## ----setup, include = FALSE---------------------------------------------------
library(transfR)
knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>"
)

## ----echo=TRUE, message=FALSE, warning=FALSE, results='hide'------------------
wbt_wd <- tempdir(check = TRUE)

## ----download_dem, echo=TRUE, message=FALSE, warning=FALSE, eval=FALSE, results='hide'----
# library(elevatr)
# library(progress) # Needed by elevatr
# 
# # Set up a projection (French Lambert-93 projection)
# EPSG <- 2154
# 
# # Define a bbox that will encompass the catchments of the study area
# blavet_bbox <- st_bbox(c(xmin = -3.3, xmax = -2.7, ymax = 48.11, ymin = 47.77),
#                            crs = st_crs(4326))
# blavet_loc <- st_as_sfc(blavet_bbox) |> st_sf()
# 
# # Retrieve elevation data as raster
# dem_raw <- elevatr::get_elev_raster(blavet_loc, z = 10) # ~76m resolution
# 
# # Project and define spatial resolution:
# dem_100m  <- st_warp(st_as_stars(dem_raw), cellsize = 100, crs = st_crs(EPSG))
# names(dem_100m) <- "warp"
# 
# # Set negative values (ocean) to NA
# dem_100m[dem_100m < 0] <- NA
# 
# # Write to file
# write_stars(dem_100m["warp"], file.path(wbt_wd,"dem_100m.tif"))

## ----echo=FALSE, message=FALSE, warning=TRUE, eval=TRUE, results='hide'-------
try_chunk <- try({
library(elevatr)
library(progress) # Needed by elevatr

# Set up a projection (French Lambert-93 projection)
EPSG <- 2154 

# Define a bbox that will encompass the catchments of the study area
blavet_bbox <- st_bbox(c(xmin = -3.3, xmax = -2.7, ymax = 48.11, ymin = 47.77), 
                           crs = st_crs(4326))
blavet_loc <- st_as_sfc(blavet_bbox) |> st_sf()

# Retrieve elevation data as raster
dem_raw <- elevatr::get_elev_raster(blavet_loc, z = 10) # ~76m resolution

# Project and define spatial resolution: 
dem_100m  <- st_warp(st_as_stars(dem_raw), cellsize = 100, crs = st_crs(EPSG))
names(dem_100m) <- "warp"

# Set negative values (ocean) to NA
dem_100m[dem_100m < 0] <- NA

# Write to file
write_stars(dem_100m["warp"], file.path(wbt_wd,"dem_100m.tif"))
}, silent = TRUE)
if(inherits(try_chunk, "try-error")){
  warning("\nIssue when downloading elevation data. \nThe vignette will not be fully built.")
  running <- FALSE
}else{
  running <- TRUE
}

## ----install_whitebox, echo=FALSE, message=FALSE, warning=TRUE, eval=running, results='hide'----
# If WhiteboxTools executable are not present, install it in the temporary directory
library(whitebox)
if(!wbt_init()){
  wbt_inst <- try(install_whitebox(pkg_dir = wbt_wd), silent = TRUE)
  if(!inherits(wbt_inst, "try-error")){
    exe_path <- file.path(wbt_wd, "WBT", "whitebox_tools") # Unix
    if(!file.exists(exe_path)) exe_path <- paste0(exe_path,".exe") # Windows
    if(!file.exists(exe_path)){
      warning("WhiteboxTools executable not found")
      running <- FALSE
    }else{
        wbt_options(exe_path = exe_path,
                max_procs = 2,
                wd = wbt_wd,
                verbose = TRUE)
      }
    }else{running <- FALSE}
  }else{
    wbt_options(max_procs = 2,
                wd = wbt_wd,
                verbose = TRUE)
  }

## ----burn_stream, echo=TRUE, message=FALSE, warning=FALSE, eval=FALSE, results='hide'----
# library(transfR)
# library(whitebox)
# 
# # Get the French Topage river network from the Blavet dataset
# data(Blavet)
# CoursEau_Topage2019 <- Blavet$network
# 
# # Change projection and write files
# network_topage <- st_transform(CoursEau_Topage2019, EPSG)
# st_write(network_topage, file.path(wbt_wd, "network_topage.shp"),
#              delete_layer = TRUE, quiet = TRUE)
# whitebox::wbt_rasterize_streams("network_topage.shp",
#                                 base = "dem_100m.tif",
#                                 output = "network_topage.tif",
#                                 nodata = 0,
#                                 wd = wbt_wd)
# 
# # Burn this river network on the DEM
# # We will neglect the effect of the road embankments at this DEM resolution of 100m
# # by creating an empty shapefile for roads
# st_write(st_sfc(st_multilinestring(),crs = EPSG), file.path(wbt_wd,"roads.shp"),
#              delete_layer = TRUE, quiet = TRUE)
# whitebox::wbt_burn_streams_at_roads(dem = "dem_100m.tif",
#                         streams = "network_topage.shp",
#                         roads = "roads.shp",
#                         output = "dem_100m_burn.tif",
#                         wd = wbt_wd)

## ----echo=FALSE, message=FALSE, warning=TRUE, eval=running, results='hide'----
try_chunk <- try({
library(transfR)
library(whitebox)

# Get the French Topage river network from the Blavet dataset
data(Blavet)
CoursEau_Topage2019 <- Blavet$network

# Change projection and write files
network_topage <- st_transform(CoursEau_Topage2019, EPSG)
st_write(network_topage, file.path(wbt_wd, "network_topage.shp"), 
             delete_layer = TRUE, quiet = TRUE)
whitebox::wbt_rasterize_streams("network_topage.shp", 
                                base = "dem_100m.tif", 
                                output = "network_topage.tif", 
                                nodata = 0, 
                                wd = wbt_wd)

# Burn this river network on the DEM
# We will neglect the effect of the road embankments at this DEM resolution of 100m 
# by creating an empty shapefile for roads
st_write(st_sfc(st_multilinestring(),crs = EPSG), file.path(wbt_wd,"roads.shp"), 
             delete_layer = TRUE, quiet = TRUE)
whitebox::wbt_burn_streams_at_roads(dem = "dem_100m.tif", 
                        streams = "network_topage.shp", 
                        roads = "roads.shp",
                        output = "dem_100m_burn.tif", 
                        wd = wbt_wd)
}, silent = TRUE)
if(inherits(try_chunk, "try-error")){
  warning("\nIssue when burning the river network on the DEM. \nThe vignette will not be fully built.")
  running <- FALSE
}

## ----extract_stream, echo=TRUE, message=FALSE, warning=FALSE, eval=FALSE, results='hide'----
# # Remove the depressions on the DEM
# whitebox::wbt_fill_depressions(dem = "dem_100m_burn.tif",
#                                output = "dem_fill.tif",
#                                wd = wbt_wd)
# 
# # Flow direction raster
# whitebox::wbt_d8_pointer(dem = "dem_fill.tif",
#                          output = "d8.tif",
#                          wd = wbt_wd)
# 
# # Compute flow accumulation
# whitebox::wbt_d8_flow_accumulation(input = "d8.tif",
#                                    pntr = TRUE,
#                                    output ="facc.tif",
#                                    wd = wbt_wd)
# 
# # Extract a stream network (threshold = 1 km2) consistent with flow direction
# whitebox::wbt_extract_streams(flow_accum =  "facc.tif",
#                               threshold = 100, # 100 cells for 1 km2
#                               output = "network_1km2.tif",
#                               zero_background = TRUE,
#                               wd = wbt_wd)
# whitebox::wbt_remove_short_streams(d8_pntr = "d8.tif",
#                                    streams = "network_1km2.tif",
#                                    output = "network_d8.tif",
#                                    min_length= 200,
#                                    wd = wbt_wd)

## ----echo=FALSE, message=FALSE, warning=TRUE, eval=running, results='hide'----
try_chunk <- try({
# Remove the depressions on the DEM
whitebox::wbt_fill_depressions(dem = "dem_100m_burn.tif",
                               output = "dem_fill.tif",
                               wd = wbt_wd)

# Flow direction raster
whitebox::wbt_d8_pointer(dem = "dem_fill.tif",
                         output = "d8.tif",
                         wd = wbt_wd)

# Compute flow accumulation
whitebox::wbt_d8_flow_accumulation(input = "d8.tif",
                                   pntr = TRUE,
                                   output ="facc.tif",
                                   wd = wbt_wd)

# Extract a stream network (threshold = 1 km2) consistent with flow direction
whitebox::wbt_extract_streams(flow_accum =  "facc.tif",
                              threshold = 100, # 100 cells for 1 km2
                              output = "network_1km2.tif",
                              zero_background = TRUE,
                              wd = wbt_wd)
whitebox::wbt_remove_short_streams(d8_pntr = "d8.tif",
                                   streams = "network_1km2.tif",
                                   output = "network_d8.tif",
                                   min_length= 200,
                                   wd = wbt_wd)
}, silent = TRUE)
if(inherits(try_chunk, "try-error")){
  warning("\nIssue when extracting the river network from the DEM. \nThe vignette will not be fully built.")
  running <- FALSE
}

## ----delineate_catchments, echo=TRUE, message=FALSE, warning=FALSE, eval=FALSE, results='hide'----
# # Localize the outlets of the studied catchments (with manual adjustments to help snapping)
# outlets_coordinates <- data.frame(id = names(Blavet$hl),
#                              X = c(254010.612,255940-100,255903,237201,273672,265550),
#                              Y = c(6772515.474,6776418-200,6776495,6774304-200,6762681,6783313))
# outlets <- st_as_sf(outlets_coordinates, coords = c("X", "Y"), crs=2154)
# st_write(outlets, dsn = file.path(wbt_wd, "outlets.shp"),
#              delete_layer = TRUE, quiet = TRUE)
# 
# # Snap the outlets on the stream raster
# whitebox::wbt_jenson_snap_pour_points(pour_pts = "outlets.shp",
#                                       streams = "network_d8.tif",
#                                       output = "outlets_snapped.shp",
#                                       snap_dist = 200,
#                                       wd = wbt_wd)
# outlets_snapped <- st_read(file.path(wbt_wd, "outlets_snapped.shp"), quiet = TRUE)
# 
# # Delineate catchments
# catchments <- st_sfc(crs = EPSG)
# for(id in outlets_snapped$id){
#   st_write(outlets_snapped[outlets_snapped$id==id,],
#                file.path(wbt_wd, paste0(id, "_outlet.shp")), delete_layer = TRUE, quiet = TRUE)
#   whitebox::wbt_watershed(d8_pntr = "d8.tif",
#                           pour_pts = paste0(id, "_outlet.shp"),
#                           output = paste0(id, "_catchment.tif"),
#                           wd = wbt_wd)
#   # Vectorize catchments
#   drainage <- read_stars(file.path(wbt_wd, paste0(id, "_catchment.tif")))
#   contours <- st_contour(drainage, breaks = 1) |> st_geometry() |> st_cast("POLYGON")
#   contours <- contours[which.max(st_area(contours))]
#   catchments <- rbind(catchments, st_sf(data.frame(id, geom = contours)))
# }

## ----echo=FALSE, message=FALSE, warning=TRUE, eval=running, results='hide'----
try_chunk <- try({
# Localize the outlets of the studied catchments (with manual adjustments to help snapping)
outlets_coordinates <- data.frame(id = names(Blavet$hl),
                             X = c(254010.612,255940-100,255903,237201,273672,265550),
                             Y = c(6772515.474,6776418-200,6776495,6774304-200,6762681,6783313))
outlets <- st_as_sf(outlets_coordinates, coords = c("X", "Y"), crs=2154)
st_write(outlets, dsn = file.path(wbt_wd, "outlets.shp"), 
             delete_layer = TRUE, quiet = TRUE)

# Snap the outlets on the stream raster
whitebox::wbt_jenson_snap_pour_points(pour_pts = "outlets.shp",
                                      streams = "network_d8.tif",
                                      output = "outlets_snapped.shp",
                                      snap_dist = 200,
                                      wd = wbt_wd) 
outlets_snapped <- st_read(file.path(wbt_wd, "outlets_snapped.shp"), quiet = TRUE)

# Delineate catchments 
catchments <- st_sfc(crs = EPSG)
for(id in outlets_snapped$id){
  st_write(outlets_snapped[outlets_snapped$id==id,], 
               file.path(wbt_wd, paste0(id, "_outlet.shp")), delete_layer = TRUE, quiet = TRUE)
  whitebox::wbt_watershed(d8_pntr = "d8.tif",
                          pour_pts = paste0(id, "_outlet.shp"),
                          output = paste0(id, "_catchment.tif"),
                          wd = wbt_wd)
  # Vectorize catchments
  drainage <- read_stars(file.path(wbt_wd, paste0(id, "_catchment.tif")))
  contours <- st_contour(drainage, breaks = 1) |> st_geometry() |> st_cast("POLYGON")
  contours <- contours[which.max(st_area(contours))]
  catchments <- rbind(catchments, st_sf(data.frame(id, geom = contours)))
}
}, silent = TRUE)
if(inherits(try_chunk, "try-error")){
  warning("\nIssue when delineating catchments. \nThe vignette will not be fully built.")
  running <- FALSE
}

## ----echo=TRUE, message=FALSE, warning=FALSE, eval=running--------------------
# # Compare drainage areas to the dataset provided with transfR
# compare_areas <- data.frame(
#   name = names(Blavet$hl),
#   expected_area =  st_area(st_geometry(Blavet$obs)) |> units::set_units("km^2") |> round(1),
#   computed_area = st_area(catchments) |> units::set_units("km^2") |> round(1)
# )
# 
# print(compare_areas)

## ----echo=TRUE, message=FALSE, warning=FALSE, eval=running, results='hide', fig.width=7, fig.height=4----
# # Plot catchment delineation
# par(oma = c(0, 0, 0, 6))
# plot(catchments[,"id"], main = "Catchments delineation", key.pos = 4, reset = FALSE)
# plot(st_geometry(st_intersection(network_topage,catchments)),
#      col = "white", lwd = 1.5, add = TRUE)
# plot(outlets_snapped, col = "black", pch = 16, add = TRUE)

## ----hydraulic_length, echo=TRUE, message=FALSE, warning=FALSE, eval=FALSE, results='hide'----
# # Compute hydraulic length
# whitebox::wbt_downslope_flowpath_length(d8_pntr = "d8.tif",
#                                         output = "fpl.tif",
#                                         wd = wbt_wd)
# whitebox::wbt_downslope_distance_to_stream(dem = "dem_fill.tif",
#                                            streams = "network_topage.tif",
#                                            output = "d2s.tif",
#                                            wd = wbt_wd)
# fpl <- read_stars(file.path(wbt_wd, "fpl.tif"))
# d2s <- read_stars(file.path(wbt_wd, "d2s.tif"))
# hl_region <- fpl-d2s
# names(hl_region) <- "hl"
# 
# # Crop hydraulic length for each catchment
# hl <- list()
# for(id in catchments$id){
#   crop <- st_crop(hl_region, catchments[catchments$id==id,])
#   crop <- crop-min(crop$hl, na.rm = TRUE)
#   crop$hl <- units::set_units(crop$hl, "m")
#   hl[[id]] <- crop
# }
# 

## ----echo=FALSE, message=FALSE, warning=TRUE, eval=running, results='hide'----
# try_chunk <- try({
# # Compute hydraulic length
# whitebox::wbt_downslope_flowpath_length(d8_pntr = "d8.tif",
#                                         output = "fpl.tif",
#                                         wd = wbt_wd)
# whitebox::wbt_downslope_distance_to_stream(dem = "dem_fill.tif",
#                                            streams = "network_topage.tif",
#                                            output = "d2s.tif",
#                                            wd = wbt_wd)
# fpl <- read_stars(file.path(wbt_wd, "fpl.tif"))
# d2s <- read_stars(file.path(wbt_wd, "d2s.tif"))
# hl_region <- fpl-d2s
# names(hl_region) <- "hl"
# 
# # Crop hydraulic length for each catchment
# hl <- list()
# for(id in catchments$id){
#   crop <- st_crop(hl_region, catchments[catchments$id==id,])
#   crop <- crop-min(crop$hl, na.rm = TRUE)
#   crop$hl <- units::set_units(crop$hl, "m")
#   hl[[id]] <- crop
# }
# 
# }, silent = TRUE)
# if(inherits(try_chunk, "try-error")){
#   warning("\nIssue when computing hydraulic length. \nThe vignette will not be fully built.")
#   running <- FALSE
# }

## ----echo=TRUE, message=FALSE, warning=FALSE, eval=running, results='hide', fig.width=7, fig.height=4----
# i <- 1
# network <- st_geometry(st_intersection(network_topage,catchments[i,]))
# plot(hl[[i]], main = paste("Hydraulic length of catchment", i,"[m]"),
#      col = hcl.colors(20, palette = "Teal"), key.pos = 1, reset = FALSE)
# plot(network, col = "white", lwd = 1.5, add = TRUE)

## ----echo=TRUE, message=FALSE, warning=FALSE, eval=running, results='hide'----
# obs_st <- st_as_stars(list(Qobs = Blavet$obs$Qobs),
#                             dimensions = st_dimensions(
#                               time = st_get_dimension_values(Blavet$obs,1),
#                               space = st_geometry(catchments)))

## ----echo=TRUE, message=FALSE, warning=FALSE, eval=running, results='hide'----
# obs <- as_transfr(st = obs_st, hl = hl)

## ----echo=TRUE, message=FALSE, warning=FALSE, eval=FALSE----------------------
# obs <- quick_transfr(obs, velocity = "brittany2013", parallel = TRUE, cores = 2, cv = TRUE)

## ----echo=TRUE, message=FALSE, warning=FALSE, eval=FALSE----------------------
# obs$st

## ----echo=FALSE, message=FALSE, warning=FALSE, eval=TRUE, results='hide'------
# Cleaning temporary directory
unlink(wbt_wd, recursive = TRUE)

