Lüdecke D (2018). ggeffects: Tidy Data Frames of Marginal Effects from Regression Models. Journal of Open Source Software, 3(26), 772. doi: 10.21105/joss.00772
After fitting a model, it is useful generate model-based estimates (expected values, or adjusted predictions) of the response variable for different combinations of predictor values. Such estimates can be used to make inferences about relationships between variables - adjusted predictions tell you: what is the expected ouctome for certain values or levels of my predictors?
Adjusted predictions or marginal means are often easier to understand than raw regression coefficients. In particular, their visualization allows to intuitively get the idea of how predictors and outcome are associated, even for complex models.
ggeffects is a light-weight package that aims at easily calculating adjusted predictions and estimated marginal means at meaningful values of covariates from statistical models. Furthermore, it is possible to compute contrasts or pairwise comparisons, to test predictions and differences in predictions for statistical significance. Finally, you can easily produce nice figures to visualize the results.
What you basically would need for your workflow is:
predict_response() (understand your results)test_predictions() (check for “significant”
results)plot() (communicate your results)Three core ideas describe the philosophy of the function design and help users to achieve the above mentioned goals:
Functions are type-safe and always return a data frame with the same, consistent structure;
there is a simple, unique approach to calculate adjusted predictions and estimated marginal means for many different models;
the package supports “labelled data” (Lüdecke 2018), which allows human readable annotations for graphical outputs.
This means, users do not need to care about any expensive steps after
modeling to visualize the results. The returned as data frame is ready
to use with the ggplot2-package, however, there is also
a plot()-method to easily create publication-ready
figures.
Adjusted predictions or estimated marginal means are always calculated on the response scale, which is the easiest and most intuitive scale to interpret the results.
It is easy to start, you just need one function:
predict_response(), and two arguments: the model and the
“focal terms”, i.e. the predictors that you are mainly interested in.
Examples are shown below.
You should use ggeffects…
… when you want to understand how predictors and outcome are related, no matter whether you have simple or complex models, interaction or transformed terms. See how to start in this vignette. The syntax for the ggeffects functions is super easy and consistent across the different type of models and complexity.
… when you want to perform pairwise comparisons, in order to see whether there are statistically significant differences in the association of, for instance, different groups or categories of your predictors and your outcome (“effects”, or sometimes “marginal effects”). There are several vignettes describing this in detail, starting with this vignette.
… when you need impressive figures instead of long, confusing tables to describe your results. There are several examples in the documentation, for example this vignette.
… and even when you want to check, whether your model appropriately describes your data. See this vignette to learn more about how to use ggeffects for model diagnostics.
A workflow in R would then include using following functions in this
order: predict_response(), plot(), and
test_predictions() - that’s all you need! See also this
example workflow using logistic regression.
| Type | Source | Command |
|---|---|---|
| Release | CRAN | install.packages("ggeffects") |
| Development | r - universe | install.packages("ggeffects", repos = "https://strengejacke.r-universe.dev") |
| Development | GitHub | remotes::install_github("strengejacke/ggeffects") |
Or you can run ggeffects::install_latest()
to install the latest development version from r-universe.
predict_response() is a wrapper around three “workhorse”
functions, ggpredict(), ggemmeans() and
ggaverage(). Depending on the value of the
margin argument, predict_response() calls one
of those functions, with different arguments. It’s important to note
that:
Predictions are always returned on the response scale, no matter which model is used. This is the most intuitive scale to interpret your results (the predicted values).
The response is predicted at the values or levels of your
focal terms, i.e. you specify the predictors you are mainly
interested in, using the terms argument. The predicted
values are calculated for these values, while all other predictors are
marginalized over.
The margin argument in predict_response()
indicates how to marginalize over the non-focal predictors,
i.e. those variables that are not specified in
terms. Each option answers slightly different questions.
Possible values are:
"mean_reference" and "mean_mode":
"mean_reference" calls ggpredict(),
i.e. non-focal predictors are set to their mean (numeric variables),
reference level (factors), or “most common” value (mode) in case of
character vectors. "mean_mode" calls
ggpredict(typical = c(numeric = "mean", factor = "mode")),
i.e. non-focal predictors are set to their mean (numeric variables) or
mode (factors, or “most common” value in case of character vectors).
Question answered: “What is the predicted (or: expected) value of the response at meaningful values or levels of my focal terms for a ‘typical’ observation in my data?”, where ‘typical’ refers to certain characteristics of the remaining predictors.
"marginalmeans": calls ggemmeans(),
i.e. non-focal predictors are set to their mean (numeric variables) or
marginalized over the levels or “values” for factors and character
vectors. Marginalizing over the factor levels of non-focal terms
computes a kind of “weighted average” for the values at which these
terms are hold constant. There are different weighting options that can
be chosen with the weights argument.
Question answered: “What is the predicted (or: expected) value of the response at meaningful values or levels of my focal terms for an ‘average’ observation in my data?”. It refers to randomly picking a subject of your sample and the result you get on average.
"empirical" (or "counterfactual"):
calls ggaverage(), i.e. non-focal predictors are
marginalized over the observations in your sample. The response is
predicted for each subject in the data and predicted values are then
averaged across all subjects, aggregated/grouped by the focal terms.
Averaging is applied to “counterfactual” predictions (Dickerman and
Hernán 2020). There is a more detailed description in this
vignette.
Question answered: “What is the predicted (or: expected) value of the response at meaningful values or levels of my focal terms for the ‘average’ observation in the population?”. It does not only refer to the actual data in your sample, but also “what would be if” we had more data, or if we had data from a different population.
And what about marginal effects? Marginal effects
refer to the difference between two adjacent predictions. They are not
the same as marginal means or adjusted predictions. However, calculating
contrasts or pairwise comparisons with test_predictions()
can be used to test for differences in predictions (aka marginal
effects).
Here’s an example:
library(ggeffects)
library(marginaleffects)
m <- lm(Petal.Width ~ Petal.Length + Species, data = iris)
# we want the marginal effects for "Species". We can calculate
# the marginal effect using the "marginaleffects" package
marginaleffects::avg_slopes(m, variables = "Species")
#>
#> Contrast Estimate Std. Error z Pr(>|z|) S 2.5 %
#> mean(versicolor) - mean(setosa) 0.435 0.103 4.23 <0.001 15.4 0.234
#> mean(virginica) - mean(setosa) 0.838 0.145 5.76 <0.001 26.9 0.553
#> 97.5 %
#> 0.637
#> 1.123
#>
#> Term: Species
#> Type: response
#> Columns: term, contrast, estimate, std.error, statistic, p.value, s.value, conf.low, conf.high, predicted_lo, predicted_hi, predicted
# here we show that marginal effects refer to the difference between
# predictions for a one-unit change of "Species"
out <- predict_response(m, "Species", margin = "empirical")
out
#> # Average predicted values of Petal.Width
#>
#> Species | Predicted | 95% CI
#> -----------------------------------
#> setosa | 0.77 | 0.61, 0.94
#> versicolor | 1.21 | 1.15, 1.27
#> virginica | 1.61 | 1.48, 1.74
# marginal effects of "versicolor", relative to "setosa"
out$predicted[2] - out$predicted[1]
#> [1] 0.44
# marginal effects of "virginica", relative to "setosa"
out$predicted[3] - out$predicted[1]
#> [1] 0.84
# finally, test_predictions() returns the same. while the previous results
# report the marginal effect compared to the reference level "setosa",
# test_predictions() returns the marginal effects for all pairwise comparisons
test_predictions(m, "Species")
#> # Pairwise comparisons
#>
#> Species | Contrast | 95% CI | p
#> -------------------------------------------------------
#> setosa-versicolor | -0.44 | -0.64, -0.23 | < .001
#> setosa-virginica | -0.84 | -1.12, -0.55 | < .001
#> versicolor-virginica | -0.40 | -0.52, -0.29 | < .001Please visit https://strengejacke.github.io/ggeffects/ for documentation and vignettes. For questions about the functionality, you may either contact me via email or also file an issue.
Adjusted predictions can be calculated for many different models. Currently supported model-objects are: averaging, bamlss, bayesx, betabin, betareg, bglmer, bigglm, biglm, blmer, bracl, brglm, brmsfit, brmultinom, cgam, cgamm, clm, clm2, clmm, coxph, feglm, fixest, flac, flic, gam, Gam, gamlss, gamm, gamm4, gee, geeglm, glimML, glm, glm.nb, glm_weightit, glmer.nb, glmerMod, glmgee, glmmPQL, glmmTMB, glmrob, glmRob, glmx, gls, hurdle, ivreg, lm, lm_robust, lme, lmerMod, lmrob, lmRob, logistf, logitr, lrm, mblogit, mclogit, MCMCglmm, merModLmerTest, MixMod, mixor, mlogit, multinom, multinom_weightit, negbin, nestedLogit, nlmerMod, ols, ordinal_weightit, orm, phyloglm, phylolm, plm, polr, rlm, rlmerMod, rq, rqs, rqss, sdmTMB, speedglm, speedlm, stanreg, survreg, svyglm, svyglm.nb, tidymodels, tobit, truncreg, vgam, vglm, wblm, wbm, Zelig-relogit, zeroinfl, zerotrunc.
Support for models varies by marginalization method (the
margin argument), i.e. although
predict_response() supports most models, some models are
only supported exclusively by one of the four downstream functions
(ggpredict(), ggemmeans(),
ggeffect() or ggaverage()). This means that
not all models work for every margin option of
predict_response(). Other models not listed here might work
as well, but are currently not tested.
Interaction terms, splines and polynomial terms are also supported.
There is a generic plot()-method to plot the results using
ggplot2.
The returned data frames always have the same, consistent structure
and column names, so it’s easy to create ggplot-plots without the need
to re-write the function call. x and predicted
are the values for the x- and y-axis. conf.low and
conf.high could be used as ymin and
ymax aesthetics for ribbons to add confidence bands to the
plot. group can be used as grouping-aesthetics, or for
faceting.
predict_response() requires at least one, but not more
than four terms specified in the terms-argument. Predicted
values of the response, along the values of the first term are
calculated, optionally grouped by the other terms specified in
terms.
library(ggeffects)
library(splines)
library(datawizard)
data(efc, package = "ggeffects")
efc <- to_factor(efc, c("c161sex", "e42dep"))
fit <- lm(barthtot ~ c12hour + bs(neg_c_7) * c161sex + e42dep, data = efc)
predict_response(fit, terms = "c12hour")
#> # Predicted values of barthtot
#>
#> c12hour | Predicted | 95% CI
#> ----------------------------------
#> 4 | 89.91 | 84.18, 95.63
#> 12 | 89.34 | 83.62, 95.06
#> 22 | 88.63 | 82.90, 94.36
#> 36 | 87.64 | 81.88, 93.40
#> 49 | 86.72 | 80.90, 92.53
#> 70 | 85.23 | 79.30, 91.16
#> 100 | 83.10 | 76.92, 89.29
#> 168 | 78.28 | 71.24, 85.33
#>
#> Adjusted for:
#> * neg_c_7 = 11.83
#> * c161sex = Male
#> * e42dep = independentA possible call to ggplot could look like this:
library(ggplot2)
mydf <- predict_response(fit, terms = "c12hour")
ggplot(mydf, aes(x, predicted)) +
geom_line() +
geom_ribbon(aes(ymin = conf.low, ymax = conf.high), alpha = 0.1)
However, there is also a plot()-method. This method uses
convenient defaults, to easily create the most suitable plot for the
predictions.
mydf <- predict_response(fit, terms = "c12hour")
plot(mydf)
With three variables, predictions can be grouped and faceted.
result <- predict_response(fit, terms = c("neg_c_7", "c161sex", "e42dep"))
# we want a more compact table, thus we use `print()` explicitly
print(result, collapse_table = TRUE, collapse_ci = TRUE)
#> # Predicted values of barthtot
#>
#> neg_c_7 | c161sex | e42dep | Predicted (95% CI)
#> -----------------------------------------------------------------
#> 7 | Male | independent | 93.73 (87.01, 100.44)
#> 12 | | | 86.89 (81.09, 92.70)
#> 17 | | | 80.62 (73.69, 87.54)
#> 28 | | | 148.54 (85.66, 211.42)
#> 7 | | slightly dependent | 87.41 (81.27, 93.56)
#> 12 | | | 80.58 (76.32, 84.84)
#> 17 | | | 74.31 (68.46, 80.15)
#> 28 | | | 142.23 (79.71, 204.75)
#> 7 | | moderately dependent | 78.29 (72.08, 84.49)
#> 12 | | | 71.46 (67.64, 75.27)
#> 17 | | | 65.18 (59.75, 70.60)
#> 28 | | | 133.10 (70.44, 195.76)
#> 7 | | severely dependent | 41.93 (35.66, 48.21)
#> 12 | | | 35.10 (30.98, 39.22)
#> 17 | | | 28.82 (23.41, 34.24)
#> 28 | | | 96.75 (34.08, 159.41)
#> 7 | Female | independent | 98.04 (93.06, 103.02)
#> 12 | | | 86.61 (81.85, 91.37)
#> 17 | | | 82.58 (77.33, 87.82)
#> 28 | | | 81.57 (64.41, 98.73)
#> 7 | | slightly dependent | 91.73 (87.89, 95.57)
#> 12 | | | 80.30 (77.43, 83.17)
#> 17 | | | 76.26 (72.57, 79.96)
#> 28 | | | 75.26 (58.64, 91.87)
#> 7 | | moderately dependent | 82.60 (78.62, 86.59)
#> 12 | | | 71.17 (68.79, 73.56)
#> 17 | | | 67.14 (63.95, 70.33)
#> 28 | | | 66.13 (49.52, 82.74)
#> 7 | | severely dependent | 46.25 (41.93, 50.57)
#> 12 | | | 34.82 (32.27, 37.37)
#> 17 | | | 30.78 (27.67, 33.90)
#> 28 | | | 29.78 (13.33, 46.23)
#>
#> Adjusted for:
#> * c12hour = 42.10
ggplot(result, aes(x = x, y = predicted, colour = group)) +
geom_line() +
facet_wrap(~facet)
plot() works for this case, as well:
plot(result)
Next, an example of an interaction term. We want to know whether the two slopes are significantly different from each other.
fit <- lm(neg_c_7 ~ c12hour + barthtot * c161sex + e42dep, data = efc)
result <- predict_response(fit, c("barthtot", "c161sex"))
plot(result)
This can be achieved by test_predictions().
test_predictions(result)
#> # (Average) Linear trend for barthtot
#>
#> c161sex | Contrast | 95% CI | p
#> --------------------------------------------
#> Male-Female | 0.01 | -0.01, 0.03 | 0.466We can conclude that slopes (or “linear trends”) of
barthtot for the different groups of c161sex
are not statistically significantly different from each other.
More features are explained in detail in the package-vignettes.
In case you want / have to cite my package, please use
citation('ggeffects') for citation information:
Lüdecke D (2018). ggeffects: Tidy Data Frames of Marginal Effects from Regression Models. Journal of Open Source Software, 3(26), 772. doi: 10.21105/joss.00772