predict_work_till_distance()
functionmodel_timing_gates_FD_fixed() and
model_time_distance_FD_fixed() which allow user to set the
fixed FD parameter. This was before done using additional
parameter in model_timing_gates_FD() and
model_time_distance_FD() functions, but now these functions
only provide estimated FD. This is done to allow confidence
intervals estimation, which was impossible to do since fixed
FD was also estimated, but it was constrained by
the optimization function to user-provided value.model_in_situ() function, the filtering parameters
(velocity_threshold, velocity_step, and
n_observations) are returned in the
corrections element of the returned object. These are also
returned in the CV element of the returned object for every
cross-validation foldvelocity_threshold parameter in the
model_in_situ() function is now by default
NULL, in which case the velocity of the observation with
the fastest acceleration is taken as the cutoff valuetheme_bw() from README and set default
ggplot theme with ggdist::ggdist()find_optimal_FV_scalar() function
and all upper-level calling functions which happens when
resistance parameter is below zerosplit_times since it has AsIs
object, causing issues with ggplot2 plotting in the README
filemodel_radar_gun() and
model_laser_gun() examples that happened on
r-release-macos-arm64 and r-oldrel-macos-arm64
due to the perfect model fit causing “singular gradient matrix at
initial parameter estimates”. This is sorted by adding simple noise to
the simulated datamodel_in_situ() function to now use
minpack.lm::nlsLM() instead of stats::lm()
function, which now estimates MSS and MAC
parameters, and it is thus easier to read the code, and estimate the
confidence intervalsget_air_resistance()
function where both head wind and tail wind returned the same
resistance.make_FV_profile() function when
estimating force-velocity profile with wind conditions.convert_FV() function when
converting force-velocity profile back to acceleration-velocity profile
with wind conditions.make_FV_profile() function to
create_FVP().convert_FV() function to
convert_FVP().predict_kinematics() function
relative_power to power_relative to be in
alignment with other variables.work, average_power, and
average_power_relative to the output of
predict_kinematics() function, and removed
net_horizontal_force from the output to avoid confusion
whether the inertia is included or not.shorts_model_fit() function to return
model fit metrics in both absolute and percentage forms.model_sprint() wrapper function and
updated internal new_shorts_model() constructor which
provide changes in the model output format ("shorts_model"
class). This will create BREAK CHANGE from the previous
versions of the {shorts} package.predict_work_till_time() and
predict_work_till_distance() to calculate horizontal work
performance.model_radar_gun() and added alias
model_laser_gun() function.model_timing_gates(),
model_timing_gates_TC(),
model_timing_gates_FD(), and
model_timing_gaes_FD_TC(), functions. Now the
TC parameter has positive sign.model_tether() and
model_tether_DC() functions. Changed the sign of the
DC parameter.model_ family of functions to include
predict_ function in the model definition. Now
MSS and MAC are estimated, rather than
MSS and TAU. This improves readability of the
model definition. Also moved MAC in the output after
MSS parameter.model_timing_gates_FD_TC() function.model_timing_gates_DC() and
model_timing_gates_TC_DC() functions.model_in_situ() function which performs
embedded (i.e., in-situ) analysis of the session
monitoring data using GPS or LPS systems which provide instantaneous
acceleration and velocity.model_time_distance(),
model_time_distance_TC(),
model_time_distance_DC(),
model_time_distance_TC_DC(), and
model_time_distance_FD() functions. These are exactly the
same as model_timing_gates family of functions, but with
reverse predictor and outcome variables.create_sprint_trace() function for quickly
creating sprint traces with time- and distance-shifts, as well as flying
starts. Useful for creating examples for issues in modeling sprint
traces."shorts_model" class. The plot method now plots four
different types of plots, depending on the type argument:
“model” (default), “kinematics-time”, “kinematics-distance”, or
“residuals”.confint S3 method to provide confidence intervals
of the parameters.coef S3 method to return all model parameters,
not only sprint parameters.model_ family of
functions.LPS_session dataset. This dataset represents a
sample data provided by Local Positioning System (LPS) on a single
individual performing a single basketball practice session (aprox.
90min). Sampling frequency is 20Hz.dynaspeed dataset.laser_gun_data dataset.inertia (mass; in kg) and resistance
(force; in Newtons) to predict_force_,
predict_power_, predict_relative_power_, as
well as predict_kinematics() functions. This increases the
ability of the {shorts} package to deal with external resistance, like
weight vest, sled, and tether devices.predict_kinematics() function to include
inertia (mass; in kg) and resistance (force;
in Newtons) parameters, as well as to allow the user to either provide
the shorts_model object, or provide MSS and
MAC parameters. Additional parameter
add_inertia_to_vertical to allow user to decided whether
inertia should be added to bodymass when calculating
vertical force.predict_force_at_velocity() functionfind_max_power_ and
find_power_critial_ function to add support for the
inertia (mass; in kg) and resistance (force;
in Newtons) parametersmake_FV_profile() function and added support
for the inertia (mass; in kg) and resistance
(force; in Newtons) parameters. Removed the S3 print and plot methods,
as well as the class type involving this functionconvert_FV() function available for the
users and added support for the inertia (mass; in kg) and
resistance (force; in Newtons) parameterspredict_time_at_distance_FV() function to use
simpler convert_FV() functionfind_max_power functions to
find_peak_power to avoid confusion between
Pmax and Ppeakinertia (mass; in kg) and
resistance (force; in Newtons) to optimal_FV()
functioninertia (mass; in kg) and
resistance (force; in Newtons) to probe_FV()
functionmodel_tether_DC() function with an
additional distance correction (DC) parameter estimate. DC
parameter serves as an intercept when distance doesn’t start at
zerouse_observed_MSS parameter to
model_radar_gun() and model_tether()
functions. This allows user to estimate MSS parameter from
the observed dataFD parameter to
model_timing_gates_FD() and
model_timing_gates_FD_TC() functions, which allow user to
provide fixed FD parameter value.predict() function not to return fitted
values, but to use generic predict method on the object. This allows
user to use newdata parameter. Added fitted()
method to return fitted values insteadFV_slope_perc to profile_imb
in the output of the optimal_ functionsfind_optimal_FV() and
find_optimal_FV_peak() are now wrapped inside the
optimal_FV, but the method is selected using
method parameter (“max” for find_optimal_FV()
and “peak” for find_optimal_FV_peak()). Please refer to
examplesoptimal_ functions
and moved to probe_FV() and probe_MSS_MAC()
functions. Please refer to examplesfind_optimal_distance() function that can take
other optimal and probe functions as parameter. Please refer to
examplesfind_optimal_FV_peak() (now
implemented in find_optimal_FV() function using
method="peak" parameter) where information needed to
calculate air resistance was not forwardedfind_optimal_MSS_MAC() and find_optimal_FV()
functions. Some of the columns are renamed to better clarityconvert_FV() to convert from FV
profile to sprint profile. This is used to calculate Peak Power
(Ppeak) metric and its locationmin_func parameter to
find_optimal_MSS_MAC_distance() and
find_optimal_FV_distance(). This allows to optimize by
using any other metricfind_optimal_FV_peak() function, which optimize
the profile while keeping the Peak Power the same. Accompanying
find_optimal_FV_peak_distance() is also addedformat_splits()model_tether() function for modeling data output
from tether devices, which involve velocity at distancePmax_relative to Pmax_rel in
the output of the make_FV_profile() functionF0_poly,
F0_poly_rel, V0_poly, Pmax_poly,
Pmax_poly_rel, and FV_slope_poly to the output
of the make_FV_profile() function using the method outlined
in Pierre Samozino and Nicolas Peyror, et al (2021) <doi:
10.1111/sms.14097>predict_time_at_distance_FV() which uses FV
profile’s F0 and V0 to predict time at
distance. For more info see Pierre Samozino and Nicolas Peyror, et al
(2021) <doi: 10.1111/sms.14097>find_optimal_MSS_MAC(),
find_optimal_MSS_MAC_distance(),
find_optimal_FV(), find_optimal_FV_distance().
For more info on the FV optimization see Pierre Samozino and Nicolas
Peyror, et al (2021) <doi: 10.1111/sms.14097>This is NEW version of the {shorts} package INCOMPATIBLE with the previous due to drastic changes in functions. Here are the changes utilized:
predict_ functions, time_correction and
distance_correction are no longer used, since due to novel
models of estimation, it is hard to neatly implement them into
functions. Now the predict_ functions predict on a scale
where sprint starts at t=0 and d=0, rather
than on the original (data) scale. This will also remove the confusion
for the user.predict_ functions, the user now uses
MSS and MAC parametersstats::nls() to minpack.lm::nlsLM() in
model_ functions. This is done to avoid “singular gradient”
error and inability of the stats::nls() to estimate when
there are zero residuals. Please make note that now when you use
... in model_ function, it will be forwarded
to minpack.lm::nlsLM(). If you have been using
control = stats::nls.control(warnOnly = TRUE) to avoid
stats::nls() to throw error when fitting when there are
zero residuals, now you can remove it. If needed use
control = minpack.lm::nls.lm.control() instead.create_timing_gates_splits() function to generate
timing gates splitsmodel_timing_gates(),
model_timing_gates_TC(),
model_timing_gates_FD(), and
model_timing_gates_FD_TC(). All other functions have been
removedmodel_radar_gun() which also estimates time correction
(TC) parameter.model_radar_gun() feature n-folds
cross-validation, as opposed to
model_timing_gates() family of functions, which features
leave-one-out cross-validation (LOOCV) due to small number of
observations. Using the CV parameter, set n-fold
cross-validations for the model_radar_gun() function.LOOCV in the
shorts_model object to CV to reflect above
changes in model_radar_gun() functionmodel_using_splits_with_distance_correction() function the
predict_XXX_at_distance() family of functions doesn’t work
correctly if distance_correction is used as parameter
(i.e., different than zero). This is because the model definition is
completely different, and predicting on the same distance scale is not
possible. Please refer to Jovanović, M., Vescovi, J.D. (2020) for more
information.plot.shorts_fv_profile() functionresiduals() S3 method, as well as with internal
function shorts_model_fit() that provides model fit
estimates (i.e. RMSE, MAE, MAPE)model_using_splits_with_distance_correction()
function that implements novel model definition to estimate flying start
distancemixed_model_using_splits_with_distance_correction()
function that implements novel model definition to estimate flying start
distanceggplot2 and tidyr package dependency
and implemented it in S3 plotting functionsget_FV_profile now return a object class
shorts_fv_profileshorts_fv_profile
objectforce and relative_force to
horizontal_force and relative_horizontal_force
in the shorts_fv_profile object and data frame returned by
the predict_kinematicsacceleration, bodymass,
net_horizontal_force, air_resistance, and
vertical_force, resultant_force_relative,
power, and force_angle in the
shorts_fv_profile object and data frame returned by the
predict_kinematicsshorts_model and
shorts_mixed_model objectsAdded sample radar gun data from Jean-Benoît Morin Microsoft
Excel spreadsheet, freely available at his website
(accessed October 27, 2020)). For more information
?jb_morin
Added get_FV_profile for generating Force-Velocity
profile summary using Pierre Samozino and Jean-Benoît Morin method (for
more DOI:10.1111/sms.12490)
get_air_resistance function to estimate air
resistance in newtonspredict_air_resistance_at_time and
predict_air_resistance_at_time functionspredict_force_at_time and
predict_force_at_distance functionspredict_power_at_time and
predict_power_at_distance functionspredict_relative_power_at_distance and
predict_relative_power_at_time use air resistance to do the
calculations. The default bodymass is 75kg. To replicate earlier
function behavior, use predict_velocity_at_ multiplied by
predict_acceleration_at_ to get relative power without air
resistancepredict_kinematics now uses aforementioned
changes in predict_relative_power_ functions, and added
force and air resistance in the outputfind_max_power_distance and
find_power_critical_distance now uses aforementioned
changes and returns absolute power, rather than relative, and air
resistance is used in the power calculationsfind_max_power_time,
find_velocity_critical_time,
find_acceleration_critical_time, and
find_power_critical_time functionsmodel_using_radar_with_time_correction where
time_correction parameter is estimatedmixed_model_using_radar_with_time_correction
where time_correction parameter is estimateddata("vescovi")). For more info see
?vescovitime_correction and
distance_correction to all model parameters output to align
thempredict_kinematics function that predicts 0-6s
distance (100Hz), velocity, acceleration, and relative powerprint, coef,
summary, predict, and residuals
methodsrandom parameter to mixed_ family of
functions to allow higher flexibility in model definitions, but removed
corrections_as_random_effects parameter. The default
behavious is to use all parameters as random effects.... to model_using_radar and
mixed_model_using_radar to be forwarded to
nlme::nlmesprint-corrections vignette by adding a
short simulation studytime_delay to time_correction in
shorts::model_using_instant_velocity and
shorts::mixed_model_using_instant_velocity functions to be
more consistent across functions. Also, this correction is
added to time, so use negative numbers insteadtime_correction in
shorts::mixed_model_using_instant_velocity and
shorts::mixed_model_using_split_times is now numeric
vector, not column nametime_correction in
shorts::model_using_split_times and
shorts::mixed_model_using_split_timestime_correction in
shorts:predict_ family of functionsdistance_correction in
shorts:predict_ family of functionstime_correction in
shorts::model_using_split_times_with_time_correction and
shorts::mixed_model_using_split_times_with_time_correctiondistance_correction in
shorts::model_using_split_times_with_corrections and
shorts::mixed_model_using_split_times_with_correctionsshorts::mixed_model_
functionsmaxAbsErr from model_fit elementfind_ family of functions for finding max
power and critical distance when velocity or acceleration reaches
certain threshold... to all modeling functions so that extra
parameters can be forwarded to the optimization enginesplit_times recreated using distance shift behind
the first timing gate. Needed to demo mixed models with corrections_model_using_instant_velocity to
_model_using_radar_model_using_split_times_ to
_model_using_splits_
Need a high-speed mirror for your open-source project?
Contact our mirror admin team at info@clientvps.com.
This archive is provided as a free public service to the community.
Proudly supported by infrastructure from VPSPulse , RxServers , BuyNumber , UnitVPS , OffshoreName and secure payment technology by ArionPay.