webmockr (#149) (#150)enable()/disable() (#146) thanks @hadleyRequestPattern is still exported in
this version, but will not be in the next versioncrul from Imports to Suggests. replace use of a
crul function with an equivalent from curl so
crul is truly not needed to run wemockr unless
using crulstub_request() if an error occurred in a pipe chain, or
non-pipe flow, the stub prior to the error remained. This was not
correct behavior from a logical perspective - i.e., one would expect if
an error occurred that thing they were trying to do did not stick
around. The new behavior as of this version deletes the stub upon any
error during its creation. Under the hood we’re using
withCallingHandlers to handle different types of errors,
throw warnings, etc.including() and
excluding() for use with wi_th() support
partial for bodies and queries (header partial matching was already
supported without any additional steps). See ?partial. This
makes it slightly to a whole lot easier to do matching depending on the
HTTP request your trying to match (e.g., let’s say you’re trying to
match against a query with 20 parameters - if you can match uniquely to
it with 1 or 2 of those params, then you’re all set) (#38)RequestPattern. Shouldn’t
change behavior (#133)webmockr_configure(show_body_diff = TRUE) or
webmockr_configure(show_body_diff = FALSE). Second, a new
function stub_body_diff() is a standalone function that
compares by default the last stub created and the last http request made
- but you can pass in any stub and http request. Note that body diffing
functionality requires the suggested package diffobj
(#126)last_request() and last_stub(),
which get the last http request made and the last webmockr stub created,
respectively. (#126)global_stubs field from the
StubRegistry class as it was completely unused (holdover
from the initial port from Ruby). Should not impact users at all.
(#127)rlang functions throughout the package for
nicer assertions and condition handling. This change alters the main
error message you get when there’s no match to registered stubs.
Hopefully this feels like an improvement to you; let me know.
(#129)StubRegistry gains new method is_stubbed()
to check if a stub is in the stub registrywebmockr now supports the httr2 library,
in addition to httr and crul. Note that you’ll
see different behavior from httr2 relative to the other 2
http clients because it turns http errors (http statuses 400 and above)
into R errors (#122)webmockr can now mock async http requests with
crul (w/ crul v1.5 or greater). no change was
required in webmockr for this to happen. a PR was merged in
crul to hook into webmockr. there’s no support
for async in httr as that package does not do any async and
no support in httr2 because
req_perform_parallel does not have a mocking hook as does
req_perform (#124)to_return() supports returning multiple responses to
match many requests to the same matching stub. however, the internals
were broken for this, but is now fixed (#115) thanks @kenahoo for the
reportstub_request('post', 'https://httpbin.org/post') %>% wi_th(body = list(a=5)))
was not working in some cases; internal matching logic was borked. now
fixed. (#118) thanks @konradoberwimmer for the
reportstatus parameter in to_return() was
documented to accept an integer, but it errored when an integer was
passed (e.g., to_return(status=200L)). This bug is now
fixed (#117) thanks @maelle for the reportwebmockr_configure()).
Three options that were present but not implemented are now removed:
show_body_diff, query_values_notation,
net_http_connect_on_start. One option that was present but
not implemented yet is now implemented:
show_stubbing_instructions (#27) (#120)StubCounter added to pkgdown docs page at https://docs.ropensci.org/webmockr/reference/StubCounter.html
(#119) @maelleUriPattern to make sure regex matching is
working as intended (#114) thanks @kenahooenable() and the enable() method on the
Adapter R6 class gain new parameter quiet to
toggle whether messages are printed or not (#112)to_raise() and to_return() to explain the
difference between them and when you may want to use them (#100)wi_th() now supports basic_auth to mock basic
authentication either with crul::auth() or
httr::authenticate() (#108)to_return() one creating a stub, or if you want to return
the same response each time, you can use the new times
parameter within to_return(). As a related use case (#31)
you can mock http retry’s using this new feature (#10) (#32) (#101)webmockr_reset() to be able to reset
stub registry and request registry in one function call (#97)
(#101)wi_th() now accepts basic_auth in addition to
query, body, and headers. Note that authentication type is ignored
(#103)stub_request(): we
weren’t allowing matching URI’s without schemes; you can now do that. In
addition, webmockr can match URI’s without the “http” scheme, but does
not match if the scheme is “https”. See UriPattern for more
(#102)write_disk_path behavior was correct when
using httr, seems to be working, added tests for it (#79)wi_th() are now
all coerced to character class to make sure that all comparisons of
stubs and requests are done with the same class (character) (#107)uri_regex usage in stub_request():
no longer curl escape the uri_regex given, only escape a
non-regex uri (#106)CrulAdapter: do not use
normalizePath on the write_disk_path path so
that relative paths are not changed to full paths - added tests for this
(#95) (#96)Adapter class to consolidate common code for the
HttrAdapter and CrulAdapter classes, which
inherit from Adapter; not a user facing change (#87)write_disk_path is NULL when the user is
trying to write to disk while using webmockr (#78)set_body() method in the Response
class - handle cases where user writing to disk and not, and handle raw
bytes correctly (#80)to_s() method in StubbedRequest
class - was formatting query parameters incorrectly (#83)BodyPattern class to handle upload objects in a
list; related issue fixed where wi_th() parameter
body was not handling upload objects (#84) (#85)handle_request() to skip vcr-related code
unless a cassette is inserted (#86) (#88)webmockr now supports mocking writing to disk. TLDR:
see ?mocking-disk-writing to get started - That is, both of
the major high level http clients in R, crul and httr, support writing
directly to disk (rather than the user manually getting the http
response and writing it to disk). supporting this required quite a bit
of work, both in code and in thinking about how to support the various
scenarios in which users can find themselves when dealing with writing
to disk - Please get in touch if you have problems with this (#57)
(#76)request_registry_clear() method to easily clear
all requests in the request registry (#75)to_return_() and
wi_th_() are defunct (#60) (#64)to_return() gains parameter .list (#60)
(#64)StubbedRequest, to have better behavior for very long
strings such as in headers and bodies (#63)httr response object to match the
date format that httr uses in real HTTP requests (#58)
(#61) via https://github.com/ropensci/vcr/issues/91httr response objects.
httr makes the list of headers insensitive to case, so we
now use that function from the package (#59) (#61)to_return() and wi_th() drop use of the
lazyeval package and fall back to using the simple
list(...) - fixes problem where creating stubs was failing
within test_that() blocks due to some weird lazy eval
conflicts (i think) (#60) (#64) thanks @karawoo !crul and httr. now fixed. (#49) thanks @hlappvcr if vcr is not
available (#53)response_headers_all
slot (#51) (#54)request_registry() and
stub_registry() print methods more similar to avoid
confusion for users (#35)enable/disable to indicate
that crul and httr supported (#46) (related to
#45)requireNamespace so only
run when httr available.onLoad call, removing commented out code, and
add note about creating adapter objects does not load crul and httr
packagesenable() and disable() methods.
even though httr is in Suggests, we were loading all
adapters (crul, httr) with stop when the package was not
found. We now give a message and skip when a package not installed. In
addition, we enable() and disable() gain an
adapter parameter to indicate which package you want to
enable or disable. If adapter not given we attempt all
adapters. Note that this bug shouldn’t have affected vcr
users as httr is in Imports in that package, so you’d have
to have httr installed (#45) thanks to @maelle for uncovering the
problemhttr; see
HttrAdapter for the details; webmockr now
integrates with two HTTP R packages: crul and
httr (#43) (#44)httr integration is a new method
httr_mock() to turn on mocking for httr; and
two methods build_httr_response and
build_httr_request meant for internal usevcr (now on
CRAN) for doing HTTP request cachingenabled() to ask if webmockr
is enabled, gives a booleanwi_th() gains new parameter .list as an
escape hatch to avoid NSE. examples added in the wi_th man
file to clarify its use?stub_request
(#36)crul handles all types
of matches (#29)crul versionResponse class that was not dealing with
capitalization correctlyto_raise() to say that a matched response
should return a certain exception, currently to_raise
accepts error classes from the fauxpas package (#9)to_timeout() to say that a matched
response should return a timeout. This is a special case of
to_raise to easily do a timeout expectation (#11)request_registry() to list requests in the
request registry (#23)crul moved to Imports from Suggests as it’s the
only http client supported for now. will move back to Suggests once we
support at least one other http clientwebmockr_configure() changes: turn_on has
been removed; allow_net_connect and
allow_localhost were ignored before, but are now used and
are now set to FALSE by default; fixed usage of
allow which now accepts character vector of URLs instead of
a boolean; the following correctly marked as being ignored for now until
fixed net_http_connect_on_start,
show_stubbing_instructions,
query_values_notation, show_body_diff (#19)
(#21)webmockr_disable_net_connect() now accepts an
allow parameter to disable all other connections except
those URLs given in allowwebmockr_net_connect_allowed() now accepts a
uri parameter to test if a URI/URL is allowedstub_registry() and
stub_registry_clea() manual files (#24)build_crul_request and
build_crul_response moved outside of the
CrulAdapter class so that they can be accessed like
webmockr:: in other packagesenable() and disable() now return booleans
invisiblyto_return() method,
and docs details on what to input to the methodwi_th() method, and
docs details on what to input to the methodallow_localhost, which wasn’t actually
workin before (#25)webmockr_enable() and webmockr_disable are
now defunct. Use webmockr::enable() and
webmockr::disable() instead
Need a high-speed mirror for your open-source project?
Contact our mirror admin team at info@clientvps.com.
This archive is provided as a free public service to the community.
Proudly supported by infrastructure from VPSPulse , RxServers , BuyNumber , UnitVPS , OffshoreName and secure payment technology by ArionPay.