimized Scatter Operations
 This package consists of a small extension library of highly optimized sparse
 update (scatter and segment) operations for the use in PyTorch, which are
 missing in the main package. Scatter and segment operations can be roughly
 described as reduce operations based on a given "group-index" tensor. Segment
 operations require the "group-index" tensor to be sorted, whereas scatter
 operations are not subject to these requirements.
 .
 This package installs the library for Python 3.

Package: python3-torch-sparse
Description-md5: 8ecc008a1824c740638d694a7ec7a644
Description-en: PyTorch Extension Library of Optimized Autograd Sparse Matrix Operations
 This package consists of a small extension library of optimized sparse matrix
 operations with autograd support.
 .
 This package installs the library for Python 3.

Package: python3-ufo-tofu
Description-md5: 3a6272d00ae040848aec3d5807511a5c
Description-en: Fast, versatile and user-friendly image processing toolkit
 This repository contains Python data processing scripts to be used
 with the UFO framework. At the moment they are targeted at
 high-performance reconstruction of tomographic data sets.

Package: python3-usb
Description-md5: c38ed2531a10a11af296ee28c245a611
Description-en: USB interface for Python (Python3)
 For interacting with USB devices directly from Python, this
 library may come in handy.
 .
 This version of python-usb is written entirely in Python and uses
 ctypes to interact with various USB libraries
 .
 This package contains the Python 3 version of pyusb.

Package: python3-webdav
Description-md5: 26c97765eb3f525f83a50643488ea9f6
Description-en: WebDAV server implementation in Python (Python3)
 PyWebDAV is a WebDAV server implementation in Python. It's aim is to provide a
 simple interface to webdav services to any application which needs it. It can
 be run as a daemon.
 .
 This package is targeting Python version 3.

Package: python3-wheel
Description-md5: f239d28b37bcadf8b6416e23a48ae50d
Description-en: built-package format for Python
 A wheel is a ZIP-format archive with a specially formatted filename and the
 `.whl` extension.  It is designed to contain all the files for a PEP 376
 compatible install in a way that is very close to the on-disk format.
 .
 The wheel project provides a `bdist_wheel` command for setuptools.  Wheel
 files can be installed with `pip`.
 .
 This is the Python 3 compatible package.

Package: python3-wheel-whl
Description-md5: 0f475a80918fad10a6e24ea8a9467200
Description-en: built-package format for Python (wheel wheel)
 A wheel is a ZIP-format archive with a specially formatted filename and the
 `.whl` extension.  It is designed to contain all the files for a PEP 376
 compatible install in a way that is very close to the on-disk format.
 .
 This is the support package for the PEP 427 wheel version of the package,
 required for using wheel inside a virtual environment.

Package: python3-yattag
Description-md5: 4f212c5280dd074df6d6639a082c9e29
Description-en: library for generating HTML or XML in a pythonic way (Python 3)
 With Yattag,
 .
  * you don't have to worry about closing HTML tags
  * your HTML templates are Python code. Not a weird template language. Just
    Python.
  * you can easily render HTML forms, with defaults values and error messages.
 .
 It's actually easier and more readable to generate dynamic HTML with Yattag
 than to write static HTML.

Package: python3.11-full
Description-md5: 3ffbac3f5e4c1a2e484de11d50798498
Description-en: Python Interpreter with complete class library (version 3.11)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on the full
 standard library of Python for Python developers. Including modules
 used only at build-time, such as venv and distutils, and modules with
 complex dependencies, such as tk and IDLE. All batteries included.
 .
 According to the Debian Python policy, this package must not be used in
 build dependencies, dependencies and recommendations.

Package: python3.11-nopie
Description-md5: 0567e449dcfb725ba7bb7fc9af4901b6
Description-en: Python interpreter linked without PIE (version 3.11)
 This package contains the interpreter not built as position independent
 executable. This interpreter is diverting the python3.11 executable, and making
 the interpreter built with PIE available as python3.11-pie.

Package: python3.11-venv
Description-md5: bf8123dbf5c3c7b6bd2c7ba323f6994e
Description-en: Interactive high-level object-oriented language (pyvenv binary, version 3.11)
 Python is a high-level, interactive, object-oriented language. Its 3.11 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains the pyvenv-3.11 binary.

Package: qmake6
Description-md5: a1a8171d50e63c6336f4e0e02e481f00
Description-en: Qt 6 qmake Makefile generator tool
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the Qt 6 qmake, a tool that helps simplify
 the build process for development project across different platforms.
 qmake automates the generation of Makefiles so that only a few lines of
 information are needed to create each Makefile. qmake can be used for any
 software project, whether it is written using Qt or not.
 .
 Qt 6 qmake requires a platform and a compiler description file which contains
 many default values used to generate appropriate Makefiles.
 .
 This package contains also these platform specifications.

Package: qmake6-bin
Description-md5: 7bce87133b1389c453ddd624bdcce8f7
Description-en: Qt 6 qmake Makefile generator tool — binary file
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the binary file for the qmake buildsystem. Do not
 install this package directly, use qmake6 instead.

Package: qt5-flatpak-platformtheme
Description-md5: c5afb80c1f79f97f0ac8a0d6b5fd1f84
Description-en: Qt 5 Flatpak platform theme (transitional package)
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This is a transitional package which can safely be removed.

Package: qt5-gtk-platformtheme
Description-md5: 39eaf682438c89ae84a301289473e806
Description-en: Qt 5 GTK+ 3 platform theme
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package provides the GTK+ 3 platform theme, which makes Qt use
 native icon themes, fonts, and dialogs on GTK-based environments.

Package: qt5-qmake
Description-md5: d22e820ccda7e109fc6cf2c171df093e
Description-en: Qt 5 qmake Makefile generator tool
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the Qt 5 qmake, a tool that helps simplify
 the build process for development project across different platforms.
 qmake automates the generation of Makefiles so that only a few lines of
 information are needed to create each Makefile. qmake can be used for any
 software project, whether it is written using Qt or not.
 .
 Qt 5 qmake requires a platform and compiler description file which contains
 many default values used to generate appropriate Makefiles.
 .
 This package contains also these platform specifications.

Package: qt5-qmake-bin
Description-md5: 86cdde8a3c4de9597f2460df4811e75d
Description-en: Qt 5 qmake Makefile generator tool — binary file
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the binary file for qmake buildsystem. Do not
 install this package directly, use qt5-qmake instead.

Package: qt5-xdgdesktopportal-platformtheme
Description-md5: 0a5ddb5371f4cf42243bc780d020c01f
Description-en: Qt 5 XDG Desktop Portal platform theme
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package provides the XDG Desktop portal platform theme, which makes
 Qt use native file dialogs on Flatpak/Snap based environments.

Package: qt6-base-dev
Description-md5: 5de122fb49a6530449cd0ff824832a0e
Description-en: Qt 6 base development files
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the header development files used for building
 Qt 6 applications.
 .
 If you are interested in packaging Qt 6 stuff please take a look at
 https://qt-kde-team.pages.debian.net/packagingqtbasedstuff.html

Package: qt6-base-dev-tools
Description-md5: 03c8816affbc4104348354220270f2af
Description-en: Qt 6 base development programs
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the development programs used for building Qt 6
 applications, such as moc, qdbuscpp2xml, qdbusxml2cpp, rcc,
 syncqt and uic.
 .
 We do not recommend depending on this package directly. Please depend
 on qt6-base-dev instead.

Package: qt6-base-private-dev
Description-md5: 9c080a5ddebf3c0e2f58a5440a9ec5dc
Description-en: Qt 6 base private development files
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the private header development files for building some
 Qt 6 applications like the Qt Creator QML Designer plugin.
 .
 Use at your own risk.

Package: qt6-gtk-platformtheme
Description-md5: d29e94f2ccff167a87b09a3efec61ae5
Description-en: Qt 6 GTK+ 3 platform theme
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package provides the GTK+ 3 platform theme, which makes Qt use
 native icon themes, fonts, and dialogs on GTK-based environments.

Package: qt6-qpa-plugins
Description-md5: 9fe363e9294190c67fdee748c29adca2
Description-en: Qt 6 QPA plugins
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the following plugins:
   * uioTouch Plugin
   * VNC Plugin

Package: qt6-xdgdesktopportal-platformtheme
Description-md5: 70b7a21f40d6760f8c17fc0359260b87
Description-en: Qt 6 XDG Desktop Portal platform theme
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package provides the XDG Desktop portal platform theme, which makes
 Qt use native file dialogs on Flatpak/Snap based environments.

Package: qtbase5-dev
Description-md5: eb1a5e244bfc7327cfdf56f6aff9cab9
Description-en: Qt 5 base development files
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the header development files used for building Qt 5
 applications.
 .
 If you are interested in packaging Qt 5 stuff please take a look at
 https://qt-kde-team.pages.debian.net/packagingqtbasedstuff.html

Package: qtbase5-dev-tools
Description-md5: 389ab33cc35e6afecee8a8240f83313f
Description-en: Qt 5 base development programs
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the development programs used for building Qt 5
 applications, such as moc, qdbuscpp2xml, qdbusxml2cpp, rcc,
 syncqt and uic.
 .
 We do not recommend depending on this package directly. Please depend
 on qtbase5-dev instead.

Package: qtbase5-doc
Description-md5: ca14ee36d3a7fc0206bfcbb35e2be024
Description-en: Qt 5 base documentation
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the documentation for the Qt 5 base libraries.

Package: qtbase5-doc-dev
Description-md5: 5f103459e351d7b7e73520be6c3de13a
Description-en: Qt 5 base tags files
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the doxygen tags files for the qtbase documentation.

Package: qtbase5-doc-html
Description-md5: 2e4adf9de7ccece9e0fe9efb81d70fe6
Description-en: Qt 5 base HTML documentation
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the HTML documentation for the Qt 5 base
 libraries.

Package: qtbase5-examples
Description-md5: ac043eae380c0dcd4bce5d40a835f3e4
Description-en: Qt 5 base examples
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains Qt base 5 examples.

Package: qtbase5-private-dev
Description-md5: b388fd86350adaeeb21580f32ba12fcc
Description-en: Qt 5 base private development files
 Qt is a cross-platform C++ application framework. Qt's primary feature
 is its rich set of widgets that provide standard GUI functionality.
 .
 This package contains the private header development files for building some
 Qt 5 applications like Qt Creator QML Designer plugin.
 .
 Use at your own risk.

Package: qtcreator
Description-md5: 0c5039e0a507c692a334b78d1bf243cc
Description-en: integrated development environment (IDE) for Qt
 Qt Creator is a cross-platform integrated development environment (IDE)
 designed to make development with the Qt application framework faster
 and easier.
 .
 It includes:
  * An advanced C++ code editor
  * Integrated GUI layout and forms designer
  * Project and build management tools
  * Integrated, context-sensitive help system
  * Visual debugger
  * Rapid code navigation tools
  * Supports multiple platforms
  * Qt Quick Designer

Package: qtcreator-data
Description-md5: c45ca137d3d28e169f9b5d991a0e8951
Description-en: application data for Qt Creator IDE
 This package contains architecture-independent data for Qt Creator IDE.

Package: qtcreator-doc
Description-md5: 9dc1735086667e3402140ad692f5a8cc
Description-en: documentation for Qt Creator IDE
 Qt Creator is a cross-platform integrated development environment (IDE)
 designed to make development with the Qt application framework faster
 and easier.
 .
 This package contains documentation for Qt Creator IDE.

Package: r-base
Description-md5: 5787ca79ed716232c4cc2087ed9b425b
Description-en: GNU R statistical computation and graphics system
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available from
 CRAN, the Comprehensive R Archive Network, many also as Debian packages,
 named 'r-cran-<name>'.
 .
 This package is a metapackage which eases the transition from the
 pre-1.5.0 package setup with its larger r-base package. Once installed, it
 can be safely removed and apt-get will automatically upgrade its components
 during future upgrades.  Providing this package gives a way to users to
 then only install r-base-core if they so desire.

Package: r-base-core
Description-md5: 49185484f9628e672027078b83df963d
Description-en: GNU R core of statistical computation and graphics system
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available
 from CRAN, the Comprehensive R Archive Network, many also as Debian
 packages, named 'r-cran-<name>'.
 .
 This package provides the core GNU R system from which only the optional
 documentation packages r-base-html, r-doc-html, r-doc-pdf and r-doc-info
 have been split off to somewhat reduce the size of this package.

Package: r-base-dev
Description-md5: 1a1267651faee382ef4781870ce94812
Description-en: GNU R installation of auxiliary GNU R packages
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available from
 CRAN, the Comprehensive R Archive Network, many also as Debian packages,
 named 'r-cran-<name>'.
 .
 This package ensures that other Debian packages needed for installation of
 some auxiliary R packages are installed.

Package: r-base-html
Description-md5: f571f4afe641faf52e91ea25f9cd2145
Description-en: GNU R html docs for statistical computing system functions
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available from
 CRAN, the Comprehensive R Archive Network, many also as Debian packages,
 named 'r-cran-<name>'.
 .
 This package provides html documentation suitable for browsing with a
 web-browser for the libraries included in the r-base package. It is not
 a required package as the same documentation is already included for
 on-line browsing.

Package: r-cran-ape
Description-md5: 166447854d6bd83748ad21a28b263aaa
Description-en: GNU R package for Analyses of Phylogenetics and Evolution
 This package provides functions for reading, writing, plotting, and
 manipulating phylogenetic trees, analyses of comparative data in a
 phylogenetic framework, ancestral character analyses, analyses of
 diversification and macroevolution, computing distances from DNA
 sequences, reading and writing nucleotide sequences as well as
 importing from BioConductor, and several tools such as Mantel's test,
 generalized skyline plots, graphical exploration of phylogenetic data
 (alex, trex, kronoviz), estimation of absolute evolutionary rates and
 clock-like trees using mean path lengths and penalized likelihood,
 dating trees with non-contemporaneous sequences, translating DNA into
 AA sequences, and assessing sequence alignments. Phylogeny estimation
 can be done with the NJ, BIONJ, ME, MVR, SDM, and triangle methods,
 and several methods handling incomplete distance matrices (NJ*,
 BIONJ*, MVR*, and the corresponding triangle method). Some functions
 call external applications (PhyML, Clustal, T-Coffee, Muscle) whose
 results are returned into R.

Package: r-cran-cachem
Description-md5: cd489a92be596f1266f1264a812fd63a
Description-en: cache GNU R objects with automatic pruning
 Key-value stores with automatic pruning. Caches can limit
 either their total size or the age of the oldest object (or both),
 automatically pruning objects to maintain the constraints.

Package: r-cran-chron
Description-md5: 161be4daab7463d5a577dbe083bbb08c
Description-en: GNU R package for chronologically ordered objects
 This package contains function for chronologically ordered objects
 to handle dates and time in GNU R.

Package: r-cran-classint
Description-md5: 7e760a6ebbc0bc78e58955b9a42045f5
Description-en: GNU R Choose Univariate Class Intervals
 This package provides selected commonly used methods for choosing
 univariate class intervals for mapping or other graphics purposes
 for GNU R.

Package: r-cran-conflicted
Description-md5: d189767dba08021f3bfbd0761eaea78d
Description-en: GNU R alternative conflict resolution strategy
 R's default conflict management system gives the most
 recently loaded package precedence. This can make it hard to detect
 conflicts, particularly when they arise because a package update
 creates ambiguity that did not previously exist. 'conflicted' takes a
 different approach, making every conflict an error and forcing you to
 choose which function to use.

Package: r-cran-conquer
Description-md5: c772aabccbc90420fcb6aba252008345
Description-en: GNU R package for convolution-type smoothed quantile regression
 The package offers fast and accurate convolution-type smoothed
 quantile regression. It is implemented using Barzilai-Borwein gradient
 descent with a Huber regression warm start. It constructs confidence
 intervals for regression coefficients using multiplier bootstrap.

Package: r-cran-data.table
Description-md5: 7873d6a5c1843ec61453a531c950be7a
Description-en: GNU R extension of Data.frame
 Fast aggregation of large data (e.g. 100GB in RAM), fast ordered joins,
 fast add/modify/delete of columns by group using no copies at all, list
 columns and a fast file reader (fread). Offers a natural and flexible
 syntax, for faster development.

Package: r-cran-dbplyr
Description-md5: 979e27b558653c0923c5b663de850fcc
Description-en: GNU R dplyr back end for databases
 GNU R dplyr back end for databases that allows you to work with
 remote database tables as if they are in-memory data frames. Basic features
 works with any database that has a 'DBI' back end; more advanced features
 require 'SQL' translation to be provided by the package author.

Package: r-cran-dplyr
Description-md5: ca032fb1826b546e64bfea05c660e700
Description-en: GNU R grammar of data manipulation
 This GNU R package provides a fast, consistent tool for working with
 data frame like objects, both in memory and out of memory.

Package: r-cran-dtplyr
Description-md5: 9c6ace862a5d202df1df773adcc09113
Description-en: GNU R data table back-end for 'dplyr'
 Provides a data.table backend for 'dplyr'. The goal of 'dtplyr'
 is to allow you to write 'dplyr' code that is automatically translated to
 the equivalent, but usually much faster, data.table code.

Package: r-cran-eipack
Description-md5: fd24bf875e273e731de39fa88792603a
Description-en: GNU R ecological inference and higher-dimension data management
 Provides methods for analyzing RxC ecological contingency
 tables using the extreme case analysis, ecological regression,
 and Multinomial-Dirichlet ecological inference models.  Also
 provides tools for manipulating higher-dimension data objects.

Package: r-cran-fastmap
Description-md5: a8133c81cb584c0f7dd8ec5562175b53
Description-en: GNU R fast implementation of a key-value store
 Fast implementation of a key-value store. Environments are commonly
 used as key-value stores, but every time a new key is used, it is added to
 R's global symbol table, causing a small amount of memory leakage. This can
 be problematic in cases where many different keys are used. Fastmap avoids
 this memory leak issue by implementing the map using data structures in C++.

Package: r-cran-fbasics
Description-md5: 9f576bd05c812a1f4ea199a51b434d3b
Description-en: GNU R package for financial engineering -- fBasics
 This package of functions for financial engineering and computational
 finance is part of Rmetrics, a collection of packages written and
 compiled by Diethelm Wuertz.
 .
 fBasics provides basic statistical tests, distributions and other tools
 used by many of the Rmetrics packages.

Package: r-cran-formula
Description-md5: 20d1356727c95b843b6f1ff89843b462
Description-en: GNU R package for extended model formulas
 The Formula package provides Infrastructure for extended formulas
 with multiple parts on the right-hand side and/or multiple responses
 on the left-hand side.

Package: r-cran-haven
Description-md5: 7dbc3f0821b676b643880e58e85399a2
Description-en: GNU R package to import/export SPSS, Stata and SAS files
 The goal of 'haven' is import foreign statistical formats into R via
 the embedded 'ReadStat' C library.

Package: r-cran-hmisc
Description-md5: 071f75a87f8f18a68654b258440b9117
Description-en: GNU R miscellaneous functions by Frank Harrell
 The Hmisc library contains many functions useful for data
 analysis, high-level graphics, utility operations, functions for
 computing sample size and power, translating SAS datasets,
 imputing missing values, advanced table making, variable clustering,
 character string manipulation, conversion of S objects to LaTeX code,
 recoding variables, and bootstrap repeated measures analysis.

Package: r-cran-httr
Description-md5: 15ebc0839801b4e4cea14ad6dee0a0d7
Description-en: GNU R tools for working with URLs and HTTP
 Useful tools for working with HTTP organised by HTTP verbs (GET(),
 POST(), etc). Configuration functions make it easy to control additional
 request components (authenticate(), add_headers() and so on).

Package: r-cran-hunspell
Description-md5: 1d0725009df8d2a97c0da198b937d199
Description-en: GNU R support for high-performance stemmer, tokenizer, and spell checker
 Low level spell checker and morphological analyzer based on the
 famous 'hunspell' library <https://hunspell.github.io>. The package can analyze
 or check individual words as well as parse text, LaTeX, html or xml documents.
 For a more user-friendly interface use the 'spelling' package which builds on
 this package to automate checking of files, documentation and vignettes in all
 common formats.

Package: r-cran-igraph
Description-md5: c0edf1c0f5abaa709b43bc1171497ff8
Description-en: GNU R network analysis and visualization
 This GNU R package provides routines for simple graphs and network
 analysis. igraph can handle large graphs very well and provides
 functions for generating random and regular graphs, graph visualization,
 centrality indices and much more.

Package: r-cran-mass
Description-md5: 1637487ae1fdcbcc075337db596a5348
Description-en: GNU R package of Venables and Ripley's MASS
 The MASS package provides functions and datasets to support the book
 'Modern Applied Statistics with S' (4th edition) by W.N. Venables and
 B.D. Ripley. The following URL provides more details about the book:
 URL: http://www.stats.ox.ac.uk/pub/MASS4

Package: r-cran-matchit
Description-md5: eb38c5b814371a9c56e064b45c858371
Description-en: GNU R package of nonparametric matching methods
 MatchIt implements the suggestions of Ho, Imai, King, and Stuart
 (2004) for improving parametric statistical models by preprocessing
 data with nonparametric matching methods.
 .
 MatchIt implements a wide range of sophisticated matching methods,
 making it possible to greatly reduce the dependence of causal
 inferences on hard-to-justify, but commonly made, statistical
 modeling assumptions. The software also easily fits into existing
 research practices since, after preprocessing with MatchIt,
 researchers can use whatever parametric model they would have used
 without MatchIt, but produce inferences with substantially more
 robustness and less sensitivity to modeling assumptions. MatchIt is
 an R program, and also works seamlessly within Zelig.

Package: r-cran-mgcv
Description-md5: 8cbc51e89d1ea8ef0b5b4a541dc1b898
Description-en: GNU R package for multiple parameter smoothing estimation
 This package provides functions for generalised additive models (GAMs)
 and other generalized ridge regression problems with multiple smoothing
 parameter selection by GCV or UBRE. It includes an implementation (not
 a clone) of gam().
 .
 This package is part of the set of packages that are 'recommended'
 by R Core and shipped with upstream source releases of R itself.

Package: r-cran-mvnfast
Description-md5: 1346688edbf09213235127b4f4e049e0
Description-en: GNU R fast multivariate normal and student's t methods
 Provides computationally efficient tools related to the multivariate
 normal and Student's t distributions. The main functionalities are:
 simulating multivariate random vectors, evaluating multivariate normal
 or Student's t densities and Mahalanobis distances. These tools are very
 efficient thanks to the use of C++ code and of the OpenMP API.

Package: r-cran-phytools
Description-md5: f66836da7553b77091704af997f63b10
Description-en: GNU R phylogenetic tools for comparative biology
 A wide range of functions for phylogenetic analysis. Functionality is
 concentrated in phylogenetic comparative biology, but also includes a
 diverse array of methods for visualizing, manipulating, reading or
 writing, and even inferring phylogenetic trees and data. Included among
 the functions in phylogenetic comparative biology are various for
 ancestral state reconstruction, model-fitting, simulation of phylogenies
 and data, and multivariate analysis. There are a broad range of plotting
 methods for phylogenies and comparative data which include, but are not
 restricted to, methods for mapping trait evolution on trees, for
 projecting trees into phenotypic space or a geographic map, and for
 visualizing correlated speciation between trees. Finally, there are a
 number of functions for reading, writing, analyzing, inferring,
 simulating, and manipulating phylogenetic trees and comparative data not
 covered by other packages. For instance, there are functions for
 randomly or non-randomly attaching species or clades to a phylogeny, for
 estimating supertrees or consensus phylogenies from a set, for
 simulating trees and phylogenetic data under a range of models, and for
 a wide variety of other manipulations and analyses that phylogenetic
 biologists might find useful in their research.

Package: r-cran-posterior
Description-md5: d0b2e2cd79cf33d96742c46004cd3c04
Description-en: GNU R tools for working with posterior distributions
 Provides useful tools for both users and developers of packages
 for fitting Bayesian models or working with output from Bayesian models.
 The primary goals of the package are to:
 (a) Efficiently convert between many different useful formats of
 draws (samples) from posterior or prior distributions.
 (b) Provide consistent methods for operations commonly performed on draws,
 for example, subsetting, binding, or mutating draws.
 (c) Provide various summaries of draws in convenient formats.
 (d) Provide lightweight implementations of state of the art posterior
 inference diagnostics. References: Vehtari et al. (2021)
 <doi:10.1214/20-BA1221>.

Package: r-cran-qpdf
Description-md5: dcf6445111f77e564ad2bef81093c770
Description-en: GNU R split, combine and compress PDF files
 Content-preserving transformations of PDF files such as split, combine,
 and compress. This package interfaces directly to the 'qpdf' C++ API
 and does not require any command line utilities. Note that 'qpdf' does
 not read actual content from PDF files: to extract text and data you
 need the 'pdftools' package.

Package: r-cran-recipes
Description-md5: cd7fdab093dd07718f27cfdb087cfce4
Description-en: GNU R preprocessing tools to create design matrices
 This GNU R package provides an extensible framework to create and
 preprocess design matrices. Recipes consist of one or more data
 manipulation and analysis "steps". Statistical parameters for the steps
 can be estimated from an initial data set and then applied to other data
 sets. The resulting design matrices can then be used as inputs into
 statistical or machine learning models.

Package: r-cran-rpact
Description-md5: ae9e21930639dc2208677921afc4429a
Description-en: Confirmatory Adaptive Clinical Trial Design and Analysis
 Design and analysis of confirmatory adaptive clinical trials with
 continuous, binary, and survival endpoints according to the methods
 described in the monograph by Wassmer and Brannath (2016). This
 includes classical group sequential as well as multi-stage adaptive
 hypotheses tests that are based on the combination testing principle.

Package: r-cran-rpostgresql
Description-md5: dd2711f500f22c8852d7e9b5346eec1a
Description-en: GNU R package providing database interface and driver for PostgreSQL
 This package provides a Database Interface (DBI) compliant driver
 for R to access PostgreSQL database systems.

Package: r-cran-rsqlite
Description-md5: 24a68b90bcc32afc4d3990d890b579b4
Description-en: Database Interface R driver for SQLite
 This package embeds the SQLite database engine in R and provides an interface
 compliant with the DBI package. This package is built with the SQLite package
 distributed in Debian, not with the copy included in the CRAN package.

Package: r-cran-rstan
Description-md5: a2598b9c408db224f70af4acf31c66e2
Description-en: GNU R interface to Stan
 User-facing R functions are provided to parse, compile, test, estimate,
 and analyze Stan models by accessing the header-only Stan library
 provided by the 'StanHeaders' package. The Stan project develops a
 probabilistic programming language that implements full Bayesian
 statistical inference via Markov Chain Monte Carlo, rough Bayesian
 inference via 'variational' approximation, and (optionally penalized)
 maximum likelihood estimation via optimization. In all three cases,
 automatic differentiation is used to quickly and accurately evaluate
 gradients without burdening the user with the need to derive the partial
 derivatives.

Package: r-cran-spatstat.linnet
Description-md5: 831bc121084fd9b4ab0f388368f24072
Description-en: linear networks functionality of the 'spatstat' family of GNU R
 Defines types of spatial data on a linear network and provides
 functionality for geometrical operations, data analysis and modelling
 of data on a linear network, in the 'spatstat' family of packages.
 Contains definitions and support for linear networks, including
 creation of networks, geometrical measurements, topological
 connectivity, geometrical operations such as inserting and deleting
 vertices, intersecting a network with another object, and interactive
 editing of networks. Data types defined on a network include point
 patterns, pixel images, functions, and tessellations. Exploratory
 methods include kernel estimation of intensity on a network, K-
 functions and pair correlation functions on a network, simulation
 envelopes, nearest neighbour distance and empty space distance,
 relative risk estimation with cross-validated bandwidth selection.
 Formal hypothesis tests of random pattern (chi-squared, Kolmogorov-
 Smirnov, Monte Carlo, Diggle-Cressie-Loosmore-Ford, Dao-Genton, two-
 stage Monte Carlo) and tests for covariate effects (Cox-Berman-Waller-
 Lawson, Kolmogorov-Smirnov, ANOVA) are also supported. Parametric
 models can be fitted to point pattern data using the function lppm()
 similar to glm(). Only Poisson models are implemented so far. Models
 may involve dependence on covariates and dependence on marks. Models
 are fitted by maximum likelihood. Fitted point process models can be
 simulated, automatically. Formal hypothesis tests of a fitted model are
 supported (likelihood ratio test, analysis of deviance, Monte Carlo
 tests) along with basic tools for model selection (stepwise(), AIC())
 and variable selection (sdr). Tools for validating the fitted model
 include simulation envelopes, residuals, residual plots and Q-Q plots,
 leverage and influence diagnostics, partial residuals, and added
 variable plots. Random point patterns on a network can be generated
 using a variety of models.

Package: r-cran-spatstat.model
Description-md5: d4142cce6152d84471fc865cae2a337d
Description-en: GNU R parametric statistical modelling for the 'spatstat' family
 Functionality for exploratory data analysis and nonparametric analysis
 of spatial data, mainly spatial point patterns, in the 'spatstat' family
 of packages. (Excludes analysis of spatial data on a linear network,
 which is covered by the separate package 'spatstat.linnet'.) Methods
 include quadrat counts, K-functions and their simulation envelopes,
 nearest neighbour distance and empty space statistics, Fry plots, pair
 correlation function, kernel smoothed intensity, relative risk
 estimation with cross-validated bandwidth selection, mark correlation
 functions, segregation indices, mark dependence diagnostics, and kernel
 estimates of covariate effects. Formal hypothesis tests of random
 pattern (chi-squared, Kolmogorov-Smirnov, Monte Carlo, Diggle-Cressie-Loosmore-
 Ford, Dao-Genton, two-stage Monte Carlo) and tests for covariate effects
 (Cox-Berman-Waller-Lawson, Kolmogorov-Smirnov, ANOVA) are also
 supported.

Package: r-cran-tikzdevice
Description-md5: 58c2294d97e360f35b88b3c50307cccf
Description-en: GNU R graphics output in LaTeX format
 This GNU R package provides a graphics output device for R that records
 plots in a LaTeX-friendly format. The device transforms plotting
 commands issued by R functions into LaTeX code blocks. When included in
 a LaTeX document, these blocks are interpreted with the help of 'TikZ'—a
 graphics package for TeX and friends written by Till Tantau. Using the
 'tikzDevice', the text of R plots can contain LaTeX commands such as
 mathematical formula. The device also allows arbitrary LaTeX code to be
 inserted into the output stream.

Package: r-cran-webfakes
Description-md5: c1ea99244ff1d23d5a27a1718854b04a
Description-en: fake Web Apps for HTTP testing of GNU R packages
 Create a web app that makes it easier to test web clients
 without using the internet. It includes a web app framework with path
 matching, parameters and templates. Can parse various 'HTTP' request
 bodies. Can send 'JSON' data or files from the disk. Includes a web app
 that implements the <https://httpbin.org> web service.

Package: r-cran-webgestaltr
Description-md5: 721be8cc518c444d7770c7cfd75924fb
Description-en: find over-represented properties in gene lists
 The web version WebGestalt <http://www.webgestalt.org> supports 12
 organisms, 354 gene identifiers and 321,251 function categories. Users
 can upload the data and functional categories with their own gene
 identifiers. In addition to the Over-Representation Analysis, WebGestalt
 also supports Gene Set Enrichment Analysis and Network Topology
 Analysis. The user-friendly output report allows interactive and
 efficient exploration of enrichment results. The WebGestaltR package not
 only supports all above functions but also can be integrated into other
 pipeline or simultaneously analyze multiple gene lists.

Package: r-cran-xslt
Description-md5: 5573bfaf952df9e3578e282e7d75f735
Description-en: extensible style-sheet language transformations for GNU R
 This GNU R package is an extension for the 'xml2' package to transform
 XML documents by applying an 'xslt' style-sheet.

Package: r-cran-xts
Description-md5: 4391f3ce1cfceaff89e5c5c20e46f6db
Description-en: GNU R package for time series analysis -- xts
 This package provide uniform handling of R's different time-based data
 classes by extending r-cran-zoo, maximizing native format information
 preservation and allowing for user level customization and extension, while
 simplifying cross-class interoperability.

Package: r-doc-html
Description-md5: 915d39f623bffdcd57d9a67a9e4f756a
Description-en: GNU R html manuals for statistical computing system
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available from
 CRAN, the Comprehensive R Archive Network, many also as Debian packages,
 named 'r-cran-<name>'.
 .
 This package provides the R manuals in html format. The sibling packages
 r-doc-pdf and r-doc-info provides the same manuals.

Package: r-doc-info
Description-md5: 473a7b2c67dab81cd13f242acf3f1254
Description-en: GNU R info manuals statistical computing system
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available from
 CRAN, the Comprehensive R Archive Network, many also as Debian packages,
 named 'r-cran-<name>'.
 .
 This package provides the R manuals in info format. The sibling packages
 r-doc-html and r-doc-pdf provide the same manuals.

Package: r-doc-pdf
Description-md5: 5726be4a4c2028d1d2bd9ee6122a0612
Description-en: GNU R pdf manuals for statistical computing system
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available from
 CRAN, the Comprehensive R Archive Network, many also as Debian packages,
 named 'r-cran-<name>'.
 .
 This package provides the R manuals in pdf format. The sibling packages
 r-doc-html and r-doc-info provides the same manuals.

Package: r-mathlib
Description-md5: fda173ca22c9952d304064d107a71c22
Description-en: GNU R standalone mathematics library
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available from
 CRAN, the Comprehensive R Archive Network, many also as Debian packages,
 named 'r-cran-<name>'.
 .
 This package provides the libRmath shared and static libraries which can
 be called from standalone C or C++ code.

Package: r-recommended
Description-md5: fa7931c821d7f86d0b3420906f4ab9a1
Description-en: GNU R collection of recommended packages [metapackage]
 R is a system for statistical computation and graphics.  It consists
 of a language plus a run-time environment with graphics, a debugger,
 access to certain system functions, and the ability to run programs
 stored in script files.
 .
 The design of R has been heavily influenced by two existing languages:
 Becker, Chambers & Wilks' S and Sussman's Scheme.  Whereas the
 resulting language is very similar in appearance to S, the underlying
 implementation and semantics are derived from Scheme.
 .
 The core of R is an interpreted computer language which allows
 branching and looping as well as modular programming using functions.
 Most of the user-visible functions in R are written in R.  It is
 possible for the user to interface to procedures written in the
 C, C++, or FORTRAN languages for efficiency, and many of R's core
 functions do so.  The R distribution contains functionality for a
 large number of statistical procedures and underlying applied math
 computations.  There is also a large set of functions which provide
 a flexible graphical environment for creating various kinds of data
 presentations.
 .
 Additionally, several thousand extension "packages" are available from
 CRAN, the Comprehensive R Archive Network, many also as Debian packages,
 named 'r-cran-<name>'.
 .
 This Debian package is now a metapackage that depends on a set of
 packages that are recommended by the upstream R core team as part of a
 complete R distribution, and distributed along with the source of R
 itself, as well as directly via the CRAN network of mirrors. This set
 comprises the following packages (listed in their upstream names):
  - KernSmooth: Functions for kernel smoothing for Wand & Jones (1995)
  - Matrix: Classes and methods for dense and sparse matrices and
    operations on them using Lapack and SuiteSparse
  - MASS, class, nnet and spatial: packages from Venables and Ripley,
    `Modern Applied Statistics with S' (4th edition).
  - boot: Bootstrap R (S-Plus) Functions from the book "Bootstrap Methods
    and Their Applications" by A.C. Davison and D.V. Hinkley (1997).
  - cluster: Functions for clustering (by Rousseeuw et al.)
  - codetools: Code analysis tools for R
  - foreign: Read data stored by Minitab, S, SAS, SPSS, Stata, ...
  - lattice: Implementation of Trellis (R) graphics
  - mgcv: Multiple smoothing parameter estimation and GAMs by GCV
  - nlme: Linear and nonlinear mixed effects models
  - rpart: Recursive partitioning and regression trees
  - survival: Survival analysis, including penalised likelihood.

Package: redis
Description-md5: 78a6a1a27b35b2a9388a817f91f05f71
Description-en: Persistent key-value database with network interface (metapackage)
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 The dataset is stored entirely in memory and periodically flushed to disk.
 .
 This package depends on the redis-server package.

Package: redis-sentinel
Description-md5: f4556dfa5cce22a246afed26179a780a
Description-en: Persistent key-value database with network interface (monitoring)
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 This package contains the Redis Sentinel monitoring software.

Package: redis-server
Description-md5: 9160ed1405585ab844f8750a9305d33f
Description-en: Persistent key-value database with network interface
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 The dataset is stored entirely in memory and periodically flushed to disk.

Package: redis-tools
Description-md5: 73e12355ae0942ddf9ddc6d068f95d50
Description-en: Persistent key-value database with network interface (client)
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 This package contains the command line client and other tools.

Package: rhino
Description-md5: c0634d81edf27589098e6ab9ae84198f
Description-en: JavaScript engine written in Java
 Rhino is an implementation of the JavaScript language written
 entirely in Java. It is typically embedded into Java applications to
 provide scripting to end users.

Package: roger-router
Description-md5: 9bb0ac2636b14376c6bd383ecc97b549
Description-en: Home router management tool - GUI
 Journal, Fax-Software and Call-Monitor for AVM FRITZ!Box or compatible
 routers. The following features are supported through plugins:
 .
  * Call monitor, journal and address book
  * Use system as softphone or dial support
  * Fax transfer with CUPS integration.
  * import address books from the Fritz!Box, Evolution and Thunderbird
  * status icon and notification popus
 .
 A predecessor to the program was formerly called FRITZ!Box Fun (ffgtk).
 This is the GUI version of the program including plugins.

Package: ruby-aliyun-sdk
Description-md5: 7aed2cae45b7a27b02424d1729a3029c
Description-en: Aliyun OSS SDK for Ruby
 Alibaba Cloud OSS SDK for Ruby is a Ruby client program for convenient access
 to Alibaba Cloud OSS (Object Storage Service) RESTful APIs.

Package: ruby-app-store-connect
Description-md5: 398be693d516035fc787b12a1de0a1b3
Description-en: Ruby interface to the App Store Connect API
 A Ruby interface to the App Store Connect API

Package: ruby-aws-sdk-core
Description-md5: 6626056ea4c7041a1fa4737ffd02d0ea
Description-en: AWS SDK for Ruby - Core
 Provides API clients for AWS. This gem is part of the official AWS SDK for
 Ruby.

Package: ruby-celluloid
Description-md5: 7410cd591431fe9d44e55aa8917f64fd
Description-en: actor-based concurrent object framework for ruby
 Celluloid provides a simple and natural way to build fault-tolerant concurrent
 programs in Ruby.
 .
 Celluloid enables people to build concurrent programs out of concurrent objects
 just as easily as they build sequential programs out of sequential objects.
 .
 Recommended for any developer, including novices, Celluloid should help ease
 your worries about building multithreaded Ruby programs.

Package: ruby-digest-crc
Description-md5: e691c68aaafbaa945d1df24e30c913c7
Description-en: Cyclic Redundancy Check (CRC) library for Ruby
 Adds support for calculating Cyclic Redundancy Check (CRC) to the Digest
 module.

Package: ruby-parallel
Description-md5: 740ec9fb40a63a9b8b7e74bc3c2fdc47
Description-en: library to run any kind of code in parallel processes
 This package provides a Ruby library to run any code in parallel Processes (in
 order to use all CPUs) or Threads (to speedup blocking operations).
 .
 This is best suited for map-reduce operations or e.g. parallel
 downloads or uploads.

Package: ruby-prometheus-client-mmap
Description-md5: 669ffb11940e826ce495f3a2562b37ed
Description-en: suite of instrumentation metric primitives
 These instrumentation metric primitives can be exposed through a web services
 interface. Intended to be used together with a Prometheus server.
 .
 This Prometheus library is fork of Prometheus Ruby Client that uses mmap'ed
 files to share metrics from multiple processes. This allows efficient metrics
 processing for Ruby web apps running in multiprocess setups like Unicorn.

Package: ruby-rspec-block-is-expected
Description-md5: d2f8342fb4f6da1431816ffd7de1515b
Description-en: Simplify testing of blocks in RSpec via block_is_expected
 subject { Integer(nil) }; it('raises') { block_is_expected.to
 raise_error(TypeError) }

Package: ruby-semver-dialects
Description-md5: 2d3e85e493ad8d4341e5706cfe5849f7
Description-en: utility function to process semantic versions expressed in different dialects
 This library helps to parse, process and compare semantic versions for Maven,
 NPM, PHP, RubyGems and Python packages.

Package: ruby-silent-stream
Description-md5: 3878767e0a3e7dfdcad22d02838e42e5
Description-en: ActiveSupport's Stream Silencing - Without ActiveSupport
 ActiveSupport Kernel Reporting Detritus
 with a few enhancements.
 Extraction of some parts of ActiveSupport's
 Kernel Reporting Core Extensions
 around silencing IO streams.

Package: ruby-telesign
Description-md5: 98b3548f204855b13a6451e693c3edf5
Description-en: TeleSign Ruby SDK
 TeleSign Ruby SDK lets you easily integrate with our REST API

Package: salmon
Description-md5: 2d4c57b85c974a51ce828b2205df95e8
Description-en: wicked-fast transcript quantification from RNA-seq data
 Salmon is a wicked-fast program to produce a highly-accurate, transcript-level
 quantification estimates from RNA-seq data. Salmon achieves is accuracy and
 speed via a number of different innovations, including the use of lightweight
 alignments (accurate but fast-to-compute proxies for traditional read
 alignments) and massively-parallel stochastic collapsed variational inference.
 The result is a versatile tool that fits nicely into many different pipelines.
 For example, you can choose to make use of the lightweight alignments by
 providing Salmon with raw sequencing reads, or, if it is more convenient, you
 can provide Salmon with regular alignments (e.g. computed with your favorite
 aligner), and it will use the same wicked-fast, state-of-the-art inference
 algorithm to estimate transcript-level abundances for your experiment.

Package: securefs
Description-md5: e933938b3632948b7bf3be4de8ccebfc
Description-en: Filesystem in userspace with transparent authenticated encryption
 securefs mounts a regular directory onto a mount point. The
 mount point appears as a regular filesystem, where one can
 read/write/create files, directories and symbolic links.
 The underlying directory will be automatically updated to
 contain the encrypted and authenticated contents.

Package: slic3r-prusa
Description-md5: 4ecde508b03e32ebfd9a86530ee9e238
Description-en: Transitional package for prusa-slicer
 PrusaSlicer converts digital 3D models into printing instructions (G-code)
 for your 3D printer. It cuts the model into horizontal slices (layers),
 generates toolpaths to fill them and calculates the amount of material
 to be extruded.
 .
 PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output
 G-code for several series of 3D printers, including RepRap, Ultimaker,
 Makerbot, as well as SVG files for DLP printers.
 .
 It can be used with a graphical interface, or in batch mode via the
 command-line.
 .
 This is a transitional package. It can safely be removed.

Package: slsh
Description-md5: da03b0012d9ccb8fd3c332515567d184
Description-en: Interpreter for S-Lang language
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains a stand-alone interpreter for scripts written
 in the S-Lang language.

Package: snowflake-client
Description-md5: dfd6c1ccb33f02f8a27af99842b1c15a
Description-en: WebRTC pluggable transport for Tor (client)
 Snowflake helps users circumvent censorship by making a WebRTC
 connection to volunteer proxies. These proxies relay Tor traffic to a
 Snowflake bridge and then to through the Tor network.
 .
 This package provides the client.

Package: snowflake-proxy
Description-md5: 89ccbccc1242a66948d321dfd0a4847f
Description-en: WebRTC pluggable transport for Tor (proxy)
 Snowflake helps users circumvent censorship by making a WebRTC
 connection to volunteer proxies. These proxies relay Tor traffic to a
 Snowflake bridge and then to through the Tor network.
 .
 This package provides the proxy.

Package: socklog
Description-md5: 9c1baf81e4e16b1dd60c6c9aef63b0db
Description-en: system and kernel logging services - binaries
 socklog cooperates with the runit package to create a small and
 secure replacement for rsyslog. socklog supports system logging
 through Unix domain sockets (/dev/log), UDP sockets (0.0.0.0:514), as
 well as TCP socket, with the help of runit's runsvdir, runsv, and
 svlogd. socklog provides a different network logging concept, and
 also does log event notification. svlogd has built in log file
 rotation based on file size, so there is no need for any cron jobs to
 rotate the logs. socklog is small, secure, and reliable.
 .
 This package contains the socklog binaries and manual pages.

Package: socklog-run
Description-md5: ff83493ae4bcfd2e204e5ecf7b81ee68
Description-en: system and kernel logging services - runit services
 socklog cooperates with the runit package to create a small and
 secure replacement for rsyslog. socklog supports system logging
 through Unix domain sockets (/dev/log), UDP sockets (0.0.0.0:514), as
 well as TCP socket, with the help of runit's runsvdir, runsv, and
 svlogd. socklog provides a different network logging concept, and
 also does log event notification. svlogd has built in log file
 rotation based on file size, so there is no need for any cron jobs to
 rotate the logs. socklog is small, secure, and reliable.
 .
 This package includes the configuration files to run socklog under
 runit supervision as system and kernel log daemons. The socklog-unix
 and socklog-klog services are enabled by default. The socklog-inet,
 socklog-notify, and socklog-ucspi-tcp services are examples and
 disabled by default.

Package: stress-ng
Description-md5: e4b37767e71cce0d013c8e30c3be093b
Description-en: tool to load and stress a computer
 stress-ng can stress various subsystems of a computer.  It can stress load
 CPU, cache, disk, memory, socket and pipe I/O, scheduling and much more.
 stress-ng is a re-write of the original stress tool by Amos Waterland but
 has many additional features such as specifying the number of bogo operations
 to run, execution metrics, a stress verification on memory and compute
 operations and considerably more stress mechanisms.

Package: subread
Description-md5: 2dc580306017678479e17e30f365b713
Description-en: toolkit for processing next-gen sequencing data
 Subread aligner can be used to align both gDNA-seq and RNA-seq reads.
 Subjunc aligner was specified designed for the detection of exon-exon
 junction. For the mapping of RNA-seq reads, Subread performs local
 alignments and Subjunc performs global alignments.

Package: subread-data
Description-md5: ce97b2286edd745f853d9e5692194176
Description-en: data files for subread package
 This package provides data files from the original tarball:
  - annotation: Directory including NCBI RefSeq gene annotations for
 genomes 'hg19', 'mm10' and 'mm9'. Each row is an exon.
 Entrez gene identifiers and chromosomal coordinates are provided for
 each exon.
  - test: Directory including test data and scripts.

Package: systemd-cron
Description-md5: 36b272e4814f3e0aec170736de5f9b3a
Description-en: systemd units to provide cron daemon & anacron functionality
 Provides systemd units to run cron jobs in /etc/cron.hourly cron.daily
 cron.weekly and cron.monthly directories, without having cron
 or anacron installed.
 It also provides a generator that dynamicaly translate /etc/crontab,
 /etc/cron.d/* and user cronjobs in systemd units.
 Please notice this package provide a different set of features
 than Vixie-cron; trying to remain as simple as possible.
 By example, to avoid to run process through a wrapper,
 but have instead systemd run those directly,
 it only send mails on error, including only a small blurb
 from the Journal; but doesn't send the full output of processes.

Package: thunderbird-gnome-support-dbg
Description-md5: 8fa21aaf02af881ccc7c33f8559e6531
Description-en: Email, RSS and newsgroup client - transitional package
 This is a transitional package to ensure that upgrades work correctly.
 It can be safely removed

Package: thunderbird-mozsymbols
Description-md5: ac1a6a5ccd00092e19efbf6f6f9538a0
Description-en: Email, RSS and newsgroup client - Breakpad symbols
 Thunderbird is a full-featured email, RSS and newsgroup client that makes
 emailing safer, faster and easier than ever before. It supports different mail
 accounts (POP, IMAP, Gmail), has a simple mail account setup wizard, one-
 click address book, tabbed interface, an integrated learning spam filter,
 advanced search and indexing capabilities, and offers easy organization
 of mails with tagging and virtual folders. It also features unrivalled
 extensibility.
 .
 This package contains the Firefox symbols in a format expected by Mozilla's
 Breakpad. Eventually this package should go away and the symbol upload be
 implemented in soyuz (or other builders that build this package)

Package: transmission
Description-md5: ad4c3a4546931273694cb4f642f5341d
Description-en: lightweight BitTorrent client
 Transmission is a set of lightweight BitTorrent clients (in GUI, CLI
 and daemon form). All its incarnations feature a very simple, intuitive
 interface on top on an efficient, cross-platform back-end.
 .
 This is just a metapackage depending on one of the front-end
 alternatives

Package: transmission-cli
Description-md5: 2bb621d0d95ecd3582f524eb28dbf71e
Description-en: lightweight BitTorrent client (command line programs)
 Transmission is a set of lightweight BitTorrent clients (in GUI, CLI
 and daemon form). All its incarnations feature a very simple, intuitive
 interface on top on an efficient, cross-platform back-end.
 .
 This package contains a (deprecated) stand-alone command-line client,
 transmission-remote to interface with transmission-daemon and tools to
 create, edit and inspect torrent files.

Package: transmission-daemon
Description-md5: c5796eb91f75285b9af0fb5f16136e5d
Description-en: lightweight BitTorrent client (daemon)
 Transmission is a set of lightweight BitTorrent clients (in GUI, CLI
 and daemon form). All its incarnations feature a very simple, intuitive
 interface on top on an efficient, cross-platform back-end.
 .
 This package contains the transmission-daemon. For the associated
 transmission-remote, see the package transmission-cli.

Package: transmission-qt
Description-md5: 55875b4734dfba52b8c3483949c1215e
Description-en: lightweight BitTorrent client (Qt interface)
 Transmission is a set of lightweight BitTorrent clients (in GUI, CLI
 and daemon form). All its incarnations feature a very simple, intuitive
 interface on top on an efficient, cross-platform back-end.
 .
 This package contains the Qt stand-alone client.

Package: trilinos-all-dev
Description-md5: 0283f81dd4eccfc62ec33075ee62607f
Description-en: object-oriented framework for large-scale problems - development files (ALL)
 The Trilinos Project is an effort to develop algorithms and enabling
 technologies within an object-oriented software framework for the
 solution of large-scale, complex multi-physics engineering and
 scientific problems. A unique design feature of Trilinos is its
 focus on packages.
 .
 This package depends on all Trilinos development packages.

Package: trilinos-dev
Description-md5: 1014135df0e0494b17d84c18d56d3bdb
Description-en: object-oriented framework for large-scale problems - development files
 The Trilinos Project is an effort to develop algorithms and enabling
 technologies within an object-oriented software framework for the
 solution of large-scale, complex multi-physics engineering and
 scientific problems. A unique design feature of Trilinos is its
 focus on packages.
 .
 This package contains the development header and some makefile templates.

Package: trilinos-doc
Description-md5: c82b0e9d648ffadfe6253c904200a1e1
Description-en: object-oriented framework for large-scale problems - documentation
 The Trilinos Project is an effort to develop algorithms and enabling
 technologies within an object-oriented software framework for the
 solution of large-scale, complex multi-physics engineering and
 scientific problems. A unique design feature of Trilinos is its
 focus on packages.
 .
 This is documentation for the Trilinos libraries in HTML format.
 Some pages point to header files provided in the corresponding -dev package,
 so it is suggested to install the latter as well.

Package: umockdev
Description-md5: 286db1dc230b4374b7e4132a74169450
Description-en: record/mock hardware devices for bug reports and regression tests
 umockdev mocks hardware devices for creating unit tests for libraries and
 programs that handle Linux hardware devices.
 .
 This package provides tools to record the properties and behaviour of
 particular devices, and to run a program or test suite under a test bed with
 the previously recorded devices loaded.
 .
 Right now this covers sysfs, uevents, basic support for /dev devices, and
 recording/mocking usbdevfs ioctls (for PtP/MTP devices).
 .
 With this you can simulate particular hardware in virtual environments up to
 some degree, without needing any particular privileges or disturbing the whole
 system.

Package: virtiofsd
Description-md5: e96fb3b03e22bd9f7749d474cd901a23
Description-en: Virtio-fs vhost-user device daemon
 virtiofsd is a daemon for sharing host directories with a virtual machine or
 other guest using virtio-fs. It is designed to work with QEMU’s --device
 vhost-user-fs-pci but should work with any virtual machine monitor (VMM) that
 supports vhost-user.

Package: vmdb2
Description-md5: e16ea9087912df6e6fa120f7246e631a
Description-en: creator of disk images with Debian installed
 vmdb2 will be a successor of vmdebootstrap. It will create disk images
 for virtual machines and real hardware, with partitioning, and a boot
 loader, and a Debian installation.

Package: wine-development
Description-md5: 139da20fbef0c3dd79adf5ac1f0975f8
Description-en: Windows API implementation - standard suite
 Wine is a free MS-Windows API implementation.
 .
 This package provides essential wrappers and convenience tools for the
 standard Wine components. It also employs the Debian alternatives system to
 provide the usual command names, e.g. "wine" instead of "wine-development".

Package: wine64-development
Description-md5: 54c9838740378ccb14f94eb5ac802f63
Description-en: Windows API implementation - 64-bit binary loader
 Wine is a free MS-Windows API implementation.
 .
 This package provides the binary loader for 64-bit Windows applications.

Package: wine64-development-preloader
Description-md5: 69498f9ec1c6b32adf50641cc3a6ba4c
Description-en: Windows API implementation - prelinked 64-bit binary loader
 Wine is a free MS-Windows API implementation.
 .
 This package provides the prelinked loader for 64-bit Windows applications.

Package: wine64-development-tools
Description-md5: 7f1bd7babff1d0228d2a02bd58dedb25
Description-en: Windows API implementation - 64-bit developer tools
 Wine is a free MS-Windows API implementation.
 .
 This package provides Wine's 64-bit developer tools. They are capable of
 generating both 32- and 64-bit results.

Package: winetricks
Description-md5: 4efe4d2cbe110743095197ee41a22e2b
Description-en: simple tool to work around common problems in Wine
 Winetricks lets you install missing DLLs or tweak various Wine settings
 individually.  It also has a menu of supported games/apps for which it
 can do all the workarounds automatically.
 .
 It can be used via GUI or commandline, whichever you prefer; the
 commandline mode is particularly useful as a building block in fancier
 wine frontends and in automated regression testing.

Package: woof-doom
Description-md5: bc8da02b78df790cdf19f30cd38e28f6
Description-en: Doom source port MBF targeted at modern systems
 Woof! is a continuation of Lee Killough's Doom source port MBF
 targeted at modern systems.
 .
 MBF stands for "Marine's Best Friend" and is widely regarded as the
 successor of the Boom source port by TeamTNT. It serves as the code
 base for popular Doom source ports such as PrBoom+/DSDA-Doom or The
 Eternity Engine. As the original engine was limited to run only under
 MS-DOS, it has been ported to Windows by Team Eternity under the name
 WinMBF in 2004. Woof! is developed based on the WinMBF code with the
 aim to make MBF more widely available and convenient to use on modern
 systems.
 .
 To achieve this goal, this source port is less strict regarding its
 faithfulness to the original MBF. It is focused on quality-of-life
 enhancements, bug fixes and compatibility improvements. However, all
 changes have been introduced in good faith that they are in line with
 the original author's intentions and even for the trained eye, this
 source port should still look very familiar to the original MBF.
 .
 In summary, this project's goal is to forward-port MBF.EXE from DOS to
 21st century and remove all the stumbling blocks on the way.
 Furthermore, just as MBF was ahead of its time, this project dedicates
 itself to early adoption of new modding features such as
 DEHEXTRA+DSDHacked, UMAPINFO and MBF21.

Package: xmaxima
Description-md5: 832404665e6cce169548e4687edf6d5a
Description-en: Computer algebra system -- x interface
 Maxima is a fully symbolic computation program.  It is full featured
 doing symbolic manipulation of polynomials, matrices, rational
 functions, integration, Todd-coxeter methods for finite group
 analysis, graphing, multiple precision floating point computation.
 It has a symbolic source level debugger for maxima code.  Maxima is
 based on the original Macsyma developed at MIT in the 1970s.  It is
 quite reliable, and has good garbage collection, and no memory leaks.
 It comes with hundreds of self tests.
 .
 This package contains an X Windows interface using the tcl/tk
 libraries.

Package: xul-ext-calendar-timezones
Description-md5: aa51586667f70f4444de07214c475b6d
Description-en: Calendar Extension for Thunderbird (transitional package)
 This is a transitional package to ensure that upgrades work correctly.
 It can be safely removed

Package: xul-ext-gdata-provider
Description-md5: aa51586667f70f4444de07214c475b6d
Description-en: Calendar Extension for Thunderbird (transitional package)
 This is a transitional package to ensure that upgrades work correctly.
 It can be safely removed

Package: xul-ext-lightning
Description-md5: aa51586667f70f4444de07214c475b6d
Description-en: Calendar Extension for Thunderbird (transitional package)
 This is a transitional package to ensure that upgrades work correctly.
 It can be safely removed

Package: yosys-plugin-ghdl
Description-md5: 0a87614ab38798107329009f5d312922
Description-en: VHDL to RTL synthesis plugin using GHDL
 This yosys plugin allows running RTL synthesis from VHDL source code
 instead of yosys' native Verilog.
 .
 This allows a full synthesis flow from VHDL to hardware for FPGAs where
 the GHDL compiler is used to analyse the VHDL sources and yosys is used to
 perform logic optimization, technology mapping and convertion to netlist
 format.

Package: zulucrypt-cli
Description-md5: 8776bc4b264928d0a46995af3b7b334b
Description-en: tool for encrypting volumes
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 zulucrypt-cli is a command line interface frontend
 to cryptsetup and tcplay and it is a tool that
 make it easy to manage LUKS, PLAIN and TRUECRYPT
 encrypted volumes. With one command you can encrypt
 a volume. Without zulucrypt-cli would be multiple
 commands needed to achieve the same result.

Package: zulucrypt-gui
Description-md5: f4172756adcde7533ace4eab972460f8
Description-en: graphical front end for zulucrypt-cli
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 zulucrypt-gui is a front end for zulucrypt-cli.
 This way all activities can be performed easily
 by the graphical interface.

Package: zulumount-cli
Description-md5: febbf9500ead0cfe9d7bf10965ad0ef7
Description-en: tool that manages encrypted volumes
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 zulumount-cli is a command line interface that has
 a primary mission of opening and closing encrypted
 volumes as well as mounting and unmounting unencrypted
 volumes and opened encrypted ones. Its primary
 purpose is to do what tools like udisks does.

Package: zulumount-gui
Description-md5: 746afd29dc50507c0e8a1fa7d5a7ddb4
Description-en: graphical front end for zulumount-cli
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 zuluMount-gui is a front end for zuluMount-cli.
 This way all activities the zulumount-cli can
 be performed easily by the graphical interface.
 .
 zuluMount-gui can unlock cryfs, encfs, gocryptfs
 and ecryptfs.

Package: zulupolkit
Description-md5: 499c52c8ae166e9e3ad52c39a7377c02
Description-en: tool to execute privileged operations
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 zulupolkit is the cli component that runs privileged
 and works between CLI and GUI components to provides
 privileged operations for GUI components.

Package: zulusafe-cli
Description-md5: 0af88f32298465c0f3876b1eb5646c68
Description-en: cli that manages encrypted volumes
 zulucrypt is a suite of applications for creating
 and managing volumes encrypted with luks, plain,
 truecrypt and veracrypt.
 .
 zulusafe-cli is a tool responsible for the safe
 storage files in a wallet. Added files to the
 wallet will be stored in a secured file located
 at "~/.config/lxqt/wallets/zuluSafe/YYY.lwt"
 where YYY is the wallet name.

Package: calligra-gemini
Description-md5: e156dccbd8762e0bf3c51b08fa15e113
Description-en: unified interface for stage and words
 Calligra Gemini provide a unified applications which combines
 traditional desktop application and touch friendly interface for
 the Words and Stage components.
 .
 This package is part of the Calligra Suite.

Package: calligra-libs
Description-md5: bd711fec00d4e12eb191529df959aaf2
Description-en: common libraries and binaries for the Calligra Suite
 This package provides the libraries and binaries that are shared amongst
 the various components of Calligra.
 .
 This package is part of the Calligra Suite.

Package: calligrasheets
Description-md5: 2d8660804f7fda925c09df2937712c47
Description-en: spreadsheet for the Calligra Suite
 Tables is a powerful spreadsheet application.  It is scriptable and
 provides both table-oriented sheets and support for complex mathematical
 formulae and statistics. It is the successor of KSpread.
 .
 This package is part of the Calligra Suite.

Package: calligrastage
Description-md5: 4b8f690fc43fe1ca4190000d83114c16
Description-en: presentation program for the Calligra Suite
 Stage is an easy to use yet still flexible presentation application. You can
 easily create presentations containing a rich variety of elements, from
 graphics to text, from charts to images. Stage is extensible through a
 plugin system, so it is easy to add new effects, new content elements or even
 new ways of managing your presentation.
 .
 Stage natively uses the OpenDocument file format standard, for easy
 interchange with all ODF supporting applications, which includes Microsoft
 Office. Examples of its easy-to-use features are support for layouts, a
 special slide overview view during presentations for the presenter, support
 for many different master sliders in one presentation, cool transitions and
 a useful notes feature.
 .
 This package is part of the Calligra Suite.

Package: calligrawords
Description-md5: e8c718ad734d42503998d607ce115062
Description-en: word processor for the Calligra Suite
 Words is a FrameMaker-like word processing and desktop publishing
 application. It is capable of creating polished and professional
 looking documents. It can be used for desktop publishing, but also for
 "normal" word processing, like writing letters, reports and so on.
 .
 This package is part of the Calligra Suite.

Package: delve
Description-md5: d406f71ed83cbc3be83251e4d732cac5
Description-en: debugger for the Go programming language
 Delve enables you to interact with your program by controlling the execution
 of the process, evaluating variables, and providing information of
 thread/goroutine state, CPU register state and more.

Package: git-annex
Description-md5: 88efc7abdf2a743a6caeeb3db7c83733
Description-en: manage files with git, without checking their contents into git
 git-annex allows managing large files with git, without storing the file
 contents in git. It can sync, backup, and archive your data, offline
 and online. Checksums and encryption keep your data safe and secure. Bring
 the power and distributed nature of git to bear on your large files with
 git-annex.
 .
 It can store large files in many places, from local hard drives, to a
 large number of cloud storage services, including S3, WebDAV,
 and rsync, with dozens of cloud storage providers usable via plugins.
 Files can be stored encrypted with gpg, so that the cloud storage
 provider cannot see your data. git-annex keeps track of where each file
 is stored, so it knows how many copies are available, and has many
 facilities to ensure your data is preserved.
 .
 git-annex can also be used to keep a folder in sync between computers,
 noticing when files are changed, and automatically committing them
 to git and transferring them to other computers. The git-annex webapp
 makes it easy to set up and use git-annex this way.

Package: karbon
Description-md5: c543dbc851e9639d2f9bd45d7103ac4e
Description-en: vector graphics application for the Calligra Suite
 Karbon is a vector drawing application with an user interface that is easy to
 use, highly customizable and extensible. That makes Karbon a great application
 for users starting to explore the world of vector graphics as well as for
 artists wanting to create breathtaking vector art. Features include:
 .
  * Loading support for ODG, SVG, WMF, WPG, EPS/PS
  * Writing support for ODG, SVG, WMF, PNG, PDF
  * Customizable user interface with freely placeable toolbars and dockers
  * Layer docker for easy handling of complex documents including preview
    thumbnails, support for grouping shapes via drag and drop,
    controlling visibility of shapes or locking
  * Advanced path editing tool with great on-canvas editing capabilities
  * Various drawing tools for creating path shapes including a draw path
    tool and a pencil tool, as well as a calligraphy drawing tool
  * Gradient and pattern tools for easy on-canvas editing of gradient and
    pattern styles
  * Top notch snapping facilities for guided drawing and editing (e.g.
    snapping to grid, guide lines, path nodes, bounding boxes, orthogonal
    positions, intersections of path shapes or extensions of lines and
    paths)
  * Many predefined basic shapes included, such as circle/ellipse, star or
    rectangle
  * Artistic text shape with support for following path outlines
    (i.e. text on path)
  * Complex path operations and effects like Boolean set operations,
    path flattening, rounding and refining as well as whirl/pinch effects
  * Extensible by writing plugins for new tools, shapes and dockers
 .
 This package is part of the Calligra Suite.

Package: kickpass
Description-md5: 16cbfa663e00426e17ba415876508861
Description-en: simple password safe
 It keep each password  in a specific safe, protected with modern cryptography.
 Command line interface is splited into different command.
 .
 It has features like:
   * One password to rule them all;
   * Oone password to find them;
   * One password to bring them all
   * Integrated password generator;
   * Full text  metadata with your favorite editor;
   * Direct copy to X selection and clipboard;
   * Strong encryption: AEAD with chacha20 and poly1305.

Package: libkickpass-dev
Description-md5: 1f46430054c8c3b6ee89ef8273af5d23
Description-en: library used by kickpass (development files)
 Kickpass is built around this shared library. libkickpass leverage libsodium
 to create safes. Safes are created using authenticated encryption with
 associated data. As of now libkickpass use chacha20 along with poly1305 to
 encrypt and authenticate the safe.
 .
 This package provides the development files.

Package: libkickpass0
Description-md5: 02ba86ba4e0d1083544ffb8e43a713ab
Description-en: library used by kickpass
 Kickpass is built around this shared library. libkickpass leverage libsodium
 to create safes. Safes are created using authenticated encryption with
 associated data. As of now libkickpass use chacha20 along with poly1305 to
 encrypt and authenticate the safe.

Package: okular-backend-odp
Description-md5: b35a667ad1ed048d126b2bff8bf907af
Description-en: Okular backend for ODP documents
 This package provides a backend for Okular to view OpenDocument Presentation
 (ODP) documents, but also PowerPoint and PPTX documents.
 .
 This package is part of the Calligra Suite.

Package: okular-backend-odt
Description-md5: 4cdcf0582561c0f594bb6ce736fd3e58
Description-en: Okular backend for ODT documents
 This package provides a backend for Okular to view OpenDocument Text
 (ODT) documents, but also DOC, DOCX, RTF and WPD documents.
 .
 This package is part of the Calligra Suite.

Package: eztrace
Description-md5: e1dc5c0f13d8ddd27c1ffd5e0fa052bf
Description-en: Automatic execution trace generation for HPC - tools
 EZTrace is a tool that aims at generating automatically execution traces
 from HPC (High Performance Computing) programs. It generates execution
 trace files that can be interpreted by visualization tools such as
 ViTE. It uses LD_PRELOAD and dlsym() to intercept calls to the usual HPC
 primitives, to be observed.
 .
 This package contains the tools.

Package: ges1.0-tools
Description-md5: c59e8d2cae5d7d4114d74760a82cde3f
Description-en: Tools for use with the GStreamer editing services
 The GStreamer multimedia framework and the accompanying NLE set of
 plugins for non-linear editing offer all the building blocks for:
 * Decoding and encoding to a wide variety of formats, through all the
   available GStreamer plugins.
 * Easily choosing segments of streams and arranging them through time
   through the NLE set of plugins.
 But all those building blocks only offer stream-level access, which
 results in developers who want to write non-linear editors to write a
 consequent amount of code to get to the level of non-linear editing
 notions which are closer and more meaningful for the end-user
 (and therefore the application).
 .
 The GStreamer Editing Services (GES) aims to fill the gap between
 GStreamer/NLE and the application developer by offering a series
 of classes to simplify the creation of many kind of editing-related
 applications.
 .
 This package contains command-line tools for GStreamer editing
 services.

Package: gir1.2-ges-1.0
Description-md5: 6becd314b8c159acf979f724d8fa3df7
Description-en: GObject introspection data for the GES library
 The GStreamer multimedia framework and the accompanying NLE set of
 plugins for non-linear editing offer all the building blocks for:
 * Decoding and encoding to a wide variety of formats, through all the
   available GStreamer plugins.
 * Easily choosing segments of streams and arranging them through time
   through the NLE set of plugins.
 But all those building blocks only offer stream-level access, which
 results in developers who want to write non-linear editors to write a
 consequent amount of code to get to the level of non-linear editing
 notions which are closer and more meaningful for the end-user
 (and therefore the application).
 .
 The GStreamer Editing Services (GES) aims to fill the gap between
 GStreamer/NLE and the application developer by offering a series
 of classes to simplify the creation of many kind of editing-related
 applications.
 .
 This package contains introspection data for the GStreamer editing
 services.

Package: libeztrace-dev
Description-md5: fa869525a5354c44bf2db0d4c3a520cc
Description-en: Automatic execution trace generation for HPC - development files
 EZTrace is a tool that aims at generating automatically execution traces
 from HPC (High Performance Computing) programs. It generates execution
 trace files that can be interpreted by visualization tools such as
 ViTE. It uses LD_PRELOAD and dlsym() to intercept calls to the usual HPC
 primitives, to be observed.
 .
 This package contains the development files.

Package: libeztrace0
Description-md5: 72d91f068e85b3fa50d696af4c3a4224
Description-en: Automatic execution trace generation for HPC - runtime libraries
 EZTrace is a tool that aims at generating automatically execution traces
 from HPC (High Performance Computing) programs. It generates execution
 trace files that can be interpreted by visualization tools such as
 ViTE. It uses LD_PRELOAD and dlsym() to intercept calls to the usual HPC
 primitives, to be observed.
 .
 This package contains the development files.

Package: libges-1.0-0
Description-md5: de28b750b9b6e559b75ec37765eea314
Description-en: GStreamer editing services (shared library)
 The GStreamer multimedia framework and the accompanying NLE set of
 plugins for non-linear editing offer all the building blocks for:
 * Decoding and encoding to a wide variety of formats, through all the
   available GStreamer plugins.
 * Easily choosing segments of streams and arranging them through time
   through the NLE set of plugins.
 But all those building blocks only offer stream-level access, which
 results in developers who want to write non-linear editors to write a
 consequent amount of code to get to the level of non-linear editing
 notions which are closer and more meaningful for the end-user
 (and therefore the application).
 .
 The GStreamer Editing Services (GES) aims to fill the gap between
 GStreamer/NLE and the application developer by offering a series
 of classes to simplify the creation of many kind of editing-related
 applications.
 .
 This package contains the shared library for the GStreamer editing
 services.

Package: libges-1.0-dev
Description-md5: 74b2379c8aaad1a31d6e1510697d736e
Description-en: GStreamer editing services (development files)
 The GStreamer multimedia framework and the accompanying NLE set of
 plugins for non-linear editing offer all the building blocks for:
 * Decoding and encoding to a wide variety of formats, through all the
   available GStreamer plugins.
 * Easily choosing segments of streams and arranging them through time
   through the NLE set of plugins.
 But all those building blocks only offer stream-level access, which
 results in developers who want to write non-linear editors to write a
 consequent amount of code to get to the level of non-linear editing
 notions which are closer and more meaningful for the end-user
 (and therefore the application).
 .
 The GStreamer Editing Services (GES) aims to fill the gap between
 GStreamer/NLE and the application developer by offering a series
 of classes to simplify the creation of many kind of editing-related
 applications.
 .
 This package contains development files for the GStreamer
 editing services.

Package: wine32-development
Description-md5: 6f28cbab79bb4fb84526de688bbbb0dc
Description-en: Windows API implementation - 32-bit binary loader
 Wine is a free MS-Windows API implementation.
 .
 This package provides the binary loader for 32-bit Windows applications.

Package: wine32-development-preloader
Description-md5: 119d146ee6d0a5c98595d4bc824e95a7
Description-en: Windows API implementation - prelinked 32-bit binary loader
 Wine is a free MS-Windows API implementation.
 .
 This package provides the prelinked loader for 32-bit Windows applications.

Package: wine32-development-tools
Description-md5: ad5c80d7c4e68fb2b9a14646e195ed9e
Description-en: Windows API implementation - 32-bit developer tools
 Wine is a free MS-Windows API implementation.
 .
 This package provides Wine's 32-bit developer tools. They are capable of
 generating 32-bit results.

Package: librust-tokio-executor-dev
Description-md5: 1d0777a6d4941c1d599a024b61bd87bb
Description-en: Future execution primitives - Rust source code
 This package contains the source for the Rust tokio-executor crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: librust-xkbcommon-dev
Description-md5: 4fe9744260eb08d1187b7a5835e6b391
Description-en: Rust bindings and wrappers for libxkbcommon - Rust source code
 This package contains the source for the Rust xkbcommon crate, packaged by
 debcargo for use with cargo and dh-cargo.

Package: netlabel-tools
Description-md5: c34a9c6dc669e03e4de3a6aeac234e2b
Description-en: management tool for the Linux NetLabel Subsystem
 The NetLabel management utility, netlabelctl, is a command line program
 designed to allow system administrators to configure the NetLabel system in
 the kernel.
 .
 This package requires that the running kernel supports NETLABEL.

Package: pinball-table-gnu
Description-md5: c3ed62ecf9f895359d59b9c06d5bb0c9
Description-en: GNU Pinball table for emilia pinball
 Another pinball table to have fun, behaviour plugin.
 The table is dedicated to GNU project.
 It features multiballs, magnets and bumpers.

Package: libgatk-bwamem-jni
Description-md5: 45fd8401627d32a5ea212067195b67e4
Description-en: interface to call Heng Li's bwa mem aligner from Java code (jni)
 BWA (Burrows-Wheeler Aligner) is a software package for mapping low-divergent
 sequences against a large reference genome, such as the human genome. It is
 written in C.
 .
 gatk-bwamem provides a Java library and a shared library to allow one to use
 BWA from Java code.
 .
 This package contains the native library.

Package: libintelrdfpmath-dev
Description-md5: eae64e804251a27e96fc83f07c804324
Description-en: Intel Decimal Floating-Point Math Library
 Software implementation of the IEEE 754-2008 Decimal Floating-Point
 Arithmetic specification, aimed at financial applications, especially
 in cases where legal requirements make it necessary to use decimal, and
 not binary floating-point arithmetic (as computation performed with
 binary floating-point operations may introduce small, but unacceptable
 errors).
 .
 This library is only fully supported on amd64, i386, and ia64. It
 builds on several other Debian architectures, but you should check
 the test results to determine whether it is suitable for your
 purposes.

Package: librust-tokio-reactor-dev
Description-md5: 07eabb320ba20cc7e0ec5ba4953b5dff
Description-en: Event loop that drives Tokio I/O resources - Rust source code
 This package contains the source for the Rust tokio-reactor crate, packaged by
 debcargo for use with cargo and dh-cargo.